## Booting kernel from Legacy Image at 02000000 ...
Image Name: Linux-3.5.3
Created: 2013-02-17 21:17:19 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3357144 Bytes = 3.2 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0
Linux version 3.5.3 (adel@adel-Satellite-A100) (gcc version 4.3.3 (Sourcery G++3
CPU: ARMv7 Processor [560f5815] revision 5 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Machine: SolidRun CuBox
Ignoring unrecognised tag 0x41000403
Ignoring unrecognised tag 0x41000404
vmeta size = 268435456, gpu_size = 67108864
gpu_mem start = 0x2c000000
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists in Zone order, mobility grouping off. Total pages: 178816
Kernel command line: console=ttyS0,115200n8 vmalloc=384M root=/dev/mmcblk0p2 ro0
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 704MB = 704MB total **********************************
Memory: 704908k/704908k available, 15988k reserved, 81920K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xe7800000 - 0xff000000 ( 376 MB)
lowmem : 0xc0000000 - 0xe7000000 ( 624 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0639000 (6340 kB)
.init : 0xc0639000 - 0xc066acac ( 200 kB)
.data : 0xc066c000 - 0xc06a3a40 ( 223 kB) *********************************
.bss : 0xc06a3a64 - 0xc06ca850 ( 156 kB)
NR_IRQS:135
sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 25769ms
Console: colour dummy device 80x30
Calibrating delay loop... 789.70 BogoMIPS (lpj=3948544)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
hw perfevents: no hardware support available
Setting up static identity map for 0x4f12e8 - 0x4f131c
devtmpfs: initialized
NET: Registered protocol family 16
Dove 88AP510 SoC, TCLK = 167MHz
Tauros2: Enabling L2 cache.
Tauros2: L2 cache support initialised in ARMv7 mode.
Register vmeta clk
Setting vmeta clock to 500000000 (divider: 4)
LCD0 doesn't use PLL.
Turn on PLL accurate mode.
hw-breakpoint: debug architecture 0x4 unsupported.
Dove PCIe port 0:
link down, ignoring
Dove PCIe port 1:
link down, ignoring
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.25.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource orion_clocksource
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Dove hwmon thermal sensor initialized.
[galcore] GC Version: GC Ver0.8.0.3184-1
galcore options:
irqLine = 48
registerMemBase = 0xF1840000
contiguousSize = 67108863
contiguousBase = 0x2C000000
bankSize = 0x02000000
fastClear = -1
compression = -1
signal = 48
baseAddress = 0x00000000
[galcore] registerBase =0xf1840000, registerMemSize = 0x0003ffff, contiguousBasf
[galcore] streamCount = 1
[galcore] registerMax = 64
[galcore] threadCount = 256
[galcore] shaderCoreCount = 1
[galcore] vertexCacheSize = 8
[galcore] vertexOutputBufferSize = 512
[galcore] real contiguouSize = 0x03ffffff
[galcore] chipModel=0x600,chipRevision=0x19,chipFeatures=0x87ecd,chipMinorFeatu7
highmem bounce pool size: 64 pages
jffs2: version 2.2. (NAND) �© 2001-2006 Red Hat, Inc.
msgmni has been set to 1216
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver
mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
mv_xor mv_xor.2: Marvell XOR: ( xor cpy )
mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy )
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 7) is a 16550A
console [ttyS0] enabled
serial8250.1: ttyS1 at MMIO 0xf1012100 (irq = 8) is a 16550A
brd: module loaded
loop: module loaded
BMM Module Vmeta memroy start: 0x30000000, size: 268435456
BMM init with size=256MB **************************
sata_mv sata_mv.0: cannot get optional clkdev
sata_mv sata_mv.0: slots 32 ports 1
scsi0 : sata_mv
ata1: SATA max UDMA/133 irq 62
orion_spi orion_spi.0: master is unqueued, this is deprecated
m25p80 spi0.0: unrecognized JEDEC id 20ba16
orion_spi orion_spi.1: master is unqueued, this is deprecated
HSI/SSI char device loaded
mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
mv643xx_eth smi: probed
mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address 00:50:43:ba:6
[1] internal addr[0xffd00000],addr[0x10400000] size[524288]
[2] internal addr[0xffdc0000],addr[0x10390000] size[65536]
[3] internal addr[0xffdd9000],addr[0x10325000] size[4096]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
orion-ehci orion-ehci.0: Marvell Orion EHCI
orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
orion-ehci orion-ehci.0: irq 24, io mem 0xf1050000
orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
orion-ehci orion-ehci.1: Marvell Orion EHCI
orion-ehci orion-ehci.1: new USB bus registered, assigned bus number 2
orion-ehci orion-ehci.1: irq 25, io mem 0xf1051000
orion-ehci orion-ehci.1: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usbcore: registered new interface driver cdc_wdm
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver synaptics_usb
rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
i2c /dev entries driver
lirc_dev: IR Remote Control driver registered, major 252 *************
IR NEC protocol handler initialized **
IR RC5(x) protocol handler initialized ****
IR RC6 protocol handler initialized ****
IR JVC protocol handler initialized ******
IR Sony protocol handler initialized ******
IR RC5 (streamzap) protocol handler initialized ******
IR SANYO protocol handler initialized *******
IR MCE Keyboard/mouse protocol handler initialized *******
IR LIRC bridge handler initialized
Registered IR keymap rc-empty *******
input: gpio_ir_recv as /devices/virtual/rc/rc0/input0 *******
rc0: gpio_ir_recv as /devices/virtual/rc/rc0 ********
input: MCE IR Keyboard/Mouse (gpio-rc-recv) as /devices/virtual/input/input1 ***********
rc rc0: lirc_dev: driver ir-lirc-codec (gpio-rc-recv) registered at minor = 0 ********
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
switching to TEMP ****************
ata1: SATA link down (SStatus 0 SControl F300) ***********
mmc0: SDHCI controller on sdhci-dove.0 [sdhci-dove.0] using DMA
mmc0: new SD card at address b83d
mmcblk0: mmc0:b83d SU02G 1.84 GiB
mmcblk0: p1 p2
mmc1: SDHCI controller on sdhci-dove.1 [sdhci-dove.1] using DMA
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
si5351 0-0060: registered si5351 i2c client
si5351 0-0060: external clock setup : clkdev = d0381ea0
cubox_extclk_setup : add alias 'extclk/dovefb.0' to clkout0 w 0
external clock setup done
kirkwood-i2s kirkwood-i2s.1: found external clock **************
kirkwood-spdif-audio kirkwood-spdif-audio.1: ASoC: Failed to create card debugfy ****************
asoc: dit-hifi <-> kirkwood-i2s.1 mapping ok *****************
oprofile: no performance counters
oprofile: using timer interrupt.
TCP: cubic registered
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 5
ThumbEE CPU extension supported.
PJ4 iWMMXt coprocessor enabled.
Dove FB driver:
Initialize /proc/mv_lcd0
use cat /proc/mv_lcd0 to see reg settings
dovefb dovefb.0: use ref clock extclk
o Kernel parameter: 1920x1080-16@60.
o Failed to read EDID information,using driver resolutions table.
found <1920x1080@60>, pixclock=6734
set_clock_divider : setup reference clk to 148500148
Setting HDMI TX resolution to 1920x1080p @ 60
HDMI TX - FOUND exact resolution 16
YC pitch is 0.User program needs refine
Console: switching to colour frame buffer device 240x67
set_clock_divider : setup reference clk to 148500148
Setting HDMI TX resolution to 1920x1080p @ 60
HDMI TX - FOUND exact resolution 16
o dovefb: frame buffer device was successfully loaded.
hdmicec(tda19989) 1.3.0 compiled: Feb 17 2013 22:14:15 -ioctl (2009-10-15)
hdmicec:cec_init:.verbose mode *********************************
hdmicec:this_i2c_probe:called ********************************
hdmicec:this_i2c_probe:HDMI CEC SW Version:1.4 compatibility:0 ***************************
hdmicec declared as a playback device type ********************
hdmicec:cec_standby:on --> standby
hdmitx(tda19989) 1.3.0 compiled: Feb 17 2013 22:14:18 -ioctl (2009-10-15)
HDMI TX SW Version:5.3 compatibility:0
HDMI Int multi-transition
rtc-mv rtc-mv: setting system clock to 2000-08-12 13:51:37 UTC (966088297)
ALSA device list:
#0: Kirkwood S/PDIF
kjournald starting. Commit interval 5 seconds
EXT3-fs (mmcblk0p2): using internal journal
EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
VFS: Mounted root (ext3 filesystem) on device 179:2.
devtmpfs: error mounting -2
Freeing init memory: 196K
Kernel panic - not syncing: No init found. Try passing init= option to kernel..
Partager