Wamp n'interprète plus le PHP

BOnjour a tous,
J'utilise Wampserver depuis de nombreuses années sans aucun probleme. DU jour au lendemain, il a cessé d'interprété le PHP. Tout les services fonctionne mais rien n'est interprété.
Voici ce que donne l'index de wamp:
http://img833.imageshack.us/img833/4440/wampcopie.jpg

une idéee? j'ai pas super envie de tout réinstaller car:
-je suis pas sur que ca marche
- j'ai plein de site et de base de donnée

merci d'avance !

Citation:

---

Envoyé par kataboy

DU jour au lendemain

---

Pas possible. Y a forcément eu un truc qui explique le problème : ajout ou suppression d'un .htaccess, modification de la configuration d'Apache, upgrade de PHP, etc.

A tout hasard, y a des traces suspectes dans l'error_log d'Apache ?

Citation:

---

Pas possible

---

hier tout marchait...j'ai bossé dessus sans probleme. aujourd'hui, ca cplante. Y'a forcément eu un changement quelques part mais je vois pas quoi. J'ai rien fait d'inhabituel.
J'ai effectivement des erreurs dans l'error log mais je ne sais pas les interpréter (sauf les File "does not exist" que je comprend très bien :mrgreen:).

Citation:

---

Wed Sep 08 22:08:07 2010] [notice] Apache/2.2.4 (Win32) PHP/5.2.3 configured -- resuming normal operations
[Wed Sep 08 22:08:07 2010] [notice] Server built: Jan 9 2007 23:17:20
[Wed Sep 08 22:08:07 2010] [notice] Parent: Created child process 4308
[Wed Sep 08 22:08:08 2010] [notice] Child 4308: Child process is running
[Wed Sep 08 22:08:08 2010] [notice] Child 4308: Acquired the start mutex.
[Wed Sep 08 22:08:08 2010] [notice] Child 4308: Starting 250 worker threads.
[Wed Sep 08 22:08:08 2010] [notice] Child 4308: Starting thread to listen on port 80.
[Wed Sep 08 22:08:24 2010] [warn] Cannot get media type from 'x-mapp-php5'
[Wed Sep 08 22:08:25 2010] [error] [client 127.0.0.1] File does not exist: D:/wamp/www/logo_i.gif
[Wed Sep 08 22:08:25 2010] [error] [client 127.0.0.1] File does not exist: D:/wamp/www/favicon.ico
[Wed Sep 08 22:08:28 2010] [error] [client 127.0.0.1] File does not exist: D:/wamp/www/favicon.ico

---

Rien de spécial dans l'error_log. Les erreurs que tu as sont des traces d'erreur 404.

Du coup, pas d'autre choix que de nous donner toute ta configuration Apache et l'éventuel .htaccess qui se trouve à la racine de ton site.

Autre question : quels balises PHP utilises-tu dans ton code ? <? ou <?php ? Donne aussi le contenu du fichier php.ini.

Pour les htaccess, j'ai une dizaine de site, certains utilisant des htaccess d'autre non. Mais a chaque fois, il ne s'agit que de rewriteRule classiques qui fonctionnait très bien hier (genre: RewriteRule ^(.+).html$ index.php?pg=$1 [L]).
Quant au balises PHP, j'utilise <?php ?>

Chose qui n'a peut etre rien a voir mais qui reste troublant: je trouve que internet rame depuis aujourd'hui.

php.ini:

Code:

---

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261

[PHP] ;;;;;;;;;;; ; WARNING ; ;;;;;;;;;;; ; This is the default settings file for new PHP installations. ; By default, PHP installs itself with a configuration suitable for ; development purposes, and *NOT* for production purposes. ; For several security-oriented considerations that should be taken ; before going online with your site, please consult php.ini-recommended ; and http://php.net/manual/en/security.php.     ;;;;;;;;;;;;;;;;;;; ; About this file ; ;;;;;;;;;;;;;;;;;;; ; This file controls many aspects of PHP's behavior. In order for PHP to ; read it, it must be named 'php.ini'. PHP looks for it in the current ; working directory, in the path designated by the environment variable ; PHPRC, and in the path that was defined in compile time (in that order). ; Under Windows, the compile-time path is the Windows directory. The ; path in which the php.ini file is looked for can be overridden using ; the -c argument in command line mode. ; ; The syntax of the file is extremely simple. Whitespace and Lines ; beginning with a semicolon are silently ignored (as you probably guessed). ; Section headers (e.g. [Foo]) are also silently ignored, even though ; they might mean something in the future. ; ; Directives are specified using the following syntax: ; directive = value ; Directive names are *case sensitive* - foo=bar is different from FOO=bar. ; ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression ; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo"). ; ; Expressions in the INI file are limited to bitwise operators and parentheses: ; | bitwise OR ; & bitwise AND ; ~ bitwise NOT ; ! boolean NOT ; ; Boolean flags can be turned on using the values 1, On, True or Yes. ; They can be turned off using the values 0, Off, False or No. ; ; An empty string can be denoted by simply not writing anything after the equal ; sign, or by using the None keyword: ; ; foo = ; sets foo to an empty string ; foo = none ; sets foo to an empty string ; foo = "none" ; sets foo to the string 'none' ; ; If you use constants in your value, and these constants belong to a ; dynamically loaded extension (either a PHP extension or a Zend extension), ; you may only use these constants *after* the line that loads the extension. ; ; All the values in the php.ini-dist file correspond to the builtin ; defaults (that is, if no php.ini is used, or if you delete these lines, ; the builtin defaults will be identical).     ;;;;;;;;;;;;;;;;;;;; ; Language Options ; ;;;;;;;;;;;;;;;;;;;;   ; Enable the PHP scripting language engine under Apache. engine = On   ; Enable compatibility mode with Zend Engine 1 (PHP 4.x) zend.ze1_compatibility_mode = Off   ; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized. ; NOTE: Using short tags should be avoided when developing applications or ; libraries that are meant for redistribution, or deployment on PHP ; servers which are not under your control, because short tags may not ; be supported on the target server. For portable, redistributable code, ; be sure not to use short tags. short_open_tag = Off   ; Allow ASP-style <% %> tags. asp_tags = Off   ; The number of significant digits displayed in floating point numbers. precision = 12   ; Enforce year 2000 compliance (will cause problems with non-compliant browsers) y2k_compliance = On   ; Output buffering allows you to send header lines (including cookies) even ; after you send body content, at the price of slowing PHP's output layer a ; bit. You can enable output buffering during runtime by calling the output ; buffering functions. You can also enable output buffering for all files by ; setting this directive to On. If you wish to limit the size of the buffer ; to a certain size - you can use a maximum number of bytes instead of 'On', as ; a value for this directive (e.g., output_buffering=4096). output_buffering = Off   ; You can redirect all of the output of your scripts to a function. For ; example, if you set output_handler to "mb_output_handler", character ; encoding will be transparently converted to the specified encoding. ; Setting any output handler automatically turns on output buffering. ; Note: People who wrote portable scripts should not depend on this ini ; directive. Instead, explicitly set the output handler using ob_start(). ; Using this ini directive may cause problems unless you know what script ; is doing. ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler" ; and you cannot use both "ob_gzhandler" and "zlib.output_compression". ;output_handler =   ; Transparent output compression using the zlib library ; Valid values for this option are 'off', 'on', or a specific buffer size ; to be used for compression (default is 4KB) ; Note: Resulting chunk size may vary due to nature of compression. PHP ; outputs chunks that are few hundreds bytes each as a result of ; compression. If you prefer a larger chunk size for better ; performance, enable output_buffering in addition. ; Note: You need to use zlib.output_handler instead of the standard ; output_handler, or otherwise the output will be corrupted. zlib.output_compression = Off   ; You cannot specify additional output handlers if zlib.output_compression ; is activated here. This setting does the same as output_handler but in ; a different order. ;zlib.output_handler =   ; Implicit flush tells PHP to tell the output layer to flush itself ; automatically after every output block. This is equivalent to calling the ; PHP function flush() after each and every call to print() or echo() and each ; and every HTML block. Turning this option on has serious performance ; implications and is generally recommended for debugging purposes only. implicit_flush = Off   ; The unserialize callback function will called (with the undefind class' ; name as parameter), if the unserializer finds an undefined class ; which should be instanciated. ; A warning appears if the specified function is not defined, or if the ; function doesn't include/implement the missing class. ; So only set this entry, if you really want to implement such a ; callback-function. unserialize_callback_func=   ; When floats & doubles are serialized store serialize_precision significant ; digits after the floating point. The default value ensures that when floats ; are decoded with unserialize, the data will remain the same. serialize_precision = 100   ; Whether to enable the ability to force arguments to be passed by reference ; at function call time. This method is deprecated and is likely to be ; unsupported in future versions of PHP/Zend. The encouraged method of ; specifying which arguments should be passed by reference is in the function ; declaration. You're encouraged to try and turn this option Off and make ; sure your scripts work properly with it in order to ensure they will work ; with future versions of the language (you will receive a warning each time ; you use this feature, and the argument will be passed by value instead of by ; reference). allow_call_time_pass_reference = On   ; Safe Mode ; safe_mode = Off   ; By default, Safe Mode does a UID compare check when ; opening files. If you want to relax this to a GID compare, ; then turn on safe_mode_gid. safe_mode_gid = Off   ; When safe_mode is on, UID/GID checks are bypassed when ; including files from this directory and its subdirectories. ; (directory must also be in include_path or full path must ; be used when including) safe_mode_include_dir =   ; When safe_mode is on, only executables located in the safe_mode_exec_dir ; will be allowed to be executed via the exec family of functions. safe_mode_exec_dir =   ; Setting certain environment variables may be a potential security breach. ; This directive contains a comma-delimited list of prefixes. In Safe Mode, ; the user may only alter environment variables whose names begin with the ; prefixes supplied here. By default, users will only be able to set ; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR). ; ; Note: If this directive is empty, PHP will let the user modify ANY ; environment variable! safe_mode_allowed_env_vars = PHP_   ; This directive contains a comma-delimited list of environment variables that ; the end user won't be able to change using putenv(). These variables will be ; protected even if safe_mode_allowed_env_vars is set to allow to change them. safe_mode_protected_env_vars = LD_LIBRARY_PATH   ; open_basedir, if set, limits all file operations to the defined directory ; and below. This directive makes most sense if used in a per-directory ; or per-virtualhost web server configuration file. This directive is ; *NOT* affected by whether Safe Mode is turned On or Off. ;open_basedir =   ; This directive allows you to disable certain functions for security reasons. ; It receives a comma-delimited list of function names. This directive is ; *NOT* affected by whether Safe Mode is turned On or Off. disable_functions =   ; This directive allows you to disable certain classes for security reasons. ; It receives a comma-delimited list of class names. This directive is ; *NOT* affected by whether Safe Mode is turned On or Off. disable_classes =   ; Colors for Syntax Highlighting mode. Anything that's acceptable in ; <font color="??????"> would work. ;highlight.string = #DD0000 ;highlight.comment = #FF9900 ;highlight.keyword = #007700 ;highlight.bg = #FFFFFF ;highlight.default = #0000BB ;highlight.html = #000000     ; ; Misc ; ; Decides whether PHP may expose the fact that it is installed on the server ; (e.g. by adding its signature to the Web server header). It is no security ; threat in any way, but it makes it possible to determine whether you use PHP ; on your server or not. expose_php = On     ;;;;;;;;;;;;;;;;;;; ; Resource Limits ; ;;;;;;;;;;;;;;;;;;;   max_execution_time = 30 ; Maximum execution time of each script, in seconds max_input_time = 60 ; Maximum amount of time each script may spend parsing request data memory_limit = 128M ; Maximum amount of memory a script may consume (8MB)   ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; Error handling and logging ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;   ; error_reporting is a bit-field. Or each number up to get desired error ; reporting level ; E_ALL - All errors and warnings ; E_ERROR - fatal run-time errors ; E_WARNING - run-time warnings (non-fatal errors) ; E_PARSE - compile-time parse errors ; E_NOTICE - run-time notices (these are warnings which often result ; from a bug in your code, but it's possible that it was ; intentional (e.g., using an uninitialized variable and ; relying on the fact it's automatically initialized to an ; empty string) ; E_STRICT - run-time notices, enable to have PHP suggest changes ; to your code which will ensure the best interoperability ; and forward compatability of your code ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's ; initial startup ; E_COMPILE_ERROR - fatal compile-time errors ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors) ; E_USER_ERROR - user-generated error message ; E_USER_WARNING - user-generated warning message ; E_USER_NOTICE - user-generated notice message ; ; Examples: ; ; - Show all errors, except for notices ; ;error_reporting = E_ALL & ~E_NOTICE ; ; - Show only errors ; ;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR ; ; - Show all errors except for notices and coding standards warnings ; error_reporting = E_ALL & ~E_NOTICE & ~E_STRICT   ; Print out errors (as a part of the output). For production web sites, ; you're strongly encouraged to turn this feature off, and use error logging ; instead (see below). Keeping display_errors enabled on a production web site ; may reveal security information to end users, such as file paths on your Web ; server, your database schema or other information. display_errors = On   ; Even when display_errors is on, errors that occur during PHP's startup ; sequence are not displayed. It's strongly recommended to keep ; display_startup_errors off, except for when debugging. display_startup_errors = Off   ; Log errors into a log file (server-specific log, stderr, or error_log (below)) ; As stated above, you're strongly advised to use error logging in place of ; error displaying on production web sites. log_errors = On   ; Set maximum length of log_errors. In error_log information about the source is ; added. The default is 1024 and 0 allows to not apply any maximum length at all. log_errors_max_len = 1024   ; Do not log repeated messages. Repeated errors must occur in same file on same ; line until ignore_repeated_source is set true. ignore_repeated_errors = Off   ; Ignore source of message when ignoring repeated messages. When this setting ; is On you will not log errors with repeated messages from different files or ; sourcelines. ignore_repeated_source = Off   ; If this parameter is set to Off, then memory leaks will not be shown (on ; stdout or in the log). This has only effect in a debug compile, and if ; error reporting includes E_WARNING in the allowed list report_memleaks = On   ; Store the last error/warning message in $php_errormsg (boolean). track_errors = Off   ; Disable the inclusion of HTML tags in error messages. ; Note: Never use this feature for production boxes. ;html_errors = Off   ; If html_errors is set On PHP produces clickable error messages that direct ; to a page describing the error or function causing the error in detail. ; You can download a copy of the PHP manual from http://www.php.net/docs.php ; and change docref_root to the base URL of your local copy including the ; leading '/'. You must also specify the file extension being used including ; the dot. ; Note: Never use this feature for production boxes. ;docref_root = "/phpmanual/" ;docref_ext = .html   ; String to output before an error message. ;error_prepend_string = "<font color=ff0000>"   ; String to output after an error message. ;error_append_string = "</font>"   ; Log errors to specified file. error_log = D:/wamp/logs/php_error.log   ; Log errors to syslog (Event Log on NT, not valid in Windows 95). ;error_log = syslog     ;;;;;;;;;;;;;;;;; ; Data Handling ; ;;;;;;;;;;;;;;;;; ; ; Note - track_vars is ALWAYS enabled as of PHP 4.0.3   ; The separator used in PHP generated URLs to separate arguments. ; Default is "&". ;arg_separator.output = "&amp;"   ; List of separator(s) used by PHP to parse input URLs into variables. ; Default is "&". ; NOTE: Every character in this directive is considered as separator! ;arg_separator.input = ";&"   ; This directive describes the order in which PHP registers GET, POST, Cookie, ; Environment and Built-in variables (G, P, C, E & S respectively, often ; referred to as EGPCS or GPC). Registration is done from left to right, newer ; values override older values. variables_order = "EGPCS"   ; Whether or not to register the EGPCS variables as global variables. You may ; want to turn this off if you don't want to clutter your scripts' global scope ; with user data. This makes most sense when coupled with track_vars - in which ; case you can access all of the GPC variables through the $HTTP_*_VARS[], ; variables. ; ; You should do your best to write your scripts so that they do not require ; register_globals to be on; Using form variables as globals can easily lead ; to possible security problems, if the code is not very well thought of. register_globals = Off   ; Whether or not to register the old-style input arrays, HTTP_GET_VARS ; and friends. If you're not using them, it's recommended to turn them off, ; for performance reasons. register_long_arrays = On   ; This directive tells PHP whether to declare the argv&argc variables (that ; would contain the GET information). If you don't use these variables, you ; should turn it off for increased performance. register_argc_argv = On   ; Maximum size of POST data that PHP will accept. post_max_size = 8M   ; Magic quotes ;   ; Magic quotes for incoming GET/POST/Cookie data. magic_quotes_gpc = On   ; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc. magic_quotes_runtime = Off   ; Use Sybase-style magic quotes (escape ' with '' instead of \'). magic_quotes_sybase = Off   ; Automatically add files before or after any PHP document. auto_prepend_file = auto_append_file =   ; As of 4.0b4, PHP always outputs a character encoding by default in ; the Content-type: header. To disable sending of the charset, simply ; set it to be empty. ; ; PHP's built-in default is text/html default_mimetype = "text/html" ;default_charset = "iso-8859-1"   ; Always populate the $HTTP_RAW_POST_DATA variable. ;always_populate_raw_post_data = On     ;;;;;;;;;;;;;;;;;;;;;;;;; ; Paths and Directories ; ;;;;;;;;;;;;;;;;;;;;;;;;;   ; UNIX: "/path1:/path2" ;include_path = ".:/php/includes" ; ; Windows: "\path1;\path2" ;include_path = ".;c:\php\includes"   ; The root of the PHP pages, used only if nonempty. ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root ; if you are running php as a CGI under any web server (other than IIS) ; see documentation for security issues. The alternate is to use the ; cgi.force_redirect configuration below doc_root =   ; The directory under which PHP opens the script using /~username used only ; if nonempty. user_dir =   ; Directory in which the loadable extensions (modules) reside. extension_dir = "D:/wamp/php/ext/"   ; Whether or not to enable the dl() function. The dl() function does NOT work ; properly in multithreaded servers, such as IIS or Zeus, and is automatically ; disabled on them. enable_dl = On   ; cgi.force_redirect is necessary to provide security running PHP as a CGI under ; most web servers. Left undefined, PHP turns this on by default. You can ; turn it off here AT YOUR OWN RISK ; **You CAN safely turn this off for IIS, in fact, you MUST.** ; cgi.force_redirect = 1   ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with ; every request. ; cgi.nph = 1   ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP ; will look for to know it is OK to continue execution. Setting this variable MAY ; cause security issues, KNOW WHAT YOU ARE DOING FIRST. ; cgi.redirect_status_env = ;   ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate ; security tokens of the calling client. This allows IIS to define the ; security context that the request runs under. mod_fastcgi under Apache ; does not currently support this feature (03/17/2002) ; Set to 1 if running under IIS. Default is zero. ; fastcgi.impersonate = 1;   ; cgi.rfc2616_headers configuration option tells PHP what type of headers to ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that ; is supported by Apache. When this option is set to 1 PHP will send ; RFC2616 compliant header. ; Default is zero. ;cgi.rfc2616_headers = 0     ;;;;;;;;;;;;;;;; ; File Uploads ; ;;;;;;;;;;;;;;;;   ; Whether to allow HTTP file uploads. file_uploads = On   ; Temporary directory for HTTP uploaded files (will use system default if not ; specified). upload_tmp_dir = "D:/wamp/tmp"   ; Maximum allowed size for uploaded files. upload_max_filesize = 2M     ;;;;;;;;;;;;;;;;;; ; Fopen wrappers ; ;;;;;;;;;;;;;;;;;;   ; Whether to allow the treatment of URLs (like http:// or ftp://) as files. allow_url_fopen = On   ; Define the anonymous ftp password (your email address) ;from="john@doe.com"   ; Define the User-Agent string ; user_agent="PHP"   ; Default timeout for socket based streams (seconds) default_socket_timeout = 60   ; If your scripts have to deal with files from Macintosh systems, ; or you are running on a Mac and need to deal with files from ; unix or win32 systems, setting this flag will cause PHP to ; automatically detect the EOL character in those files so that ; fgets() and file() will work regardless of the source of the file. ; auto_detect_line_endings = Off     ;;;;;;;;;;;;;;;;;;;;;; ; Dynamic Extensions ; ;;;;;;;;;;;;;;;;;;;;;; ; ; If you wish to have an extension loaded automatically, use the following ; syntax: ; ; extension=modulename.extension ; ; For example, on Windows: ; ; extension=msql.dll ; ; ... or under UNIX: ; ; extension=msql.so ; ; Note that it should be the name of the module only; no directory information ; needs to go here. Specify the location of the extension with the ; extension_dir directive above.     ;Windows Extensions ;Note that ODBC support is built in, so no dll is needed for it. ; extension=php_mbstring.dll ;extension=php_bz2.dll ;extension=php_cpdf.dll ;extension=php_curl.dll ;extension=php_dba.dll ;extension=php_dbase.dll ;extension=php_dbx.dll ;extension=php_exif.dll ;extension=php_fdf.dll ;extension=php_filepro.dll extension=php_gd2.dll ;extension=php_gettext.dll ;extension=php_ifx.dll ;extension=php_imap.dll ;extension=php_interbase.dll ;extension=php_ldap.dll ;extension=php_mcrypt.dll ;extension=php_mhash.dll ;extension=php_mime_magic.dll ;extension=php_ming.dll ;extension=php_mssql.dll ;extension=php_msql.dll extension=php_mysql.dll extension=php_mysqli.dll ;extension=php_oci8.dll ;extension=php_openssl.dll ;extension=php_oracle.dll ;extension=php_pdf.dll ;extension=php_pgsql.dll ;extension=php_shmop.dll ;extension=php_snmp.dll ;extension=php_sockets.dll ;extension=php_sybase_ct.dll ;extension=php_tidy.dll ;extension=php_xsl.dll ;extension=php_zip.dll extension=php_pdo.dll extension=php_pdo_sqlite.dll ;extension=php_pdo_firebird.dll ;extension=php_pdo_mssql.dll ;extension=php_pdo_mysql.dll ;extension=php_pdo_oci.dll ;extension=php_pdo_ibm.dll :extension=php_pdo_informix.dll ;extension=php_pdo_oci8.dll ;extension=php_pdo_odbc.dll ;extension=php_pdo_pgsql.dll extension=php_sqlite.dll ;extension=php_pdo_sqlite_external.dll ;extension=php_apc.dll ;extension=php_apd.dll ;extension=php_bcompiler.dll ;extension=php_bitset.dll ;extension=php_blenc.dll ;extension=php_bz2_filter.dll ;extension=php_classkit.dll ;extension=php_crack.dll ;extension=php_cvsclient.dll ;extension=php_db.dll ;extension=php_dio.dll ;extension=php_docblock.dll ;extension=php_domxml.dll ;extension=php_event.dll ;extension=php_ffi.dll ;extension=php_fileinfo.dll ;extension=php_fribidi.dll ;extension=php_gmp.dll ;extension=php_gopher.dll ;extension=php_haru.dll ;extension=php_htscanner.dll ;extension=php_hyperwave.dll ;extension=php_ibm_db2.dll ;extension=php_id3.dll ;extension=php_imagick.dll ;extension=php_ingres.dll ;extension=php_java.dll ;extension=php_lzf.dll ;extension=php_mailparse.dll ;extension=php_maxdb.dll ;extension=php_mcrypt_filter.dll ;extension=php_netools.dll ;extension=php_ntuser.dll ;extension=php_oggvorbis.dll ;extension=php_operator.dll ;extension=php_parsekit.dll ;extension=php_phar.dll ;extension=php_phpdoc.dll ;extension=php_pop3.dll ;extension=php_printer.dll ;extension=php_pspell.dll ;extension=php_radius.dll ;extension=php_rar.dll ;extension=php_runkit.dll ;extension=php_sam.dll ;extension=php_sdo.dll ;extension=php_smtp.dll ;extension=php_soap.dll ;extension=php_ssh2.dll ;extension=php_stats.dll ;extension=php_stem.dll ;extension=php_svn.dll ;extension=php_swish.dll ;extension=php_threads.dll ;extension=php_timezonedb.dll ;extension=php_translit.dll ;extension=php_uploadprogress.dll ;extension=php_win32ps.dll ;extension=php_win32scheduler.dll ;extension=php_win32service.dll ;extension=php_yaz.dll ;extension=php_zlib_filter.dll     ;;;;;;;;;;;;;;;;;;; ; Module Settings ; ;;;;;;;;;;;;;;;;;;;   [Syslog] ; Whether or not to define the various syslog variables (e.g. $LOG_PID, ; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In ; runtime, you can define these variables by calling define_syslog_variables(). define_syslog_variables = Off   [mail function] ; For Win32 only. SMTP = localhost   ; For Win32 only. sendmail_from = you@yourdomain   ; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). ;sendmail_path =   ; Force the addition of the specified parameters to be passed as extra parameters ; to the sendmail binary. These parameters will always replace the value of ; the 5th parameter to mail(), even in safe mode. ;mail.force_extra_paramaters =   [SQL] sql.safe_mode = Off   [ODBC] ;odbc.default_db = Not yet implemented ;odbc.default_user = Not yet implemented ;odbc.default_pw = Not yet implemented   ; Allow or prevent persistent links. odbc.allow_persistent = On   ; Check that a connection is still valid before reuse. odbc.check_persistent = On   ; Maximum number of persistent links. -1 means no limit. odbc.max_persistent = -1   ; Maximum number of links (persistent + non-persistent). -1 means no limit. odbc.max_links = -1   ; Handling of LONG fields. Returns number of bytes to variables. 0 means ; passthru. odbc.defaultlrl = 4096   ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char. ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation ; of uodbc.defaultlrl and uodbc.defaultbinmode odbc.defaultbinmode = 1   [MySQL] ; Allow or prevent persistent links. mysql.allow_persistent = On   ; Maximum number of persistent links. -1 means no limit. mysql.max_persistent = -1   ; Maximum number of links (persistent + non-persistent). -1 means no limit. mysql.max_links = -1   ; Default port number for mysql_connect(). If unset, mysql_connect() will use ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look ; at MYSQL_PORT. mysql.default_port =   ; Default socket name for local MySQL connects. If empty, uses the built-in ; MySQL defaults. mysql.default_socket =   ; Default host for mysql_connect() (doesn't apply in safe mode). mysql.default_host =   ; Default user for mysql_connect() (doesn't apply in safe mode). mysql.default_user =   ; Default password for mysql_connect() (doesn't apply in safe mode). ; Note that this is generally a *bad* idea to store passwords in this file. ; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password") ; and reveal this password! And of course, any users with read access to this ; file will be able to reveal the password as well. mysql.default_password =   ; Maximum time (in secondes) for connect timeout. -1 means no limimt mysql.connect_timeout = 60   ; Trace mode. When trace_mode is active (=On), warnings for table/index scans and ; SQL-Erros will be displayed. mysql.trace_mode = Off   [MySQLI]   ; Maximum number of links. -1 means no limit. mysqli.max_links = -1   ; Default port number for mysqli_connect(). If unset, mysqli_connect() will use ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look ; at MYSQL_PORT. mysqli.default_port = 3306   ; Default socket name for local MySQL connects. If empty, uses the built-in ; MySQL defaults. mysqli.default_socket =   ; Default host for mysql_connect() (doesn't apply in safe mode). mysqli.default_host =   ; Default user for mysql_connect() (doesn't apply in safe mode). mysqli.default_user =   ; Default password for mysqli_connect() (doesn't apply in safe mode). ; Note that this is generally a *bad* idea to store passwords in this file. ; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_password") ; and reveal this password! And of course, any users with read access to this ; file will be able to reveal the password as well. mysqli.default_password =   ; Allow or prevent reconnect mysqli.reconnect = Off   [mSQL] ; Allow or prevent persistent links. msql.allow_persistent = On   ; Maximum number of persistent links. -1 means no limit. msql.max_persistent = -1   ; Maximum number of links (persistent+non persistent). -1 means no limit. msql.max_links = -1   [PostgresSQL] ; Allow or prevent persistent links. pgsql.allow_persistent = On   ; Detect broken persistent links always with pg_pconnect(). Need a little overhead. pgsql.auto_reset_persistent = Off   ; Maximum number of persistent links. -1 means no limit. pgsql.max_persistent = -1   ; Maximum number of links (persistent+non persistent). -1 means no limit. pgsql.max_links = -1   ; Ignore PostgreSQL backends Notice message or not. pgsql.ignore_notice = 0   ; Log PostgreSQL backends Noitce message or not. ; Unless pgsql.ignore_notice=0, module cannot log notice message. pgsql.log_notice = 0   [Sybase] ; Allow or prevent persistent links. sybase.allow_persistent = On   ; Maximum number of persistent links. -1 means no limit. sybase.max_persistent = -1   ; Maximum number of links (persistent + non-persistent). -1 means no limit. sybase.max_links = -1   ;sybase.interface_file = "/usr/sybase/interfaces"   ; Minimum error severity to display. sybase.min_error_severity = 10   ; Minimum message severity to display. sybase.min_message_severity = 10   ; Compatability mode with old versions of PHP 3.0. ; If on, this will cause PHP to automatically assign types to results according ; to their Sybase type, instead of treating them all as strings. This ; compatability mode will probably not stay around forever, so try applying ; whatever necessary changes to your code, and turn it off. sybase.compatability_mode = Off   [Sybase-CT] ; Allow or prevent persistent links. sybct.allow_persistent = On   ; Maximum number of persistent links. -1 means no limit. sybct.max_persistent = -1   ; Maximum number of links (persistent + non-persistent). -1 means no limit. sybct.max_links = -1   ; Minimum server message severity to display. sybct.min_server_severity = 10   ; Minimum client message severity to display. sybct.min_client_severity = 10   [dbx] ; returned column names can be converted for compatibility reasons ; possible values for dbx.colnames_case are ; "unchanged" (default, if not set) ; "lowercase" ; "uppercase" ; the recommended default is either upper- or lowercase, but ; unchanged is currently set for backwards compatibility dbx.colnames_case = "unchanged"   [bcmath] ; Number of decimal digits for all bcmath functions. bcmath.scale = 0   [browscap] ;browscap = extra/browscap.ini   [Informix] ; Default host for ifx_connect() (doesn't apply in safe mode). ifx.default_host =   ; Default user for ifx_connect() (doesn't apply in safe mode). ifx.default_user =   ; Default password for ifx_connect() (doesn't apply in safe mode). ifx.default_password =   ; Allow or prevent persistent links. ifx.allow_persistent = On   ; Maximum number of persistent links. -1 means no limit. ifx.max_persistent = -1   ; Maximum number of links (persistent + non-persistent). -1 means no limit. ifx.max_links = -1   ; If on, select statements return the contents of a text blob instead of its id. ifx.textasvarchar = 0   ; If on, select statements return the contents of a byte blob instead of its id. ifx.byteasvarchar = 0   ; Trailing blanks are stripped from fixed-length char columns. May help the ; life of Informix SE users. ifx.charasvarchar = 0   ; If on, the contents of text and byte blobs are dumped to a file instead of ; keeping them in memory. ifx.blobinfile = 0   ; NULL's are returned as empty strings, unless this is set to 1. In that case, ; NULL's are returned as string 'NULL'. ifx.nullformat = 0   [Session] ; Handler used to store/retrieve data. session.save_handler = files   ; Argument passed to save_handler. In the case of files, this is the path ; where data files are stored. Note: Windows users have to change this ; variable in order to use PHP's session functions. ; ; As of PHP 4.0.1, you can define the path as: ; ; session.save_path = "N;/path" ; ; where N is an integer. Instead of storing all the session files in ; /path, what this will do is use subdirectories N-levels deep, and ; store the session data in those directories. This is useful if you ; or your OS have problems with lots of files in one directory, and is ; a more efficient layout for servers that handle lots of sessions. ; ; NOTE 1: PHP will not create this directory structure automatically. ; You can use the script in the ext/session dir for that purpose. ; NOTE 2: See the section on garbage collection below if you choose to ; use subdirectories for session storage ; ; The file storage module creates files using mode 600 by default. ; You can change that by using ; ; session.save_path = "N;MODE;/path" ; ; where MODE is the octal representation of the mode. Note that this ; does not overwrite the process's umask. session.save_path = "D:/wamp/tmp"   ; Whether to use cookies. session.use_cookies = 1   ; This option enables administrators to make their users invulnerable to ; attacks which involve passing session ids in URLs; defaults to 0. ; session.use_only_cookies = 1   ; Name of the session (used as cookie name). session.name = PHPSESSID   ; Initialize session on request startup. session.auto_start = 0   ; Lifetime in seconds of cookie or, if 0, until browser is restarted. session.cookie_lifetime = 0   ; The path for which the cookie is valid. session.cookie_path = /   ; The domain for which the cookie is valid. session.cookie_domain =   ; Handler used to serialize data. php is the standard serializer of PHP. session.serialize_handler = php   ; Define the probability that the 'garbage collection' process is started ; on every session initialization. ; The probability is calculated by using gc_probability/gc_divisor, ; e.g. 1/100 means there is a 1% chance that the GC process starts ; on each request.   session.gc_probability = 1 session.gc_divisor = 100   ; After this number of seconds, stored data will be seen as 'garbage' and ; cleaned up by the garbage collection process. session.gc_maxlifetime = 1440   ; NOTE: If you are using the subdirectory option for storing session files ; (see session.save_path above), then garbage collection does *not* ; happen automatically. You will need to do your own garbage ; collection through a shell script, cron entry, or some other method. ; For example, the following script would is the equivalent of ; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes): ; cd /path/to/sessions; find -cmin +24 | xargs rm   ; PHP 4.2 and less have an undocumented feature/bug that allows you to ; to initialize a session variable in the global scope, albeit register_globals ; is disabled. PHP 4.3 and later will warn you, if this feature is used. ; You can disable the feature and the warning seperately. At this time, ; the warning is only displayed, if bug_compat_42 is enabled.   session.bug_compat_42 = 1 session.bug_compat_warn = 1   ; Check HTTP Referer to invalidate externally stored URLs containing ids. ; HTTP_REFERER has to contain this substring for the session to be ; considered as valid. session.referer_check =   ; How many bytes to read from the file. session.entropy_length = 0   ; Specified here to create the session id. session.entropy_file =   ;session.entropy_length = 16   ;session.entropy_file = /dev/urandom   ; Set to {nocache,private,public,} to determine HTTP caching aspects ; or leave this empty to avoid sending anti-caching headers. session.cache_limiter = nocache   ; Document expires after n minutes. session.cache_expire = 180   ; trans sid support is disabled by default. ; Use of trans sid may risk your users security. ; Use this option with caution. ; - User may send URL contains active session ID ; to other person via. email/irc/etc. ; - URL that contains active session ID may be stored ; in publically accessible computer. ; - User may access your site with the same session ID ; always using URL stored in browser's history or bookmarks. session.use_trans_sid = 0   ; Select a hash function ; 0: MD5 (128 bits) ; 1: SHA-1 (160 bits) session.hash_function = 0   ; Define how many bits are stored in each character when converting ; the binary hash data to something readable. ; ; 4 bits: 0-9, a-f ; 5 bits: 0-9, a-v ; 6 bits: 0-9, a-z, A-Z, "-", "," session.hash_bits_per_character = 4   ; The URL rewriter will look for URLs in a defined set of HTML tags. ; form/fieldset are special; if you include them here, the rewriter will ; add a hidden <input> field with the info which is otherwise appended ; to URLs. If you want XHTML conformity, remove the form entry. ; Note that all valid entries require a "=", even if no value follows. url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=,fieldset="   [MSSQL] ; Allow or prevent persistent links. mssql.allow_persistent = On   ; Maximum number of persistent links. -1 means no limit. mssql.max_persistent = -1   ; Maximum number of links (persistent+non persistent). -1 means no limit. mssql.max_links = -1   ; Minimum error severity to display. mssql.min_error_severity = 10   ; Minimum message severity to display. mssql.min_message_severity = 10   ; Compatability mode with old versions of PHP 3.0. mssql.compatability_mode = Off   ; Connect timeout ;mssql.connect_timeout = 5   ; Query timeout ;mssql.timeout = 60   ; Valid range 0 - 2147483647. Default = 4096. ;mssql.textlimit = 4096   ; Valid range 0 - 2147483647. Default = 4096. ;mssql.textsize = 4096   ; Limits the number of records in each batch. 0 = all records in one batch. ;mssql.batchsize = 0   ; Specify how datetime and datetim4 columns are returned ; On => Returns data converted to SQL server settings ; Off => Returns values as YYYY-MM-DD hh:mm:ss ;mssql.datetimeconvert = On   ; Use NT authentication when connecting to the server mssql.secure_connection = Off   ; Specify max number of processes. Default = 25 ;mssql.max_procs = 25   [Assertion] ; Assert(expr); active by default. ;assert.active = On   ; Issue a PHP warning for each failed assertion. ;assert.warning = On   ; Don't bail out by default. ;assert.bail = Off   ; User-function to be called if an assertion fails. ;assert.callback = 0   ; Eval the expression with current error_reporting(). Set to true if you want ; error_reporting(0) around the eval(). ;assert.quiet_eval = 0   [Ingres II] ; Allow or prevent persistent links. ingres.allow_persistent = On   ; Maximum number of persistent links. -1 means no limit. ingres.max_persistent = -1   ; Maximum number of links, including persistents. -1 means no limit. ingres.max_links = -1   ; Default database (format: [node_id::]dbname[/srv_class]). ingres.default_database =   ; Default user. ingres.default_user =   ; Default password. ingres.default_password =   [Verisign Payflow Pro] ; Default Payflow Pro server. pfpro.defaulthost = "test-payflow.verisign.com"   ; Default port to connect to. pfpro.defaultport = 443   ; Default timeout in seconds. pfpro.defaulttimeout = 30   ; Default proxy IP address (if required). ;pfpro.proxyaddress =   ; Default proxy port. ;pfpro.proxyport =   ; Default proxy logon. ;pfpro.proxylogon =   ; Default proxy password. ;pfpro.proxypassword =   [Sockets] ; Use the system read() function instead of the php_read() wrapper. sockets.use_system_read = On   [com] ; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs ;com.typelib_file = ; allow Distributed-COM calls ;com.allow_dcom = true ; autoregister constants of a components typlib on com_load() ;com.autoregister_typelib = true ; register constants casesensitive ;com.autoregister_casesensitive = false ; show warnings on duplicate constat registrations ;com.autoregister_verbose = true   [mbstring] ; language for internal character representation. ;mbstring.language = Japanese   ; internal/script encoding. ; Some encoding cannot work as internal encoding. ; (e.g. SJIS, BIG5, ISO-2022-*) ;mbstring.internal_encoding = EUC-JP   ; http input encoding. ;mbstring.http_input = auto   ; http output encoding. mb_output_handler must be ; registered as output buffer to function ;mbstring.http_output = SJIS   ; enable automatic encoding translation accoding to ; mbstring.internal_encoding setting. Input chars are ; converted to internal encoding by setting this to On. ; Note: Do _not_ use automatic encoding translation for ; portable libs/applications. ;mbstring.encoding_translation = Off   ; automatic encoding detection order. ; auto means ;mbstring.detect_order = auto   ; substitute_character used when character cannot be converted ; one from another ;mbstring.substitute_character = none;   ; overload(replace) single byte functions by mbstring functions. ; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(), ; etc. Possible values are 0,1,2,4 or combination of them. ; For example, 7 for overload everything. ; 0: No overload ; 1: Overload mail() function ; 2: Overload str*() functions ; 4: Overload ereg*() functions ;mbstring.func_overload = 0   [FrontBase] ;fbsql.allow_persistent = On ;fbsql.autocommit = On ;fbsql.default_database = ;fbsql.default_database_password = ;fbsql.default_host = ;fbsql.default_password = ;fbsql.default_user = "_SYSTEM" ;fbsql.generate_warnings = Off ;fbsql.max_connections = 128 ;fbsql.max_links = 128 ;fbsql.max_persistent = -1 ;fbsql.max_results = 128 ;fbsql.batchSize = 1000   [exif] ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS. ; With mbstring support this will automatically be converted into the encoding ; given by corresponding encode setting. When empty mbstring.internal_encoding ; is used. For the decode settings you can distinguish between motorola and ; intel byte order. A decode setting cannot be empty. ;exif.encode_unicode = ISO-8859-15 ;exif.decode_unicode_motorola = UCS-2BE ;exif.decode_unicode_intel = UCS-2LE ;exif.encode_jis = ;exif.decode_jis_motorola = JIS ;exif.decode_jis_intel = JIS   [Tidy] ; The path to a default tidy configuration file to use when using tidy ;tidy.default_config = /usr/local/lib/php/default.tcfg   ; Should tidy clean and repair output automatically? ; WARNING: Do not use this option if you are generating non-html content ; such as dynamic images tidy.clean_output = Off   ; Local Variables: ; tab-width: 4 ; End:   [eaccelerator] ;eaccelerator.shm_size = "64" eaccelerator.cache_dir = "D:/wamp/tmp/eaccelerator" ;eaccelerator.enable = "1" ;eaccelerator.optimizer = "1" ;eaccelerator.debug = "0" ;eaccelerator.check_mtime = "1" ;eaccelerator.filter = "" ;eaccelerator.shm_max = "0" ;eaccelerator.shm_ttl = "0" ;eaccelerator.shm_prune_period = "0" ;eaccelerator.shm_only = "0" ;eaccelerator.compress = "1" ;eaccelerator.compress_level = "9" ;eaccelerator.keys = "shm_and_disk" ;eaccelerator.sessions = "shm_and_disk" ;eaccelerator.content = "shm_and_disk" ;eaccelerator.admin.name="yourusername" ;eaccelerator.admin.password="yourpassword"

---

Citation:

---

Envoyé par _Mac_

Du coup, pas d'autre choix que de nous donner toute ta configuration Apache

---

S'il te plaît :mrgreen:

Tu as le php.ini au dessus. tuas as besoin de quoi d'autre?

httpd.conf :

Code:

---

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492

# # This is the main Apache HTTP server configuration file. It contains the # configuration directives that give the server its instructions. # See <URL:http://httpd.apache.org/docs/2.2/> for detailed information. # In particular, see # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html> # for a discussion of each configuration directive. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "logs/foo.log" # with ServerRoot set to "C:/Program Files/Apache Software Foundation/Apache2.2" will be interpreted by the # server as "C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log". # # NOTE: Where filenames are specified, you must use forward slashes # instead of backslashes (e.g., "c:/apache" instead of "c:\apache"). # If a drive letter is omitted, the drive on which Apache.exe is located # will be used by default. It is recommended that you always supply # an explicit drive letter in absolute paths, however, to avoid # confusion. #   # ThreadsPerChild: constant number of worker threads in the server process # MaxRequestsPerChild: maximum number of requests a server process serves ThreadsPerChild 250 MaxRequestsPerChild 0   # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # Do not add a slash at the end of the directory path. If you point # ServerRoot at a non-local disk, be sure to point the LockFile directive # at a local disk. If you wish to share the same ServerRoot for multiple # httpd daemons, you will need to change at least LockFile and PidFile. # ServerRoot "D:/wamp/apache2"   # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, instead of the default. See also the <VirtualHost> # directive. # # Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses (0.0.0.0) # #Listen 12.34.56.78:80 Listen 80   # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Statically compiled modules (those listed by `httpd -l') do not need # to be loaded here. # # Example: # LoadModule foo_module modules/mod_foo.so # LoadModule actions_module modules/mod_actions.so LoadModule alias_module modules/mod_alias.so LoadModule asis_module modules/mod_asis.so LoadModule auth_basic_module modules/mod_auth_basic.so #LoadModule auth_digest_module modules/mod_auth_digest.so #LoadModule authn_anon_module modules/mod_authn_anon.so #LoadModule authn_dbm_module modules/mod_authn_dbm.so LoadModule authn_default_module modules/mod_authn_default.so LoadModule authn_file_module modules/mod_authn_file.so #LoadModule authz_dbm_module modules/mod_authz_dbm.so LoadModule authz_default_module modules/mod_authz_default.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_host_module modules/mod_authz_host.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule cern_meta_module modules/mod_cern_meta.so LoadModule cgi_module modules/mod_cgi.so #LoadModule dav_module modules/mod_dav.so #LoadModule dav_fs_module modules/mod_dav_fs.so #LoadModule deflate_module modules/mod_deflate.so LoadModule dir_module modules/mod_dir.so LoadModule env_module modules/mod_env.so #LoadModule expires_module modules/mod_expires.so #LoadModule file_cache_module modules/mod_file_cache.so #LoadModule headers_module modules/mod_headers.so LoadModule imagemap_module modules/mod_imagemap.so LoadModule include_module modules/mod_include.so #LoadModule info_module modules/mod_info.so LoadModule isapi_module modules/mod_isapi.so LoadModule log_config_module modules/mod_log_config.so LoadModule mime_module modules/mod_mime.so #LoadModule mime_magic_module modules/mod_mime_magic.so #LoadModule proxy_module modules/mod_proxy.so #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule proxy_connect_module modules/mod_proxy_connect.so #LoadModule proxy_http_module modules/mod_proxy_http.so #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule rewrite_module modules/mod_rewrite.so LoadModule setenvif_module modules/mod_setenvif.so #LoadModule speling_module modules/mod_speling.so #LoadModule status_module modules/mod_status.so #LoadModule unique_id_module modules/mod_unique_id.so LoadModule userdir_module modules/mod_userdir.so #LoadModule usertrack_module modules/mod_usertrack.so #LoadModule vhost_alias_module modules/mod_vhost_alias.so #LoadModule ssl_module modules/mod_ssl.so LoadModule php5_module "D:/wamp/php/php5apache2_2.dll"   # 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # <VirtualHost> definition. These values also provide defaults for # any <VirtualHost> containers you may define later in the file. # # All of these directives may appear inside <VirtualHost> containers, # in which case these default settings will be overridden for the # virtual host being defined. #   # # ServerAdmin: Your address, where problems with the server should be # e-mailed. This address appears on some server-generated pages, such # as error documents. e.g. <a href="mailto:admin@your-domain.com">admin@your-domain.com</a> # ServerAdmin webmaster@localhost   # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If your host doesn't have a registered DNS name, enter its IP address here. # ServerName localhost:80   # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # DocumentRoot "D:/wamp/www"   # # Each directory to which Apache has access can be configured with respect # to which services and features are allowed and/or disabled in that # directory (and its subdirectories). # # First, we configure the "default" to be a very restrictive set of # features. # <Directory /> Options FollowSymLinks AllowOverride None Order deny,allow Deny from all Satisfy all </Directory>   # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. #   # # This should be changed to whatever you set DocumentRoot to. # <Directory "D:/wamp/www">   # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # <a href="http://httpd.apache.org/docs/2.2/mod/core.html#options" target="_blank">http://httpd.apache.org/docs/2.2/mod/core.html#options</a> # for more information. # Options Indexes FollowSymLinks   # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # AllowOverride all   # # Controls who can get stuff from this server. # # onlineoffline tag - don't remove Order Allow,Deny Allow from all   </Directory>   # # DirectoryIndex: sets the file that Apache will serve if a directory # is requested. # <IfModule dir_module> DirectoryIndex index.php index.php3 index.html index.htm index.html.var </IfModule>   # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <FilesMatch "^\.ht"> Order allow,deny Deny from all </FilesMatch>   # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog ../logs/apache_error.log   # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn   <IfModule log_config_module> # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common   <IfModule logio_module> # You need to enable mod_logio.c to use %I and %O LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule>   # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a <VirtualHost> # container, they will be logged here. Contrariwise, if you *do* # define per-<VirtualHost> access logfiles, transactions will be # logged therein and *not* in this file. # CustomLog ../logs/access.log common   # # If you prefer a logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. # #CustomLog logs/access.log combined </IfModule>   <IfModule alias_module> # # Redirect: Allows you to tell clients about documents that used to # exist in your server's namespace, but do not anymore. The client # will make a new request for the document at its new location. # Example: # Redirect permanent /foo <a href="http://localhost/bar" target="_blank">http://localhost/bar</a>   # # Alias: Maps web paths into filesystem paths and is used to # access content that does not live under the DocumentRoot. # Example: # Alias /webpath /full/filesystem/path # # If you include a trailing / on /webpath then the server will # require it to be present in the URL. You will also likely # need to provide a <Directory> section to allow access to # the filesystem path.   # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the target directory are treated as applications and # run by the server when requested rather than as documents sent to the # client. The same rules about trailing "/" apply to ScriptAlias # directives as to Alias. # ScriptAlias /cgi-bin/ "D:/wamp/Apache2/cgi-bin/"   </IfModule>   # # "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased # CGI directory exists, if you have that configured. # <Directory "D:/wamp/apache2/cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory>   # # Apache parses all CGI scripts for the shebang line by default. # This comment line, the first line of the script, consists of the symbols # pound (#) and exclamation (!) followed by the path of the program that # can execute this specific script. For a perl script, with perl.exe in # the C:\Program Files\Perl directory, the shebang line should be:   #!c:/program files/perl/perl   # Note you _must_not_ indent the actual shebang line, and it must be the # first line of the file. Of course, CGI processing must be enabled by # the appropriate ScriptAlias or Options ExecCGI directives for the files # or directory in question. # # However, Apache on Windows allows either the Unix behavior above, or can # use the Registry to match files by extention. The command to execute # a file of this type is retrieved from the registry by the same method as # the Windows Explorer would use to handle double-clicking on a file. # These script actions can be configured from the Windows Explorer View menu, # 'Folder Options', and reviewing the 'File Types' tab. Clicking the Edit # button allows you to modify the Actions, of which Apache 1.3 attempts to # perform the 'Open' Action, and failing that it will try the shebang line. # This behavior is subject to change in Apache release 2.0. # # Each mechanism has it's own specific security weaknesses, from the means # to run a program you didn't intend the website owner to invoke, and the # best method is a matter of great debate. # # To enable the this Windows specific behavior (and therefore -disable- the # equivilant Unix behavior), uncomment the following directive: # #ScriptInterpreterSource registry # # The directive above can be placed in individual <Directory> blocks or the # .htaccess file, with either the 'registry' (Windows behavior) or 'script' # (Unix behavior) option, and will override this server default option. #   # # DefaultType: the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain   <IfModule mime_module> # # TypesConfig points to the file containing the list of mappings from # filename extension to MIME-type. # TypesConfig conf/mime.types   # # AddType allows you to add to or override the MIME configuration # file specified in TypesConfig for specific file types. # #AddType application/x-gzip .tgz # # AddEncoding allows you to have certain browsers uncompress # information on the fly. Note: Not all browsers support this. # #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz # # If the AddEncoding directives above are commented-out, then you # probably should define those extensions to indicate media types: # AddType application/x-compress .Z AddType application/x-gzip .gz .tgz AddType application/x-httpd-php .php AddType application/x-httpd-php .php3 # # AddHandler allows you to map certain file extensions to "handlers": # actions unrelated to filetype. These can be either built into the server # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add "ExecCGI" to the "Options" directive.) # #AddHandler cgi-script .cgi   # For type maps (negotiated resources): #AddHandler type-map var   # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # #AddType text/html .shtml #AddOutputFilter INCLUDES .shtml </IfModule>   # # The mod_mime_magic module allows the server to use various hints from the # contents of the file itself to determine its type. The MIMEMagicFile # directive tells the module where the hint definitions are located. # #MIMEMagicFile conf/magic   # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 <a href="http://localhost/subscription_info.html" target="_blank">http://localhost/subscription_info.html</a> #   # # EnableMMAP and EnableSendfile: On systems that support it, # memory-mapping or the sendfile syscall is used to deliver # files. This usually improves server performance, but must # be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise # broken on your system. # #EnableMMAP off #EnableSendfile off   # Supplemental configuration # # The configuration files in the conf/extra/ directory can be # included to add extra features or to modify the default configuration of # the server, or you may simply copy their contents here and change as # necessary.   # Server-pool management (MPM specific) #Include conf/extra/httpd-mpm.conf   # Multi-language error messages #Include conf/extra/httpd-multilang-errordoc.conf   # Fancy directory listings #Include conf/extra/httpd-autoindex.conf   # Language settings #Include conf/extra/httpd-languages.conf   # User home directories #Include conf/extra/httpd-userdir.conf   # Real-time info on requests and configuration #Include conf/extra/httpd-info.conf   # Virtual hosts #Include conf/extra/httpd-vhosts.conf   # Local access to the Apache HTTP Server Manual #Include conf/extra/httpd-manual.conf   # Distributed authoring and versioning (WebDAV) #Include conf/extra/httpd-dav.conf   # Various default settings #Include conf/extra/httpd-default.conf   # Secure (SSL/TLS) connections #Include conf/extra/httpd-ssl.conf # # Note: The following must must be present to support # starting without SSL on platforms with no /dev/random equivalent # but a statically compiled-in mod_ssl. # <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin </IfModule>     Include "D:/wamp/apache2/conf/alias/phpmyadmin.conf" Include "D:/wamp/apache2/conf/alias/sqlitemanager.conf"

---

Pense à mettre en forme tes messages avec les boutons # et "bulle" de l'éditeur, ça aide à la lisibilité des messages.

Bref, je ne vois pas du tout ce qui ne va pas. A tout hasard, si tu retires (temporairement) le .htaccess à la racine de ton site, est-ce que PHP fonctionne ? Je ne vois pas de problème de configuration Apache.

Regarde également dans Wamp, dans les Apache modules, si le module mime est activé et si le module PHP est activé.

Citation:

---

Envoyé par _Mac_

Pense à mettre en forme tes messages avec les boutons # et "bulle" de l'éditeur, ça aide à la lisibilité des messages.

---

:oops: désolé.

Citation:

---

Envoyé par _Mac_

Bref, je ne vois pas du tout ce qui ne va pas. A tout hasard, si tu retires (temporairement) le .htaccess à la racine de ton site, est-ce que PHP fonctionne ? Je ne vois pas de problème de configuration Apache.

Regarde également dans Wamp, dans les Apache modules, si le module mime est activé et si le module PHP est activé.

---

Pas mieux.:cry:
je crois que je vais réinstaller Wamp en esperant que le problème sera résolu ! a moins que quelqu'un est une autre idée?

après réinstallation complète: toujours le même probleme !!

:cry:

J'ai trouvé !! enfin... j'ai résolu le problème sans trop savoir comment j'ai fait ! Mais l'essentiel est fait !

Merci d'avoir passé du temps pour m'aider !:ccool: