hello.
petite explication:
j'ai une interface eth1 en dhcp:
je voudrai obtenir 2 interface supplémentaire . je parviens a en obtenir 1 mai pas la deuxième.
je me suis inspirer du tutoriel ici:
http://doc.ubuntu-fr.org/virtualbox_reseau
Fichier : /etc/network/interfaces
après un /etc/init.d/networking restartCitation:
GNU nano 2.0.2 Fichier : /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
#auto lo
#iface lo inet loopback
#new ok
auto eth1
iface eth1 inet manual
auto tap0
iface tap0 inet manual
tunctl_user tnt
auto bridge0
iface bridge0 inet dhcp
post-up chmod ugo+rw /dev/net/tun
bridge-ports eth1 tap0
bridge-ageing 7200
bridge-fd 2
#new
auto tap1
iface tap1 inet manual
tunctl_user tnt
auto bridge1
iface bridge1 inet dhcp
post-up chmod ugo+rw /dev/net/tun
bridge-ports eth1 tap1
bridge-ageing 7200
bridge-fd 2
Citation:
/etc/init.d/networking restart
Reconfiguring network interfaces...There is already a pid file /var/run/dhclient.bridge0.pid with pid 12899
killed old client process, removed PID file
Internet Systems Consortium DHCP Client V3.0.4
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
Listening on LPF/bridge0/00:0a:e4:5e:21:8f
Sending on LPF/bridge0/00:0a:e4:5e:21:8f
Sending on Socket/fallback
DHCPRELEASE on bridge0 to 192.168.1.254 port 67
There is already a pid file /var/run/dhclient.bridge1.pid with pid 13632
killed old client process, removed PID file
Internet Systems Consortium DHCP Client V3.0.4
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
Listening on LPF/bridge1/b6:cb:18:d0:21:2b
Sending on LPF/bridge1/b6:cb:18:d0:21:2b
Sending on Socket/fallback
device eth1 is not a slave of bridge1
Set 'tap0' persistent and owned by uid 1000
Waiting for bridge0 to get ready (MAXWAIT is 6 seconds).
Internet Systems Consortium DHCP Client V3.0.4
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
Listening on LPF/bridge0/00:0a:e4:5e:21:8f
Sending on LPF/bridge0/00:0a:e4:5e:21:8f
Sending on Socket/fallback
DHCPDISCOVER on bridge0 to 255.255.255.255 port 67 interval 3
DHCPOFFER from 192.168.1.254
DHCPREQUEST on bridge0 to 255.255.255.255 port 67
DHCPACK from 192.168.1.254
bound to 192.168.1.65 -- renewal in 40983 seconds.
Set 'tap1' persistent and owned by uid 1000
device eth1 is already a member of a bridge; can't enslave it to bridge bridge1.
Waiting for bridge1 to get ready (MAXWAIT is 6 seconds).
Internet Systems Consortium DHCP Client V3.0.4
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
Listening on LPF/bridge1/b6:cb:18:d0:21:2b
Sending on LPF/bridge1/b6:cb:18:d0:21:2b
Sending on Socket/fallback
DHCPDISCOVER on bridge1 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on bridge1 to 255.255.255.255 port 67 interval 6
DHCPDISCOVER on bridge1 to 255.255.255.255 port 67 interval 8
DHCPDISCOVER on bridge1 to 255.255.255.255 port 67 interval 9
DHCPDISCOVER on bridge1 to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on bridge1 to 255.255.255.255 port 67 interval 13
DHCPDISCOVER on bridge1 to 255.255.255.255 port 67 interval 10
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
done.
On voi bien que bridge0 a reçus une ip et que bridge1 n'en a pas.Citation:
ifconfig
bridge0 Lien encap:Ethernet HWaddr 00:0A:E4:5E:21:8F
inet adr:192.168.1.65 Bcast:192.168.1.255 Masque:255.255.255.0
adr inet6: fe80::20a:e4ff:fe5e:218f/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:128 errors:0 dropped:0 overruns:0 frame:0
TX packets:103 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
RX bytes:8012 (7.8 KiB) TX bytes:18112 (17.6 KiB)
bridge1 Lien encap:Ethernet HWaddr B6:CB:18:D0:21:2B
adr inet6: fe80::b4cb:18ff:fed0:212b/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:30 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
RX bytes:0 (0.0 b) TX bytes:8676 (8.4 KiB)
eth1 Lien encap:Ethernet HWaddr 00:0A:E4:5E:21:8F
adr inet6: fe80::20a:e4ff:fe5e:218f/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2492 errors:0 dropped:0 overruns:0 frame:0
TX packets:2090 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
RX bytes:214420 (209.3 KiB) TX bytes:318929 (311.4 KiB)
Interruption:201 Adresse de base:0x1800
tap0 Lien encap:Ethernet HWaddr 2E:23:A3:A7:AE:34
adr inet6: fe80::2c23:a3ff:fea7:ae34/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:842 overruns:0 carrier:0
collisions:0 lg file transmission:500
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
tap1 Lien encap:Ethernet HWaddr B6:CB:18:D0:21:2B
adr inet6: fe80::b4cb:18ff:fed0:212b/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:99 overruns:0 carrier:0
collisions:0 lg file transmission:500
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Meme en activant
sa ne change rienCitation:
auto lo
iface lo inet loopback
Merci d'avance parce que la je seche, surtout que la configuration réseaux c'est pas ma tasse de thé
