Config Bios et Linux (Debian)
Bonjour,
Je me suis fabriqué un serveur en achetant des pièce sur Alibaba. Un conseil, ne le faites pas, c'est vraiment galère. Pour faire simple, j'ai acheter ceci:
Modèle de carte mère: MACHINIST X99-D8-MAX
processeur: Xeon E5 2696V4
RAM: 32GB * 8 = 256GB DDR4 ECC 2133Mhz (Samsung)
Carte Graphique: Soyo RTX3080Ti.
Le problème que j'ai est que ça démarre, mais j'ai sans cesse des problèmes de Kernel qui change en fonction des paramètres que je change dans le Bios. C'est une vrai galère à Configurer. En plus, la doc est toujours très explicite (doc = Activer/Désactiver tel option). Le problème est de comprendre l'option en question???
Y-a-t-il quelqu'un qui s'y connaisse pour me conseiller dans les paramètres à sélectionner pour arriver à faire fonctionner ce système. Avec les Chinois, ça tourne en boucle et je ne m'en sort pas.
PS: Avec les paramètres par défaut, j'ai: Kernel panic - not syncing: Timeout: Not all CPUs entered broadcast...
Avec certain paramètres, j'ai aussi des messages à propos de CmplTO qui correspond à un PCI Bus Error sur la CPU (8086:6F02) et aussi des messages à propos d'AER TLP Header ... PCI Bus Error toujour sur la CPU.
Voici sous forme de yaml les paramètres du bios:
Code:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
|
Main:
Advenced:
Trusted Computing:
Configuration:
Security Device Support: Enabled #(Default=Enabled)
ACPI Settings:
Enable ACPI Auto Configuration: Disabled #(Default=Disabled)
Enable Hibernation: Disabled #(Default=Enabled)
ACPI Sleep State: Suspend Disabled #(Default=Suspend Disabled)
Lock Legacy Resources: Disabled #(Default=Disabled)
NT5532D SSIO Configuration:
Serial Port 1 Configuration:
Serial Port: Disabled #(Default=Enabled)
# Appear only is "Serial port" is Enable
Change Settings: Auto #(Default=Auto)
Hardware Monitor:
Smart Fan Function:
Realtek PCIe GBE Family Controller (MAC:xx...x1):
Realtek PCIe GBE Family Controller (MAC:xx...x2):
PCI Subsytem Settings:
PCI Latency Timer: 32 PCI Bus Clocks #(Default=32 PCI Bus Clocks)
PCI-X Latency Timer: 64 PCI Bus Clocks #(Default=64 PCI Bus Clocks)
VGA Palette Snoop: Disabled #(Default=Disabled)
PERR# Generation: Disabled #(Default=Disabled)
SERR# Generation: Disabled #(Default=Disabled)
Above 4G Decoding: Disabled #(Default=Disabled)
SR-I0V Support: Enabled #(Default=Disabled)
BME DMA Mittigation: Disabled #(Default=Disabled)
PCI Express Settings:
Relaxed Ordering: Disabled #(Default=Disabled)
Extended Tag: Disabled #(Default=Disabled)
No Snoop: Enabled #(Default=Enabled)
Maximum Payload: Auto #(Default=Auto)
Extended Synch: Disabled #(Default=Disabled)
Link Training Retry: 5 #(Default=5)
Link Training Timeout (us): 1000 #(Default=1000)
Restore PCIE Registers: Disabled #(Default=Disabled)
PCI Express GEN 2 Settings:
PCI Express GEN2 Device Register Settings:
Completion Timeout: Default #(Default=Default)
ARI Forwarding: Enabled #(Default=Disabled)
Atomic0P Requester Enable: Disabled #(default=Disabled)
Atomic0p Egress Blocking: Disabled #(default=Disabled)
ID0 Request Enable: Disabled #(default=Disabled)
ID0 Completion Enable: Disabled #(default=Disabled)
LTR Mechanism Enable: Disabled #(default=Disabled)
End-End TLP Prefix Blocking: Disabled #(default=Disabled)
PCI Express GEN2 Link Register Settings:
Clock Power Management: Disabled #(default=Disabled)
Compliance SOS: Disabled #(default=Disabled)
Hardware Autonomous width: Disabled #(Default=Enabled)
Hardware Autonomous Speed: Disabled #(Default=Enabled)
Network Stack Configuration:
CSM Configuration:
CSM Support: Enabled #(Default=Enabled)
GateA20 Active: Upon Request #(default=Upon Request)
# Option ROM Messages: Disapear if "Video": is set to UEFI
Option ROM Messages: Force BIOS #(Default=Force BIOS)
Boot Option filter: UEFI and Legacy #(Default=UEFI and Legacy)
Network: Do no launch #(Default=Do no launch)
Storage: Legacy #(Default=Legacy)
Video: Legacy #(Default=Legacy)
Other PCI Devices: UEFI #(Default=UEFI)
NVMe Configuration:
USB Configuration:
IntelRCSetup:
Processor Configuration:
Per-Socket Configuration:
CPU Socket 0 Configuration:
Core Enabled: 0 #(Default=0)
IOT Cfg Cbo Bitmap(Hex]: 0 #(Default=0)
CPU Socket 1 Configuration:
Core Enabled: 0 #(Default=0)
IOT Cfg Cbo Bitmap(Hex]: 0 #(Default=0)
Hyper-Threading [All]: Enabled #(Default=Enabled)
Check CPU BIST Result: Enable #(Default=Disabled)
Monitor/Mwait: Enabled #(Default=Enabled)
Execute Disable Bit: Enabled #(Default=Enabled)
Enable Intel TXT Support: Disabled #(default=Disabled)
VMX: Enabled #(Default=Enabled)
Enable SMX: Disabled #(default=Disabled)
Lock Chipset: Enabled #(Default=Enabled)
MSR Lock Control: Enabled #(Default=Enabled)
PPIN Control: Unlock/Enable #(Default=Unlock/Enable)
DEBUG Interface: Disabled #(default=Disabled)
Hardware Prefetcher: Enabled #(Default=Enabled)
Adjacent Cache Prefetch: Enabled #(Default=Enabled)
DCU Streamer Prefetcher: Enabled #(Default=Enabled)
DCU IP Prefetcher: Enabled #(Default=Enabled)
DCU Mode: 32KB 8Way Without ECC #(Default=32KB 8Way Without ECC)
Direct Cache Access: Auto #(Default=Auto)
DCA Prefetch Delay: 32 #(Default=32)
X2APIC: Disabled #(default=Disabled)
AES-NI: Enabled #(Default=Enabled)
Down Stream PECI: Enabled #(Default=Enabled)
II0 LLC Ways [19:0](Hex): 0 #(Default=0)
QLRU Config [63:32](Hex): 0 #(Default=0)
SMM Save State: Disabled #(default=Disabled)
Targeted Smi: Disabled #(default=Disabled)
Advenced Power Management Configuration:
Power Technology: custom #(Default=Custom)
Config TDP: Disabled #(default=Disabled)
IOTG Setting: Disabled #(default=Disabled)
Uncore CLR Freq OVRD: Auto #(Default=Auto)
CPU P State Control:
EIST (P-States): Enabled #(Default=Enabled)
Turbo Mode: Enabled #(Default=Enabled)
P-state coordination: HW_ALL #(Default=HW_ALL)
SPD: Disabled #(default=Disabled)
PL2_SAFETY_NET_ENABLE: Enabled #(Default=Enabled)
Boot performance mode: Max Performace #(Default=Max Performace)
CPU C State Control:
C2C3TT: 0 #(Default=0)
Package C State limit: C0/C1 State #(Default=C6(retention) state)
CPU C3 report: Disabled #(default=Disabled)
CPU C6 report: Enabled #(Default=Enabled)
CPU T State Control:
ACPI T-States: Enabled #(Default=Enabled)
CPU – Advenced PM Tuning:
Energy per BIAS:
Energy Performance Tunning: Enabled #(Default=Enabled)
Power/Performance Switch: Enabled #(Default=Enabled)
Workload Configuration: Balanced #(Default= Balanced)
Averaging Time Window: 23 #(Default=23)
P0 TotalTimeThreshold Low: 35 #(Default=35)
P0 TotalTimeThreshold High: 58 #(Default=58)
SOCKET RAPL Configuration:
FAST_RAPL_NSTRIKE_PL2_DUTY_CYCLE: 64 #(Default=64)
Turbo Pwr Limit Lock: Disabled #(default=Disabled)
Long Pwr Limit Ovrd: Enabled #(Default=Enabled)
Long Dur Pwr Limit: 0 #(Default=0)
Long Dur Time Window: 1 #(Default=1)
Pkg Clmp Lim1: Bellow P1 #(Default=Bellow P1)
Short Dur Pwr Limit En: Enabled #(Default=Enabled)
Short Dur Pwr Limit: 0 #(Default=0)
Pkg Clmp Lim2: Bellow P1 #(Default=Bellow P1)
DRAM RAPL Configuration:
DRAM RAPL Baseline: DRAM RAPL Mode 1 #(Default=DRAM RAPL Mode 1)
Override BW_LIMIT_TF: 1 #(Default=1)
DRAM RAPL Extended Range: Enabled #(Default=Enabled)
Common RefCode Configuration:
MMIOHBase: 56T #(Default=56T)
MMIO High Size: 256G #(Default=256G)
Isoc Mode: Auto #(Default=Auto)
MeSeg Mode: Auto #(Default=Auto)
Numa: Enabled #(Default=Enabled)
QPI Configuration:
QPI General Configuration:
Degrade Precedence: Topology Precedence #(Default=Topology Precedence)
Link Frequency Select: Auto #(Default=Auto)
Link L0p Enable: Enabled #(Default=Enabled)
Link L1 Enable: Enabled #(Default=Enabled)
Legacy VGA Socket: 0 #(Default=0)
MMIO P2P Disable: no #(Default=no)
E2E Parity Enable: Disabled #(default=Disabled)
COD Enable: Auto #(Default=Auto)
Early Snoop: Auto #(Default=Auto)
Home Dir Snoop with IVT- Style OSB: Auto #(Default=Auto)
QPI Debug Print Level: All #(Default=All)
QPI Per Socket Configuration:
CPU 0:
Bus Resources Allocation Ratio: 1 #(Default=1)
IO Resources Allocation Ratio: 1 #(Default=1)
MMIOL Resources Allocation Ratio: 1 #(Default=1)
IIO Disable: no #(Default=no)
CPU 1:
Bus Resources Allocation Ratio: 1 #(Default=1)
IO Resources Allocation Ratio: 1 #(Default=1)
MMIOL Resources Allocation Ratio: 1 #(Default=1)
IIO Disable: no #(Default=no)
CPU 2:
Bus Resources Allocation Ratio: 1 #(Default=1)
IO Resources Allocation Ratio: 1 #(Default=1)
MMIOL Resources Allocation Ratio: 1 #(Default=1)
IIO Disable: no #(Default=no)
CPU 3:
Bus Resources Allocation Ratio: 1 #(Default=1)
IO Resources Allocation Ratio: 1 #(Default=1)
MMIOL Resources Allocation Ratio: 1 #(Default=1)
IIO Disable: no #(Default=no)
Memory Configuration:
II0 Configuration:
PCIe Train by BIOS: yes #(Default=yes)
PCIe Hot Plug: Disabled #(default=Disabled)
PCIe ACPI Hot Plug: Disabled #(default=Disabled)
EV DFX Features: Disabled #(default=Disabled)
IIO0 Configuration:
IOU2 (IIO PCIe Port 1): x4x4 #(Default=x4x4)
IOU0 (IIO PCIe Port 2): Auto #(Default=Auto)
IOU1 (IIO PCIe Port 3): Auto #(Default=Auto)
No PCIe Port active eco: PCU Squelch exit ignore option #(Default=PCU Squelch exit ignore option)
Socket 0 PcieD00F0 – Port 0/DMI:
Link Speed: Auto #(Default=Auto)
Override Max Link Width: Auto #(Default=Auto)
PCI-E Port DeEmphasis: -6.0dB #(Default=-6.0dB)
PCI-E Port L0s Exit Latency: 4us – 8us #(Default=4us – 8us)
PCI-E Port L1 Exit Latency: 8us – 16us #(Default=8us – 16us)
Fatal Err Over: Disabled #(default=Disabled)
Non-Fatal Err Over: Disabled #(default=Disabled)
Corr Err Over: Disabled #(default=Disabled)
L0s Support: Disabled #(default=Disabled)
IIOU0 Non-Posted Prefetch: Disabled #(default=Disabled)
IIOU1 Non-Posted Prefetch: Disabled #(default=Disabled)
IIOU2 Non-Posted Prefetch: Disabled #(default=Disabled)
IIO1 Configuration:
IOU2 (IIO PCIe Port 1): x4x4 #(Default=x4x4)
IOU0 (IIO PCIe Port 2): Auto #(Default=Auto)
IOU1 (IIO PCIe Port 3): Auto #(Default=Auto)
No PCIe Port active eco: PCU Squelch exit ignore option #(Default=PCU Squelch exit ignore option)
IIOU0 Non-Posted Prefetch: Disabled #(default=Disabled)
IIOU1 Non-Posted Prefetch: Disabled #(default=Disabled)
IIOU2 Non-Posted Prefetch: Disabled #(default=Disabled)
IOAT Configuration:
Enable IOAT: Disabled #(default=Disabled)
No Snoop: Disabled #(default=Disabled)
Disable TPH: Enabled #(Default=Enabled)
Relaxed Ordering: Disabled #(default=Disabled)
Apply BDX CBDMA: no #(Default=no)
IIO General Configuration:
IIO IOAPCI (IIO 0): Enabled #(Default=Enabled)
IIO IOAPCI (IIO 1): Enabled #(Default=Enabled)
Intel VT For Directed I/O (VT-d):
Vtd Azalea Vcp Optimizations : Disabled #(default=Disabled)
Intel VT For Directed I/O (VT-d): Enabled #(Default=Enabled)
ACS Control: Enabled #(Default=Enabled)
Interrupt Remapping: Enabled #(Default=Enabled)
Coherency Support (Non-Isoch): Enabled #(Default=Enabled)
Coherency Support (Isoch): Enabled #(Default=Enabled)
TX EQ WA: Enabled #(Default=Enabled)
WA 4167453: Disabled #(default=Disabled)
DMI Vc1 Control: Enabled #(Default=Enabled)
DMI Vcp Control: Enabled #(Default=Enabled)
DMI Vcm Control: Enabled #(Default=Enabled)
VC0 No-Snoop Configuration: Disabled #(default=Disabled)
Gen3 Phase3 loop count: 16 #(Default=16)
Skip Halt On DMI Degradation: Disabled #(default=Disabled)
Power down unused port: yes #(Default=yes)
SLD wa Revision: Auto #(Default=Auto)
Rx Clock WA: Disabled #(default=Disabled)
PCI-E ASPM (Global): L1 Only #(Default=L1 Only)
PCIE Stop & Scream Support: Disabled #(default=Disabled)
Snoop Response Hold Off: 6 #(Default=6)
PCH Configuration:
Onboard Lan1: Enabled #(Default=Enabled)
Onboard Lan2: Enabled #(Default=Enabled)
Onboard Azalia: Auto #(Default=Auto)
PCH Devices:
Board Capability: DeepSx #(Default=DeepSx)
DeepSx Power Policies: Disabled #(default=Disabled)
GP27 Wake From DeepSx: Disabled #(default=Disabled)
SMBUS Device: Enabled #(Default=Enabled)
PCH Server Error Reporting Mode (S: Disabled #(default=Disabled)
PCH Display: Enabled #(Default=Enabled)
Serial IRQ Mode: Quite #(Default=Quiet)
External SSC Enable - CK420: Disabled #(default=Disabled)
Restore AC after Power Loss: Power Off #(Default=Power Off)
PCH CRID: Disabled #(default=Disabled)
PCI Express Configuration:
PCI-E ASPM Support (Global): L1 Only #(Default=L1 Only)
PCIE Clock Gating: Enabled #(Default=Enabled)
DMI Link Extended Synch Control: Disabled #(default=Disabled)
Expanded SPI TPM Transaction Lengt: Enabled #(Default=Enabled)
Substractive Decode: Disabled #(default=Disabled)
PCI Express Root Port 1:
PCI Express Root Port 1: Enabled #(Default=Enabled)
L1 Substates: L1.1 & L1.2 #(Default=L1.1 & L1.2)
PME SCI: Disabled #(default=Disabled)
Hot Plug: Disabled #(default=Disabled)
PCIe Speed: Auto #(Default=Auto)
PME Interrupt: Disabled #(default=Disabled)
Extra Bus Reserved: 0 #(default=0)
Reserved Memory: 10 #(default=10)
Prefetchable Memory: 10 #(default=10)
Reserved I/O: 0 #(default=0)
PCI Express Root Port 2:
PCI Express Root Port 2: Enabled #(Default=Enabled)
L1 Substates: L1.1 & L1.2 #(Default=L1.1 & L1.2)
PME SCI: Disabled #(default=Disabled)
Hot Plug: Disabled #(default=Disabled)
PCIe Speed: Auto #(Default=Auto)
PME Interrupt: Disabled #(default=Disabled)
Extra Bus Reserved: 0 #(default=0)
Reserved Memory: 10 #(default=10)
Prefetchable Memory: 10 #(default=10)
Reserved I/O: 0 #(default=0)
PCI Express Root Port 3:
PCI Express Root Port 3: Enabled #(Default=Enabled)
L1 Substates: L1.1 & L1.2 #(Default=L1.1 & L1.2)
PME SCI: Disabled #(default=Disabled)
Hot Plug: Disabled #(default=Disabled)
PCIe Speed: Auto #(Default=Auto)
PME Interrupt: Disabled #(default=Disabled)
Extra Bus Reserved: 0 #(default=0)
Reserved Memory: 10 #(default=10)
Prefetchable Memory: 10 #(default=10)
Reserved I/O: 0 #(default=0)
PCI Express Root Port 4:
PCI Express Root Port 4: Enabled #(Default=Enabled)
L1 Substates: L1.1 & L1.2 #(Default=L1.1 & L1.2)
PME SCI: Disabled #(default=Disabled)
Hot Plug: Disabled #(default=Disabled)
PCIe Speed: Auto #(Default=Auto)
PME Interrupt: Disabled #(default=Disabled)
Extra Bus Reserved: 0 #(default=0)
Reserved Memory: 10 #(default=10)
Prefetchable Memory: 10 #(default=10)
Reserved I/O: 0 #(default=0)
PCI Express Root Port 5:
PCI Express Root Port 5: Enabled #(Default=Enabled)
L1 Substates: L1.1 & L1.2 #(Default=L1.1 & L1.2)
PME SCI: Disabled #(default=Disabled)
Hot Plug: Disabled #(default=Disabled)
PCIe Speed: Auto #(Default=Auto)
PME Interrupt: Disabled #(default=Disabled)
Extra Bus Reserved: 0 #(default=0)
Reserved Memory: 10 #(default=10)
Prefetchable Memory: 10 #(default=10)
Reserved I/O: 0 #(default=0)
PCI Express Root Port 6:
PCI Express Root Port 6: Enabled #(Default=Enabled)
L1 Substates: L1.1 & L1.2 #(Default=L1.1 & L1.2)
PME SCI: Disabled #(default=Disabled)
Hot Plug: Disabled #(default=Disabled)
PCIe Speed: Auto #(Default=Auto)
PME Interrupt: Disabled #(default=Disabled)
Extra Bus Reserved: 0 #(default=0)
Reserved Memory: 10 #(default=10)
Prefetchable Memory: 10 #(default=10)
Reserved I/O: 0 #(default=0)
PCI Express Root Port 7:
PCI Express Root Port 7: Enabled #(Default=Enabled)
L1 Substates: L1.1 & L1.2 #(Default=L1.1 & L1.2)
PME SCI: Disabled #(default=Disabled)
Hot Plug: Disabled #(default=Disabled)
PCIe Speed: Auto #(Default=Auto)
PME Interrupt: Disabled #(default=Disabled)
Extra Bus Reserved: 0 #(default=0)
Reserved Memory: 10 #(default=10)
Prefetchable Memory: 10 #(default=10)
Reserved I/O: 0 #(default=0)
PCI Express Root Port 8:
PCI Express Root Port 8: Enabled #(Default=Enabled)
L1 Substates: L1.1 & L1.2 #(Default=L1.1 & L1.2)
PME SCI: Disabled #(default=Disabled)
Hot Plug: Disabled #(default=Disabled)
PCIe Speed: Auto #(Default=Auto)
PME Interrupt: Disabled #(default=Disabled)
Extra Bus Reserved: 0 #(default=0)
Reserved Memory: 10 #(default=10)
Prefetchable Memory: 10 #(default=10)
Reserved I/O: 0 #(default=0)
PCH sSATA Configuration:
PCH SATA Configuration:
USB Configuration:
USB Precondition: Disabled #(default=Disabled)
xHCI Mode: Auto #(Default=Auto)
Trunk Clock Gating (BTCG): Enabled #(Default=Enabled)
USB Port Per-Port Disable Control: Disabled #(default=Disabled)
XHCI Idle L1: Enabled #(Default=Enabled)
USB XCHI s755 WA: Enabled #(Default=Enabled)
USB XCHI Interrupt Remap WA: Enabled #(Default=Enabled)
Security Configuration:
GPIO Lockdown: Enabled #(Default=Enabled)
RTC Lock: Enabled #(Default=Enabled)
BIOS Lock: Disabled #(default=Disabled)
Host Flash Lock-Down: Disabled #(default=Disabled)
Gbe Flash Lock-Down: Enabled #(Default=Enabled)
Azalia Configuration:
Platform Thermal Configuration:
PCH Thermal Devices: Disabled #(default=Disabled)
Alert Enable Lock: Disabled #(default=Disabled)
Miscellaneous Configuration:
Fan PWM Offset: 0 #(default=0)
PCIe Max Read Request Size: 4096B #(Default=4096B)
PCIe Latency Tolerance Reporting: Enabled #(Default=Enabled)
PCI Minimum Secondary Bus Number: 1 #(default=1)
PCIe Extended Tag Enable: Enabled #(Default=Enabled)
PCIe AtomicOp Request Support: Disabled #(default=Disabled)
Breakpoint Type: none #(Default=none)
BIOS Guard: Disabled #(default=Disabled)
Serial Debug Message Level: Maximum #(Default=Maximum)
Trace Messages: Disabled #(default=Disabled)
Training Messages: Disabled #(default=Disabled)
RC Promote Warnings: Enabled #(Default=Enabled)
RC Promote MRC Warnings: Enabled #(Default=Enabled)
Active Video: Offboard Device #(Default=Offboard Device)
Target:VGA From CPU or from PCH: From CPU #(Default=From CPU)
RTC Wake System from S5: Disabled #(default=Disabled)
Server ME Debug Configuration:
Server ME General Configuration:
NM Configuration:
Reserve Memory:
Reserve Memory Range: Disabled #(default=Disabled)
Start Address: 100000 #(default=100000)
Reserve TAGEC Memory: Disabled #(default=Disabled) |
Merci d'avance
Pierre
