1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
| #include <LedControl.h>
#include <MD_MAX72xx.h>
//There will be 3 states, ONE, TWO, THREE, (+ one default called ZERO), each state is a sprite animation on the 8x8 LedMatrix,
//with the push of a button the states will go from one to an other
//Using a MAX7219
// pin 12 is connected to the DataIn
//pin 11 is connected to the CLK
//pin 10 is connected to LOAD
//pin 2 is connected to switch
#define button 2
LedControl display = LedControl(12, 11, 10, 1);
int state = 0; //integrer to hold current state
int old = 0; //integrer to hold last state
int buttonPoll = 0; //integrer to hold button state
const uint64_t ZERO[] PROGMEM = {
0x3c4281818181423c,
0x003c424242423c00,
0x0000182424180000,
0x0000001818000000,
0x0000182424180000,
0x0018244242241800,
0x003c424242423c00,
0x3c4281818181423c,
0x6681810000818166,
0x8100000000000081,
0x4281000000008142
};
const int ZERO_LEN = sizeof(ZERO) / 8;
const uint64_t ONE[] PROGMEM = {
0x3c4201010101023c,
0x3c0201010101423c,
0x1c0201010181423c,
0x0c0201018181423c,
0x040201818181423c,
0x000281818181423c,
0x004081818181423c,
0x204080818181423c,
0x304080808181423c,
0x384080808081423c,
0x3c4080808080423c,
0x3c4280808080403c,
0x3c42818080804038,
0x3c42818180804030,
0x3c42818181804020,
0x3c42818181814000,
0x3c42818181810200,
0x3c42818181010204,
0x3c4281810101020c,
0x3c4281010101021c
};
const int ONE_LEN = sizeof(ZERO) / 8;
const uint64_t TWO[] PROGMEM = {
0x0c0e0c0800000000,
0x0002070f00000000,
0x000000000f070200,
0x00000000080c0e0c,
0x0000000010307030,
0x00000000f0e04000,
0x0040e0f000000000,
0x3070301000000000
};
const int TWO_LEN = sizeof(ZERO) / 8;
const uint64_t THREE[] PROGMEM = {
0x3c4e8d9999b1723c,
0x3c46879db9e1623c,
0x3c4287bffde1423c,
0x3c4281ffff81423c,
0x3c42e1f99f87423c,
0x3c62f1b99d8f463c,
0x3c72b199998d4e3c,
0x3c5a999999995a3c
};
const int THREE_LEN = sizeof(ZERO) / 8;
void setup() {
pinMode (button, INPUT); //button set as input
display.shutdown(0, false);
/* Set the brightness to a medium values */
display.setIntensity(0, 7);
/* and clear the display */
display.clearDisplay(0);
}
void displayImage(uint64_t image) {
for (int i = 0; i < 8; i++) {
byte row = (image >> i * 8) & 0xFF;
for (int j = 0; j < 8; j++) {
display.setLed(0, i, j, bitRead(row, j));
}
}
}
int i = 0;
void loop() {
//debouncing routine to read button
buttonPoll = digitalRead(button); //poll the state of button
if (buttonPoll == 1) { //check if it has been pressed
delay(10); //wait 50ms
buttonPoll = digitalRead(button); //poll button again
if (buttonPoll == 0) { //if it is 0 considered one press
state = old + 1; //increase state by 1
}
}
else { //if button has not been pressed
delay(10); //wait 50ms
}
switch (state) { //react to button press & state
case 1: // if state is 1
//insert ONE
/*wheel pattern */
uint64_t one;
memcpy_P(&one, &ONE[i], 8);
displayImage(one);
if (++i >= ONE_LEN ) {
i = 0;
}
delay(100);
old = state;
break;
case 2:
uint64_t two;
memcpy_P(&two, &TWO[i], 8);
displayImage(two);
if (++i >= TWO_LEN ) {
i = 0;
}
delay(100);
old = state;
break;
case 3:
//insert THREE
uint64_t three;
memcpy_P(&three, &THREE[i], 8);
displayImage(three);
if (++i >= THREE_LEN ) {
i = 0;
}
delay(100);
old = state;
break;
default:
//insert ZERO
//if state is not 1,2,3
uint64_t zero;
memcpy_P(&zero, &ZERO[i], 8);
displayImage(zero);
if (++i >= ZERO_LEN ) {
i = 0;
}
delay(100);
old = 0;
break;
}
} |
