Install Pilote en ligne de commande

Bonjour,
J'ai besoin d'installer un driver avec un fichier ".inf" via une ligne de commande.

J'ai essayé : RUNDLL32.EXE SETUPAPI.DLL,InstallHinfSection DefaultInstall 128 C:\CHEMIN\FICHIER.inf

Message d'erreur : L'installation a échoué

Après plusieurs échec et recherche sur le net, il semblerait qu'aucun DefaultInstall n'est définit dans mon fichier .inf
Mais je n'ai toujours pas trouvé de solution à ce problème.
Pourriez-vous m'aider ?

Structure du fichier :

Citation:

---

[Version]
Signature="$WINDOWS NT$"
Provider=%Intel%
ClassGUID={4D36E968-E325-11CE-BFC1-08002BE10318}
Class=Display
CatalogFile=kit34379.cat

DriverVer=04/10/2011,8.15.10.2361

;
; Package Info for Co-Installer
;

[PackageInfo]
Name=Graphics
INFSource=%1%

[DestinationDirs]
DefaultDestDir = 11 ; system32
igfx.Miniport = 12 ; drivers
igfx.UserMode = 11 ; system32

;
; Driver information
;

[Manufacturer]
%Intel% = Intel.Mfg

[Intel.Mfg]
;;W;;

%iSNBGM1% = iSNBM0, PCI\VEN_8086&DEV_0106&SUBSYS_04AF1028;
%iSNBGM2% = iSNBM0, PCI\VEN_8086&DEV_0116&SUBSYS_04AF1028;
%iSNBGM2P% = iSNBM0, PCI\VEN_8086&DEV_0126&SUBSYS_04AF1028;

[iILKM0]
FeatureScore=E6
DelFiles=CUI.DelFiles
CopyFiles=igfx.Miniport, igfx.UserMode, MedKrnG575.Copy, Opm.Copy , CUI.Copy , CUISDK.Copy , Resource.Copy , OpenGL.Copy , DX10.Copy , CLK9.Copy
AddReg = igfx_SoftwareDX10Settings
AddReg = igfx_SoftwareCommonSettings
DelReg = igfx_RemoveDeviceSettings

[iILKM0.HW]
AddReg = igfx_MSI_HardwareDeviceSettings

[iILKD0]
FeatureScore=E6
DelFiles=CUI.DelFiles
CopyFiles=igfx.Miniport, igfx.UserMode, MedKrnG575.Copy, Opm.Copy , CUI.Copy , CUISDK.Copy , Resource.Copy , OpenGL.Copy , DX10.Copy , CLK9.Copy

[iILKD0.HW]
AddReg = igfx_MSI_HardwareDeviceSettings

[iSNBM0]
FeatureScore=E6
DelFiles=CUI.DelFiles
CopyFiles=igfx.Miniport, igfx.UserMode, MedKrnG600.Copy, DDE.Copy, Opm.Copy , CUI.Copy , CUISDK.Copy , Resource.Copy , OpenGL.Copy , DX10.Copy , CLK9.Copy
AddReg = igfx_SoftwareDX11Settings
AddReg = igfx_SoftwareCommonSettings


[iSNBM0.HW]
AddReg = igfx_MSI_HardwareDeviceSettings

[iSNBD0]
FeatureScore=E6
DelFiles=CUI.DelFiles
CopyFiles=igfx.Miniport, igfx.UserMode, MedKrnG600.Copy, DDE.Copy, Opm.Copy , CUI.Copy , CUISDK.Copy , Resource.Copy , OpenGL.Copy , DX10.Copy , CLK9.Copy
AddReg = igfx_SoftwareDX11Settings

[iSNBD0.HW]
AddReg = igfx_MSI_HardwareDeviceSettings

[iILKM0.CoInstallers]
AddReg = CoInst.AddReg
CopyFiles = CoInst.CopyFiles

[iILKD0.CoInstallers]
AddReg = CoInst.AddReg
CopyFiles = CoInst.CopyFiles

[iSNBM0.CoInstallers]
AddReg = CoInst.AddReg
CopyFiles = CoInst.CopyFiles

[iSNBD0.CoInstallers]
AddReg = CoInst.AddReg
CopyFiles = CoInst.CopyFiles

[CoInst.AddReg]
HKR,, CoInstallers32, %REG_MULTI_SZ%, "igfxCoIn_v2361.dll, CoDeviceInstall"

[CoInst.CopyFiles]
igfxCoIn_v2361.dll,igxpco32.dll,,0x00000010

;
; File sections
;
[CUI.DelFiles]
igfxres.dll,,,1

[igfx.Miniport]
igdkmd32.sys

[igfx.UserMode]
igdumd32.dll,,,0x00004000 ; COPYFLG_IN_USE_TRY_RENAME
igfxcmrt32.dll,,,0x00004000 ; COPYFLG_IN_USE_TRY_RENAME
IccLibDll.dll,,,0x00004000 ; COPYFLG_IN_USE_TRY_RENAME

[Opm.Copy]
iglhxs32.vp


[MedKrnG575.Copy]
igkrng575.bin,,,0x00004000 ; COPYFLG_IN_USE_TRY_RENAME

[MedKrnG600.Copy]
igkrng600.bin,,,0x00004000 ; COPYFLG_IN_USE_TRY_RENAME

[DDE.Copy]
igdde32.dll,,,0x00004000 ; COPYFLG_IN_USE_TRY_RENAME

;
; Start CUI Copy Sections
;
[CUI.Copy]
hccutils.dll,,,0x00004000 ; COPYFLG_IN_USE_TRY_RENAME
igfxsrvc.dll,,,0x00004000 ; COPYFLG_IN_USE_TRY_RENAME

[CUISDK.Copy]
igfxext.exe ; CUI SDK
igfxexps.dll,,,0x00004000 ; COPYFLG_IN_USE_TRY_RENAME ; CUI SDK proxy stub

[Resource.Copy]
; Language Resource files
igfxrara.lrc ; Arabic
igfxrchs.lrc ; Simplified Chinese
;
; End CUI Copy Sections
;

[OpenGL.Copy]
ig4icd32.dll,,,0x00004000 ; COPYFLG_IN_USE_TRY_RENAME

[OpenGL.AddReg]
HKR,, OpenGLDriverName, %REG_MULTI_SZ%, ig4icd32.dll

[OpenGL.AddRegSmch.ILK]
HKR,, _oglapp_etqw.exe, %REG_DWORD%, 0x00000001

[OpenGL.AddRegSmch.SNB]
HKR,, _oglapp_UT2004.exe, %REG_DWORD%, 0x00000001

[OpenGL.DelRegSmch]
HKR,, _oglapp_etqw.exe

[DX10.Copy]
igd10umd32.dll,,,0x00004000 ; COPYFLG_IN_USE_TRY_RENAME
d3dx10_40.dll,,,0x00004000 ; COPYFLG_IN_USE_TRY_RENAME

[CLK9.Copy]
igdumdx32.dll,,,0x00004000 ; COPYFLG_IN_USE_TRY_RENAME

[igfx_RegisterDX10DLL]

11,,igd10umd32.dll,1

[igfx_RegisterDLLs]
11,,igdumd32.dll,1

[CUI.DelReg]
HKLM,%CUIDeviceIndependentKey%

[iILKM0.Services]
AddService = igfx, 0x00000002, igfx_Service_Inst

[iILKD0.Services]
AddService = igfx, 0x00000002, igfx_Service_Inst

[iSNBM0.Services]
AddService = igfx, 0x00000002, igfx_Service_Inst

[iSNBD0.Services]
AddService = igfx, 0x00000002, igfx_Service_Inst

[igfx_Service_Inst]
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
;
; DX10 Capable SKUS
;
[igfx_SoftwareDX10Settings]

HKR,, InstalledDisplayDrivers, %REG_MULTI_SZ%, igdumdx32, igd10umd32
HKR,, UserModeDriverName, %REG_MULTI_SZ%, igdumdx32.dll, igd10umd32.dll

;
; DX11 Capable SKUS
;
[igfx_SoftwareDX11Settings]

HKR,, InstalledDisplayDrivers, %REG_MULTI_SZ%, igdumdx32, igd10umd32, igd10umd32
HKR,, UserModeDriverName, %REG_MULTI_SZ%, igdumdx32.dll, igd10umd32.dll, igd10umd32.dll

;
;MBM Specific settings
;
[ILKM_MBMSettings_AddSwSettings]
HKR,, Display1_ENABLEMBM,%REG_DWORD%, 0
HKR,, PrefCUIMBM,%REG_DWORD%, 0

[ILKM_MBMSettings_DelSwSettings]
HKR,, Display1_ENABLEMBM
HKR,, PrefCUIMBM

[SNBM_MBMSettings_AddSwSettings]
HKR,, Display1_ENABLEMBM,%REG_DWORD%, 0
HKR,, PrefCUIMBM,%REG_DWORD%, 0

[SNBM_MBMSettings_DelSwSettings]
HKR,, Display1_ENABLEMBM


[igfx_TPV_AddSwSettings]
HKR,, TPVSolutionEnabled, %REG_DWORD%, 1
HKR,, MAXViews, %REG_DWORD%, 2

[igfx_TPV_DelSwSettings]
HKR,, TPVSolutionEnabled

[igfx_SoftwareCommonSettings]
HKR,, UserModeDriverGUID, %REG_SZ%, "{6C4BE3D5-831A-42ED-AA62-2AEB34C8CBA4}"
HKR,, MultifunctionSupported, %REG_DWORD%, 1

[igfx_MSI_HardwareDeviceSettings]
; MSI Support
HKR, "Interrupt Management", 0x00000010

[igfx_RemoveDeviceSettings]
HKR,, VgaCompatible

[Enable3DContexts_ILK_DT_DelSwSettings]

HKR,, ~3DMarkVantage.exe
HKR,, ~3DMarkVantageCmd.exe
HKR,, ~RelicCoH.exe

[NonEDIDMode_AddSwSettings]
HKR,, TotalDTDCount, %REG_DWORD%, 0 ; This shows number of DTDs to be used. ; 0-->Disable the feature.
;Following keys have 20 bytes (18 byte DTD + 2 Byte flags).
HKR,, DTD_1,%REG_BINARY%, 01,1D,80,18,71,1C,16,20,58,2C,1A,00,00,00,00,00,00,86,37,01 ;1920x1080@60...Interlaced
HKR,, DTD_2, %REG_BINARY%, 01,1D,80,D0,72,1C,16,20,10,2C,1A,80,00,00,00,00,00,86,37, 01 ;1920x1080@50...Interlaced
HKR,, DTD_3,%REG_BINARY%, 01,1D,00,BC,52,D0,1E,20,B8,28,25,40,00,00,00,00,00,04,37, 01 ;1280x720@50....Non-interlaced
HKR,, DTD_4, %REG_BINARY%, 01,1D,00,72,51,D0,1E,20,6E,28,25,00,00,00,00,00,00,06,37,01 ;1280x720@60....Non-interlaced
HKR,, DTD_5,%REG_BINARY%, 00, 00, 00 ,00, 00, 00,00, 00, 00,00, 00, 00,00, 00, 00,00, 00, 00,00, 00 ;Fifth DTD

[NonEDIDMode_DelSwSettings]
HKR,, TotalDTDCount
HKR,, DTD_1
HKR,, DTD_2
HKR,, DTD_3
HKR,, DTD_4
HKR,, DTD_5

[CRTHotPlugDefaultVrefVoltage_AddSwSettings]
HKR,, Display1_EnableCRTHotPlugDefaultVrefVoltage, %REG_DWORD%, 1 ; 1 - Enable(Default Value) and 0 - Disable(Customized Value)

[CRTHotPlugDefaultVrefVoltage_DelSwSettings]
HKR,, Display1_EnableCRTHotPlugDefaultVrefVoltage

[DynamicScaling_AddSwSettings]
HKR,, Display1_EnableDynamicScaling,%REG_DWORD%, 0 ; 1 - Enable and 0 - Disable

[DynamicScaling_DelSwSettings]
HKR,, Display1_EnableDynamicScaling

[eDPNoFLT_AddSwSettings]
;If this Registry is set to 1 then it will ignore the Fast Link Training and will always do Normal Link Training everytime
HKR,, NoFastLinkTrainingForeDP, %REG_DWORD%, 0

[eDPNoFLT_DelSwSettings]
HKR,, NoFastLinkTrainingForeDP

[DynamicClockGating_AddSwSettings]
HKR,, EnableDynamicClockGating, %REG_DWORD%, 1 ;1 - Enable and 0 - Disable

[DynamicClockGating_DelSwSettings]
HKR,, EnableDynamicClockGating

[DelayedDetectionForDP_AddSwSettings]
HKR,, DelayedDetectionForDP,%REG_DWORD%, 500 ; Delay in ms Range - 0 - 1000

[DelayedDetectionForDP_DelSwSettings]
HKR,, DelayedDetectionForDP

[DelayedDetectionForHDMI_AddSwSettings]
HKR,, DelayedDetectionForHDMI,%REG_DWORD%, 1000 ; Delay in ms Range - 0 - 1000

[DelayedDetectionForHDMI_DelSwSettings]
HKR,, DelayedDetectionForHDMI

[EnableInterlacedModeRemoval_AddSwSettings]
HKR,, EnableInterlacedModeRemoval,%REG_DWORD%, 1 ; 1 - Enable and 0 - Disable

[EnableInterlacedModeRemoval_DelSwSettings]
HKR,, EnableInterlacedModeRemoval

[ForceBorderForMAR_AddSwSettings]
HKR,, ForceBorderForMAR,%REG_DWORD%, 0 ; 1 - Enable and 0 - Disable

[ForceBorderForMAR_DelSwSettings]
HKR,, ForceBorderForMAR

[Gen6IntLVDSSwing_AddSwSettings]
;0x00 - Medium - Data and Clk Swing set to 298 mV
;0x01 - High - Data and Clk Swing set to 320 mV
;0x02 - Low1 - Data and Clk Swing set to 144 mV
;0x04 - Low2 - Data and Clk Swing set to 170 mV
;0x08 - Low3 - Data and Clk Swing set to 196 mV
;0x10 - Low4 - Data and Clk Swing set to 220 mV
;0x20 - Low5 - Data and Clk Swing set to 247 mV
;0x40 - Low6 - Data and Clk Swing set to 273 mV
HKR,, IntLVDSSwingSetting,%REG_DWORD%, 0x00

[Gen6IntLVDSSwing_DelSwSettings]
HKR,, IntLVDSSwingSetting

[RedBlankingPnl_AddSwSettings]
HKR,, EnableReducedBlankingPnlWA,%REG_DWORD%, 0x00 ; 0x00- Disable, 0x01 - Enable

[RedBlankingPnl_DelSwSettings]
HKR,, EnableReducedBlankingPnlWA

[AsyncFlips_AddSwSettings]
HKR,, Display1_DisableAsyncFlips,%REG_DWORD%, 0 ; 1 - Disable and 0 - Enable

[AsyncFlips_DelSwSettings]
HKR,, Display1_DisableAsyncFlips

[HDMICEATimings_AddSwSettings]
HKR,, Display1_EnableHDMICEATimingsOnly,%REG_DWORD%, 0 ; 1 - Enable and 0 - Disable

[HDMICEATimings_DelSwSettings]
HKR,, Display1_EnableHDMICEATimingsOnly

[SdvoDdcEdidRead_AddSwSettings]
HKR,, Display1_DisableSdvoCrtEdidRead ,%REG_DWORD%, 0 ; 1 - Enable and 0 - Disable

[SdvoDdcEdidRead_DelSwSettings]
HKR,, Display1_DisableSdvoCrtEdidRead

[MediaScaling_AddSwSettings]
HKR,, Display1_EnableMediaScaling,%REG_DWORD%, 0 ; 1 - Enable and 0 - Disable

[MediaScaling_DelSwSettings]
HKR,, Display1_EnableMediaScaling

;To enable VBT override through INF
[INFVBTOverride_AddSwSettings]
HKR,, INF_VBT_Override_EnableFeature,%REG_DWORD%, 0

[INFVBTOverride_DelSwSettings]
HKR,, INF_VBT_Override_EnableFeature

; OPTIONS FOR HOTPLUG THROUGH INF
;2 - Apply selected logic selected in VBT
;0 - Disable Hot Plug
;1 - Enable Hot Plug
;NOTE: Enable "INF_VBT_Override_EnableFeature" flag to use below given INF entries

[INFHotPlug_AddSwSettings]
HKR,, HotPlug_DVO_SDVO,%REG_DWORD%, 2
HKR,, HotPlug_CRT,%REG_DWORD%, 2

[INFHotPlug_DelSwSettings]
HKR,,HotPlug_DVO_SDVO
HKR,,HotPlug_CRT

[OEMStaticMode_AddSwSettings]
HKR,, TotalStaticModes, %REG_DWORD%, 0 ; This shows number of Static modes to be used.
;TotalStaticModes = 0-->Disable the feature.
;Following keys have 8 bytes:
; 2B XRes + 2B YRes
; + 2B RRMask (Bit 0 - 60, 1 -70, 2 - 72, 3 - 75, 4 - 85,5 - 100,6 - 120,7-15 reserved)
; + 1B BppMask(Bit 0 - 8bpp,1 - 16bpp,2 - 32bpp, 3-7 reserved)
; + 1B reserved.
; all values in Hex; l->low byte, h->high byte
;Examples:
; xl xh yl yh rl rh bp Rv
;HKR,, STATIC_MODE_1,%REG_BINARY%, 20,03,58,02,03,00,07,0F ;8x6 60,70
;HKR,, STATIC_MODE_2,%REG_BINARY%, 20,03,58,02,20,00,04,0F ;8x6 100 : 32bpp

[OEMStaticMode_DelSwSettings]
;HKR,, STATIC_MODE_1
;HKR,, STATIC_MODE_2

[MediaSrcMode_AddSwSettings]
HKR,, TotalMediaSrcModes, %REG_DWORD%, 0 ; This shows number of Media Source to be used.
;TotalMediaSrcModes = 0-->No Modes Added.
;Modes added must be < 10x7
;Following keys have 8 bytes:
; 2B XRes + 2B YRes
; + 1B reserved.
; all values in Hex; l->low byte, h->high byte
;Examples:
; xl xh yl yh Rv
;HKR,, MEDIA_MODE_1,%REG_BINARY%, D0,02,E0,01,0F ;720x480
;HKR,, MEDIA_MODE_2,%REG_BINARY%, 20,03,58,02,0F ;800x600

[MediaSrcMode_DelSwSettings]
;HKR,, MEDIA_MODE_1
;HKR,, MEDIA_MODE_2

[MediaRefreshRateMode_AddSwSettings]
HKR,, MediaRefreshRateMask, %REG_DWORD%, 0 ; Mask to enable media refresh rates BIT0 - LFP BIT1-7 :Reserved

[MediaRefreshRateMode_DelSwSettings]
HKR,, MediaRefreshRateMask

[BitBashingSupport_AddSwSettings]
; This is used to enable Bit Bashing instead of GMBUS to read monitor EDID for each
; Display Type.
; CRTType - BIT0, DFPType - BIT1, LFPType - BIT2, BIT[3:7] - Reserved.
HKR,, BitBashingSupport, %REG_BINARY%, 0

[BitBashingSupport_DelSwSettings]
HKR,, BitBashingSupport

[BitBashingForHDCP_AddSwSettings]
;This is to use BitBashing instead of GMBUS for HDCP
HKR,, BitBashingForHDCP, %REG_BINARY%, 0

[BitBashingForHDCP_DelSwSettings]
HKR,, BitBashingForHDCP

[CRTScaler_AddSwSettings]
; This is used to enable Scaler on CRT
HKR,, EnableDynamicScalingWithHwScaler, %REG_DWORD%, 1

[CRTScaler_DelSwSettings]
HKR,, EnableDynamicScalingWithHwScaler

[InternalScaler_AddSwSettings]
; This is used to enable Scaler on CRT
HKR,, EnableInternalScalar, %REG_DWORD%, 0

[InternalScaler_DelSwSettings]
HKR,, EnableInternalScalar

[PNM_AddSwSettings]
HKR,, PNMClkDeviation, %REG_DWORD%, 0 ;Clock deviation value which is multiplied by 10.
HKR,, PNMFlags, %REG_DWORD%, 0 ; Bit0:Downward Deviation, Bit1: Upward Deviation. Bit2-31: Reserved.

[PNM_DelSwSettings]
HKR,, PNMClkDeviation
HKR,, PNMFlags

[SDVOHDMI_VSI_AddSwSettings]
HKR,, SPDIFVendorName,%REG_SZ%, "Intel" ; max 8 characters
HKR,, SPDIFVendorDesc,%REG_SZ%, "9xxxx" ; max 16 characters
HKR,, SDVOHDMI_OptionalIFPriority,%REG_DWORD%, 0x21 ; default to priority 1 for SPD Infoframe and priority 2 for VS Infoframe
HKR,, SDVOHDMI_SupportCEA861D,%REG_DWORD%, 0 ;To enable support for 861D spec, 1-Support IT Content and RGB Quantization, 0- No 861D support. Default to 0.

[SDVOHDMI_VSI_DelSwSettings]
HKR,, SPDIFVendorName
HKR,, SPDIFVendorDesc
HKR,, SDVOHDMI_OptionalIFPriority
HKR,, SDVOHDMI_SupportCEA861D

[PwrCons_ILK_AddSwSettings]
HKR,, FeatureTestControl,%REG_DWORD%, 0xF840 ; Enable FBC, GSV, RC6, DPS, DPST5, Vista Backlight Control, GPMT, Turbo

[PwrCons_ILK_DelSwSettings]
HKR,, FeatureTestControl

[PwrCons_SNB_AddSwSettings]
HKR,, FeatureTestControl,%REG_DWORD%, 0xF840
HKR,, RsDisableDeepRC6,%REG_DWORD%, 1
HKR,, GsvApplyIACapForDesktop,%REG_DWORD%, 0
HKR,, GsvApplyIACapForMobileAC,%REG_DWORD%, 0

[PwrCons_SNB_DelSwSettings]
HKR,, FeatureTestControl
HKR,, RsDisableDeepRC6
HKR,, GsvApplyIACapForDesktop
HKR,, GsvApplyIACapForMobileAC

[PwrCons_DPS_AddSwSettings]
HKR,, DPSCheckboxDefault,%REG_DWORD%, 0x1
HKR,, DPSBaseLoRRValue,%REG_DWORD%, 0x0
HKR,, Display1_DPSPanel_Type,%REG_DWORD%, 0xFF ;Normal/Static DRRS = 0, Seamless = 2, or Disable INF option = 0xFF
HKR,, DPSMotionArtifactMitigation,%REG_DWORD%, 0x1
HKR,, SupportForStaticDRRS,%REG_DWORD%, 0x0

[PwrCons_DPS_DelSwSettings]
HKR,, DPSCheckboxDefault
HKR,, DPSControlMode
HKR,, DPSBaseLoRRValue
HKR,, Display1_DPSPanel_Type
HKR,, DPSMotionArtifactMitigation
HKR,, SupportForStaticDRRS

[HotPlug_AddSwSettings]
HKR,, Display1_DVIHotPlugWAFlag,%REG_DWORD%, 0 ; 1 - Enable and 0 - Disable

[HotPlug_DelSwSettings]
HKR,, Display1_DVIHotPlugWAFlag

[Underscan_AddSwSettings]
;INTTVOUT
HKR,, Display1_UnderScanPercentageIntTvOut,%REG_DWORD%, 0 ; 0 - default 7.5% under scan and OEM's can give under scan like 8,9 an 10 ..upto 25
;HDMI
HKR,, Display1_AddUnderscanPercentageHDMI,%REG_DWORD%, 0 ; 0 - default 7.5% under scan and OEM's can give under scan like 8,9 an 10 ..

[Underscan_DelSwSettings]
HKR,, Display1_UnderScanPercentageIntTvOut
HKR,, Display1_AddUnderscanPercentageHDMI

[General_AddSwSettings]
HKR,, ModeEnumerationPreference,%REG_DWORD%, 0xFFFFFFFF ; BitMask for Displays. If Set to 1, it indicates OEM Mode is preferred over EDID.
; Default Value is OEM is preferred over EDID
; Bit 0- CRT:Bit 2- DFP:Bit 1 and 3 reserved.

[General_DelSwSettings]
HKR,, ModeEnumerationPreference

[IncFixedSegWA_AddSwSettings]
HKR,, IncreaseFixedSegment,%REG_DWORD%, 0 ; 0 - disabled, 1- enabled

[IncFixedSegWA_DelSwSettings]
HKR,, IncreaseFixedSegment

[PanelFitterOnDP_AddSwSettings]
HKR,, DisablePFonDP,%REG_DWORD%, 0x00 ; 0x00- Enable, 0x01 - Disable... Not applicable for eDP panels.

[PanelFitterOnDP_DelSwSettings]
HKR,, DisablePFonDP

[UseEDIDTimingForCRTClone_AddSwSettings]
HKR,, UseEDIDOnlyCRTMode,%REG_DWORD%, 0x00 ; 0x00- Disable, 0x01 - Enable. Use Only EDID Timing for CRT on Clone Mode

[UseEDIDTimingForCRTClone_DelSwSettings]
HKR,, UseEDIDOnlyCRTMode

[XVYCCFeatture_AddSwSettings]
HKR,, XVYCCFeatureEnable,%REG_DWORD%, 0x01 ; 0x00- Disable, 0x01 - Enable...
; When XVYCC feature is enabled, on corresponding display Hue and Saturation feature is disabled

[XVYCCFeatture_DelSwSettings]
HKR,, XVYCCFeatureEnable

[DeepColorHDMI_AddSwSettings]
HKR,, DeepColorHDMIDisable,%REG_DWORD%, 0 ; 0- Enable Deep Color, 1 - Disable Deep Color

[DeepColorHDMI_DelSwSettings]
HKR,, DeepColorHDMIDisable

[WGFeature_AddSwSettings]
HKR,, WideGamutFeatureEnable,%REG_DWORD%, 0x00 ; 0x01- Enable for LFP, 0x02 - Enable for DP, 0x04 - Enable for HDMI...
; When Wide Gamut feature is enabled, Hue and Saturation feature is disabled

[WGFeature_DelSwSettings]
HKR,, WideGamutFeatureEnable

[PdTogglingTimer_AddSwSettings]
HKR,, PdTogglingTimerValue,%REG_DWORD%, 0xBF ; Bug 3885162, increasing the delay value.

[PdTogglingTimer_DelSwSettings]
HKR,, PdTogglingTimerValue

[Enable3DContexts_SNBD0_AddSwSettings]
; Workstation apps settings
HKR,, @acad.exe, %REG_DWORD%, 1
HKR,, @MstnBenchmark.exe, %REG_DWORD%, 1

[Enable3DContexts_SNBD0_DelSwSettings]
; Workstation apps settings
HKR,, @acad.exe
HKR,, @MstnBenchmark.exe

; END DEVICE SPECIFIC INF SWITCHES

[iILKM0.GeneralConfigData]
MaximumNumberOfDevices = 2
MaximumDeviceMemoryConfiguration = 512

[iILKD0.GeneralConfigData]
MaximumNumberOfDevices = 2
MaximumDeviceMemoryConfiguration = 512

[iSNBM0.GeneralConfigData]
MaximumNumberOfDevices = 2
MaximumDeviceMemoryConfiguration = 512

[iSNBD0.GeneralConfigData]
MaximumNumberOfDevices = 2
MaximumDeviceMemoryConfiguration = 512

;
; Source file information
;

[SourceDisksNames]
1 = %DiskId%

[SourceDisksFiles]


[TVWizard.AddReg]

[CUI.AddReg]
;Add INTEL/CUI keys
HKLM,"Software\INTEL"

[CUISDK.AddReg]


[CUISDK.DelReg]
HKR,Igfxext
;
; End CUI Registry Sections
;
[PowerPlanSettings]
;Intel Graphics Power Plan
Default = %GUID_MIN_POWER_SAVINGS%, %DC%, 2

[Strings]
;DPPE
GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"

---

Et j'ai supprimé l'ensemble des lignes entre les balises. :lol:

Merci d'avance ! :ccool:

Salut,

Ton fichier inf est incomplet, ou très allégé, tu aurais dû faire une pièce jointe.
Il n'y a pas de section defaultinstall car le fichier est utilisé pour différente déclinaison d'un matériel, apparemment un processeur graphique (?).

Le mieux est d'utiliser le fichier msi ou l'exe joint, qui souvent peuvent être lancés silencieusement en ligne de commande.
La deuxième solution, avec rundll32... en remplacent defaultinstall par la section qui correspond à ton matériel (que tu as identifié au préalable) que tu trouves dans [Intel.Mfg], à savoir iIlKMO, iSNBMO, ect... mais tel que cité, c'est incomplet.
Une troisième, avec l'utilitaire Devcon (voir l'aide en ligne pour plus de détails) qui permet d'installer un matériel à partir de son id.

Merci de ta réponse ! :)
Je n'ai pas de fichier msi dans mon repertoire et les exe ne donne aucun résultat lorsque je les lance..

J'ai mis en pièce jointe mon fichier inf complet. ;)

Edit : J'ai beau avoir essayé l'ensemble des points ci-dessous dans mon paramètre de commande, toujours la même erreur. :(

iILKGM0 = "Intel(R) HD Graphics"
iILKG0 = "Intel(R) HD Graphics"
iSNBGM1 = "Intel(R) HD Graphics Family"
iSNBGD1 = "Intel(R) HD Graphics Family"
iSNBGM2 = "Intel(R) HD Graphics Family"
iSNBGD2 = "Intel(R) HD Graphics Family"
iSNBGM2P = "Intel(R) HD Graphics Family"
iSNBGD2P = "Intel(R) HD Graphics Family"
iSNBGD3 = "Intel(R) HD Graphics Family"

T'as essayé avec l'option install de devcon ? -> http://support.microsoft.com/kb/311272/fr

Sinon, une alternative serait de télécharger la dernière version du driver de ta carte ou chip graphique. Il y a toujours un fichier msi ou setup avec. Bien sur, l'install nécessite des droits admin, et parfois la désactivation de l'antivirus (après t'être assuré que le package téléchargé est fiable).

Pour finir je suis aller rechercher le pilote sur le site du fabriquant et y'avait un setup.exe :D
Merci de ton aide ! :ccool: