1. #1
    Nouveau membre du Club
    Profil pro
    Inscrit en
    janvier 2007
    Messages
    46
    Détails du profil
    Informations personnelles :
    Localisation : France

    Informations forums :
    Inscription : janvier 2007
    Messages : 46
    Points : 34
    Points
    34

    Par défaut Problème de partage imprimante samba HP Laserjet M1005

    Bonjour,
    J'ai plusieurs ordinateur. Un serveur principal sous Ubuntu 7.10 Gutsy Gibbon, 2 ordinateurs sous windows XP Pro, et un apple sous MacOs Leopard. J'utilise Samba pour partager des fichiers et cela marche très bien. Mes données sont sur un disque externe sur mon serveur Ubuntu et visibles sous Windows et MacOS grâce à Samba. Je viens d'acheter une imprimante HP LaserJet M1005. J'utilise le driver foo2xqx qui fonctionne correctement. J'arrive à utiliser l'imprimante depuis le serveur Ubuntu. La où cela commence à se gâter c'est donc pour le partage de l'imprimante avec Samba. J'ai lu ici et la qu'il était peut être possible de ne pas utiliser Samba et d'utiliser directement CUPS... Est ce vrai ?

    J'ai donc utilisé Samba car j'ai plus ou moins compris comment cela marchait avec des répertoires alors pourquoi pas une imprimante...

    Mon répertoire /var/spool/cups/ contient un fichier c00001 -> est ce mon imprimante ? J'ai considéré que c'était le cas ... Du coup j'ai configuré mon /etc/samba/smb.conf comme suit (j'ai rajouté les lignes de [LaserJet_M1005_MPC] à hosts allow : ... ). Les dernières lignes à partir de [Medias] sont les lignes qui font fonctionner mon partage de fichier (si il y a une erreur merci de me le signaler aussi, mais en tout cas ça marche très bien) :

    Code : Sélectionner tout - Visualiser dans une fenêtre à part
    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16
    17
    18
    19
    20
    21
    22
    23
    24
    25
    26
    27
    28
    29
    30
    31
    32
    33
    34
    35
    36
    37
    38
    39
    40
    41
    42
    43
    44
    45
    46
    47
    48
    49
    50
    51
    52
    53
    54
    55
    56
    57
    58
    59
    60
    61
    62
    63
    64
    65
    66
    67
    68
    69
    70
    71
    72
    73
    74
    75
    76
    77
    78
    79
    80
    81
    82
    83
    84
    85
    86
    87
    88
    89
    90
    91
    92
    93
    94
    95
    96
    97
    98
    99
    100
    101
    102
    103
    104
    105
    106
    107
    108
    109
    110
    111
    112
    113
    114
    115
    116
    117
    118
    119
    120
    121
    122
    123
    124
    125
    126
    127
    128
    129
    130
    131
    132
    133
    134
    135
    136
    137
    138
    139
    140
    141
    142
    143
    144
    145
    146
    147
    148
    149
    150
    151
    152
    153
    154
    155
    156
    157
    158
    159
    160
    161
    162
    163
    164
    165
    166
    167
    168
    169
    170
    171
    172
    173
    174
    175
    176
    177
    178
    179
    180
    181
    182
    183
    184
    185
    186
    187
    188
    189
    190
    191
    192
    193
    194
    195
    196
    197
    198
    199
    200
    201
    202
    203
    204
    205
    206
    207
    208
    209
    210
    211
    212
    213
    214
    215
    216
    217
    218
    219
    220
    221
    222
    223
    224
    225
    226
    227
    228
    229
    230
    231
    232
    233
    234
    235
    236
    237
    238
    239
    240
    241
    242
    243
    244
    245
    246
    247
    248
    249
    250
    251
    252
    253
    254
    255
    256
    257
    258
    259
    260
    261
    262
    263
    264
    265
    266
    267
    268
    269
    270
    271
    272
    273
    274
    275
    276
    277
    278
    279
    280
    281
    282
    283
    284
    285
    286
    287
    288
    289
    290
    291
    292
    293
    294
    295
    296
    297
    298
    299
    300
    301
    302
    303
    304
    305
    306
    307
    308
    309
    310
    311
    312
    313
    314
    315
    316
    317
    318
    319
    320
    321
    322
    323
    324
    325
    326
    327
    328
    329
    330
    331
    332
    333
    334
     
    #
    # Sample configuration file for the Samba suite for Debian GNU/Linux.
    #
    #
    # This is the main Samba configuration file. You should read the
    # smb.conf(5) manual page in order to understand the options listed
    # here. Samba has a huge number of configurable options most of which 
    # are not shown in this example
    #
    # Any line which starts with a ; (semi-colon) or a # (hash) 
    # is a comment and is ignored. In this example we will use a #
    # for commentary and a ; for parts of the config file that you
    # may wish to enable
    #
    # NOTE: Whenever you modify this file you should run the command
    # "testparm" to check that you have not made any basic syntactic 
    # errors. 
    #
     
    #======================= Global Settings =======================
     
    [global]
     
    ## Browsing/Identification ###
     
    # Change this to the workgroup/NT-domain name your Samba server will part of
       workgroup = MSHOME
     
    # server string is the equivalent of the NT Description field
       server string = %h
     
    # Windows Internet Name Serving Support Section:
    # WINS Support - Tells the NMBD component of Samba to enable its WINS Server
    ;   wins support = no
     
    # WINS Server - Tells the NMBD components of Samba to be a WINS Client
    # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
    ;   wins server = w.x.y.z
     
    # This will prevent nmbd to search for NetBIOS names through DNS.
       dns proxy = no
     
    # What naming service and in what order should we use to resolve host names
    # to IP addresses
    ;   name resolve order = lmhosts host wins bcast
     
    #### Networking ####
     
    # The specific set of interfaces / networks to bind to
    # This can be either the interface name or an IP address/netmask;
    # interface names are normally preferred
    ;   interfaces = 127.0.0.0/8 eth0
     
    # Only bind to the named interfaces and/or networks; you must use the
    # 'interfaces' option above to use this.
    # It is recommended that you enable this feature if your Samba machine is
    # not protected by a firewall or is a firewall itself.  However, this
    # option cannot handle dynamic or non-broadcast interfaces correctly.
    ;   bind interfaces only = true
     
     
     
    #### Debugging/Accounting ####
     
    # This tells Samba to use a separate log file for each machine
    # that connects
       log file = /var/log/samba/log.%m
     
    # Put a capping on the size of the log files (in Kb).
       max log size = 1000
     
    # If you want Samba to only log through syslog then set the following
    # parameter to 'yes'.
    ;   syslog only = no
     
    # We want Samba to log a minimum amount of information to syslog. Everything
    # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
    # through syslog you should set the following parameter to something higher.
       syslog = 0
     
    # Do something sensible when Samba crashes: mail the admin a backtrace
       panic action = /usr/share/samba/panic-action %d
     
     
    ####### Authentication #######
     
    # "security = user" is always a good idea. This will require a Unix account
    # in this server for every user accessing the server. See
    # /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
    # in the samba-doc package for details.
      security = user
     
    # You may wish to use password encryption.  See the section on
    # 'encrypt passwords' in the smb.conf(5) manpage before enabling.
       encrypt passwords = true
     
    # If you are using encrypted passwords, Samba will need to know what
    # password database type you are using.  
       passdb backend = tdbsam
     
       obey pam restrictions = yes
     
    ;   guest account = nobody
       invalid users = root
     
    # This boolean parameter controls whether Samba attempts to sync the Unix
    # password with the SMB password when the encrypted SMB password in the
    # passdb is changed.
    ;   unix password sync = no
     
    # For Unix password sync to work on a Debian GNU/Linux system, the following
    # parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
    # sending the correct chat script for the passwd program in Debian Sarge).
       passwd program = /usr/bin/passwd %u
       passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n *passwd:*password\supdated\ssuccessfully* .
     
    # This boolean controls whether PAM will be used for password changes
    # when requested by an SMB client instead of the program listed in
    # 'passwd program'. The default is 'no'.
    ;   pam password change = no
     
    ########## Domains ###########
     
    # Is this machine able to authenticate users. Both PDC and BDC
    # must have this setting enabled. If you are the BDC you must
    # change the 'domain master' setting to no
    #
    ;   domain logons = yes
    #
    # The following setting only takes effect if 'domain logons' is set
    # It specifies the location of the user's profile directory
    # from the client point of view)
    # The following required a [profiles] share to be setup on the
    # samba server (see below)
    ;   logon path = \\%N\profiles\%U
    # Another common choice is storing the profile in the user's home directory
    ;   logon path = \\%N\%U\profile
     
    # The following setting only takes effect if 'domain logons' is set
    # It specifies the location of a user's home directory (from the client
    # point of view)
    ;   logon drive = H:
    ;   logon home = \\%N\%U
     
    # The following setting only takes effect if 'domain logons' is set
    # It specifies the script to run during logon. The script must be stored
    # in the [netlogon] share
    # NOTE: Must be store in 'DOS' file format convention
    ;   logon script = logon.cmd
     
    # This allows Unix users to be created on the domain controller via the SAMR
    # RPC pipe.  The example command creates a user account with a disabled Unix
    # password; please adapt to your needs
    ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
     
    ########## Printing ##########
     
    # If you want to automatically load your printer list rather
    # than setting them up individually then you'll need this
    ;   load printers = yes
     
    # lpr(ng) printing. You may wish to override the location of the
    # printcap file
    ;   printing = bsd
    ;   printcap name = /etc/cups/printers.conf
     
    # CUPS printing.  See also the cupsaddsmb(8) manpage in the
    # cupsys-client package.
    ;   printing = cups
    ;   printcap name = cups
     
    # When using [print$], root is implicitly a 'printer admin', but you can
    # also give this right to other users to add drivers and set printer
    # properties
    ;   printer admin = @lpadmin
     
     
    ############ Misc ############
     
    # Using the following line enables you to customise your configuration
    # on a per machine basis. The %m gets replaced with the netbios name
    # of the machine that is connecting
    ;   include = /home/samba/etc/smb.conf.%m
     
    # Most people will find that this option gives better performance.
    # See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
    # for details
    # You may want to add the following on a Linux system:
    #         SO_RCVBUF=8192 SO_SNDBUF=8192
       socket options = TCP_NODELAY
     
    # The following parameter is useful only if you have the linpopup package
    # installed. The samba maintainer and the linpopup maintainer are
    # working to ease installation and configuration of linpopup and samba.
    ;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &
     
    # Domain Master specifies Samba to be the Domain Master Browser. If this
    # machine will be configured as a BDC (a secondary logon server), you
    # must set this to 'no'; otherwise, the default behavior is recommended.
    ;   domain master = auto
     
    # Some defaults for winbind (make sure you're not using the ranges
    # for something else.)
    ;   idmap uid = 10000-20000
    ;   idmap gid = 10000-20000
    ;   template shell = /bin/bash
    ;
    ; The following was the default behaviour in sarge
    ; but samba upstream reverted the default because it might induce
    ; performance issues in large organizations
    ; See #368251 for some of the consequences of *not* having
    ; this setting and smb.conf(5) for all details
    ;
    ;   winbind enum groups = yes
    ;   winbind enum users = yes
     
    #======================= Share Definitions =======================
     
    # Un-comment the following (and tweak the other settings below to suit)
    # to enable the default home directory shares.  This will share each
    # user's home directory as \\server\username
    ;[homes]
    ;   comment = Home Directories
    ;   browseable = no
     
    # By default, \\server\username shares can be connected to by anyone
    # with access to the samba server.  Un-comment the following parameter
    # to make sure that only "username" can connect to \\server\username
    # This might need tweaking when using external authentication schemes
    ;   valid users = %S
     
    # By default, the home directories are exported read-only. Change next
    # parameter to 'yes' if you want to be able to write to them.
    ;   writable = no
     
    # File creation mask is set to 0700 for security reasons. If you want to
    # create files with group=rw permissions, set next parameter to 0775.
    ;   create mask = 0700
     
    # Directory creation mask is set to 0700 for security reasons. If you want to
    # create dirs. with group=rw permissions, set next parameter to 0775.
    ;   directory mask = 0700
     
    # Un-comment the following and create the netlogon directory for Domain Logons
    # (you need to configure Samba to act as a domain controller too.)
    ;[netlogon]
    ;   comment = Network Logon Service
    ;   path = /home/samba/netlogon
    ;   guest ok = yes
    ;   writable = no
    ;   share modes = no
     
    # Un-comment the following and create the profiles directory to store
    # users profiles (see the "logon path" option above)
    # (you need to configure Samba to act as a domain controller too.)
    # The path below should be writable by all users so that their
    # profile directory may be created the first time they log on
    ;[profiles]
    ;   comment = Users profiles
    ;   path = /home/samba/profiles
    ;   guest ok = no
    ;   browseable = no
    ;   create mask = 0600
    ;   directory mask = 0700
     
    wins support = no
    [printers]
       comment = All Printers
       browseable = no
       path = /var/spool/samba
       printable = yes
       public = no
       writable = no
       create mode = 0700
     
    [LaserJet_M1005_MPC]
       path=/var/spool/cups/c00001
       printer name=c00001
       writable=yes
       public=no
       printable=yes
       available=yes
       browseable=yes
       read only=no
       hosts allow=192.168.0.1,192.168.0.2,192.168.0.3,192.168.0.4
     
    # Windows clients look for this share name as a source of downloadable
    # printer drivers
    [print$]
       comment = Printer Drivers
       path = /var/lib/samba/printers
       browseable = yes
       read only = yes
       guest ok = no
    # Uncomment to allow remote administration of Windows print drivers.
    # Replace 'ntadmin' with the name of the group your admin users are
    # members of.
    ;   write list = root, @ntadmin
     
    # A sample share for sharing your CD-ROM with others.
    ;[cdrom]
    ;   comment = Samba server's CD-ROM
    ;   writable = no
    ;   locking = no
    ;   path = /cdrom
    ;   public = yes
     
    # The next two parameters show how to auto-mount a CD-ROM when the
    #    cdrom share is accesed. For this to work /etc/fstab must contain
    #    an entry like this:
    #
    #       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
    #
    # The CD-ROM gets unmounted automatically after the connection to the
    #
    # If you don't want to use auto-mounting/unmounting make sure the CD
    #    is mounted on /cdrom
    #
    ;   preexec = /bin/mount /cdrom
    ;   postexec = /bin/umount /cdrom
     
     
    [Medias]
    path=/home/clement/Medias/
    comment=HDD 500 Go WD Médias
    available=yes
    #public=yes
    writable=yes
    #guest ok=yes
    read only=no
    hosts allow = 192.168.0.1, 192.168.0.2, 192.168.0.3, 192.168.0.4
    browsable = yes
    public = no
    je donne aussi mon /etc/cups/cupsd.conf à tout hasard ...

    Code : Sélectionner tout - Visualiser dans une fenêtre à part
    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16
    17
    18
    19
    20
    21
    22
    23
    24
    25
    26
    27
    28
    29
    30
    31
    32
    33
    34
    35
    36
    37
    38
    39
    40
    41
    42
    43
    44
    45
    46
    47
    48
    49
    50
    51
    52
    53
    54
    55
    56
    57
    58
    59
    60
    61
    62
    63
    64
    65
    66
    67
    68
    69
    70
    71
    72
    73
    74
    75
    76
    77
    78
    79
    80
    81
    82
    83
    84
    85
     
    #
    #
    #   Sample configuration file for the Common UNIX Printing System (CUPS)
    #   scheduler.  See "man cupsd.conf" for a complete description of this
    #   file.
    #
     
    # Log general information in error_log - change "info" to "debug" for
    # troubleshooting...
    LogLevel warning
     
    # Administrator user group...
    SystemGroup lpadmin
     
     
    # Only listen for connections from the local machine.
    Listen localhost:631
    Listen /var/run/cups/cups.sock
     
    # Show shared printers on the local network.
    Browsing Off
    BrowseOrder allow,deny
    BrowseAllow all
    BrowseAddress @LOCAL
     
    # Default authentication type, when authentication is required...
    DefaultAuthType Basic
     
    # Restrict access to the server...
    <Location />
      Order allow,deny
      Allow localhost
      Allow @LOCAL
    </Location>
     
    # Restrict access to the admin pages...
    <Location /admin>
      Order allow,deny
      Allow localhost
    </Location>
     
    # Restrict access to configuration files...
    <Location /admin/conf>
      AuthType Default
      Require user @SYSTEM
      Order allow,deny
      Allow localhost
    </Location>
     
    # Set the default printer/job policies...
    <Policy default>
      # Job-related operations must be done by the owner or an administrator...
      <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job>
        Require user @OWNER @SYSTEM
        Order deny,allow
      </Limit>
     
      # All administration operations require an administrator to authenticate...
      <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
        AuthType Default
        Require user @SYSTEM
        Order deny,allow
      </Limit>
     
      # All printer operations require a printer operator to authenticate...
      <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs>
        AuthType Default
        Require user @SYSTEM
        Order deny,allow
      </Limit>
     
      # Only the owner or an administrator can cancel or authenticate a job...
      <Limit Cancel-Job CUPS-Authenticate-Job>
        Require user @OWNER @SYSTEM
        Order deny,allow
      </Limit>
     
      <Limit All>
        Order deny,allow
      </Limit>
    </Policy>
     
    #
    #
    Je vois bien mon imprimante (qui porte le nom que je lui ai donné à savoir LaserJet_M1005_MPC) sous windows. Mais une fois le driver (CD fourni avec l'imprimante) installé sur la machine je peux ouvrir la file d'impression, et le titre de la fenêtre est "LaserJet_M1005_MPC sur Linux Accès refusé. Connexion impossible".

    Voila j'éspère avoir été assez clair, avoir mis mon sujet dans la bonne catégorie, et avoir donné assez d'information. Je vous remercie d'avance, et reste a disposition pour tout info supplémentaire dont vous auriez besoin...
    Boubamagik.

  2. #2
    Nouveau Candidat au Club
    Homme Profil pro
    Architecte technique
    Inscrit en
    mars 2017
    Messages
    1
    Détails du profil
    Informations personnelles :
    Sexe : Homme
    Localisation : France, Rhône (Rhône Alpes)

    Informations professionnelles :
    Activité : Architecte technique

    Informations forums :
    Inscription : mars 2017
    Messages : 1
    Points : 1
    Points
    1

    Par défaut

    Citation Envoyé par Givemefive Voir le message
    Bonjour,
    J'ai plusieurs ordinateur. Un serveur principal sous Ubuntu 7.10 Gutsy Gibbon, 2 ordinateurs sous windows XP Pro, et un apple sous MacOs Leopard. J'utilise Samba pour partager des fichiers et cela marche très bien. Mes données sont sur un disque externe sur mon serveur Ubuntu et visibles sous Windows et MacOS grâce à Samba. Je viens d'acheter une imprimante HP LaserJet M1005 driver . J'utilise le driver foo2xqx qui fonctionne correctement. J'arrive à utiliser l'imprimante depuis le serveur Ubuntu. La où cela commence à se gâter c'est donc pour le partage de l'imprimante avec Samba. J'ai lu ici et la qu'il était peut être possible de ne pas utiliser Samba et d'utiliser directement CUPS... Est ce vrai ?

    J'ai donc utilisé Samba car j'ai plus ou moins compris comment cela marchait avec des répertoires alors pourquoi pas une imprimante...

    Mon répertoire /var/spool/cups/ contient un fichier c00001 -> est ce mon imprimante ? J'ai considéré que c'était le cas ... Du coup j'ai configuré mon /etc/samba/smb.conf comme suit (j'ai rajouté les lignes de [LaserJet_M1005_MPC] à hosts allow : ... ). Les dernières lignes à partir de [Medias] sont les lignes qui font fonctionner mon partage de fichier (si il y a une erreur merci de me le signaler aussi, mais en tout cas ça marche très bien) :

    Code : Sélectionner tout - Visualiser dans une fenêtre à part
    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16
    17
    18
    19
    20
    21
    22
    23
    24
    25
    26
    27
    28
    29
    30
    31
    32
    33
    34
    35
    36
    37
    38
    39
    40
    41
    42
    43
    44
    45
    46
    47
    48
    49
    50
    51
    52
    53
    54
    55
    56
    57
    58
    59
    60
    61
    62
    63
    64
    65
    66
    67
    68
    69
    70
    71
    72
    73
    74
    75
    76
    77
    78
    79
    80
    81
    82
    83
    84
    85
    86
    87
    88
    89
    90
    91
    92
    93
    94
    95
    96
    97
    98
    99
    100
    101
    102
    103
    104
    105
    106
    107
    108
    109
    110
    111
    112
    113
    114
    115
    116
    117
    118
    119
    120
    121
    122
    123
    124
    125
    126
    127
    128
    129
    130
    131
    132
    133
    134
    135
    136
    137
    138
    139
    140
    141
    142
    143
    144
    145
    146
    147
    148
    149
    150
    151
    152
    153
    154
    155
    156
    157
    158
    159
    160
    161
    162
    163
    164
    165
    166
    167
    168
    169
    170
    171
    172
    173
    174
    175
    176
    177
    178
    179
    180
    181
    182
    183
    184
    185
    186
    187
    188
    189
    190
    191
    192
    193
    194
    195
    196
    197
    198
    199
    200
    201
    202
    203
    204
    205
    206
    207
    208
    209
    210
    211
    212
    213
    214
    215
    216
    217
    218
    219
    220
    221
    222
    223
    224
    225
    226
    227
    228
    229
    230
    231
    232
    233
    234
    235
    236
    237
    238
    239
    240
    241
    242
    243
    244
    245
    246
    247
    248
    249
    250
    251
    252
    253
    254
    255
    256
    257
    258
    259
    260
    261
    262
    263
    264
    265
    266
    267
    268
    269
    270
    271
    272
    273
    274
    275
    276
    277
    278
    279
    280
    281
    282
    283
    284
    285
    286
    287
    288
    289
    290
    291
    292
    293
    294
    295
    296
    297
    298
    299
    300
    301
    302
    303
    304
    305
    306
    307
    308
    309
    310
    311
    312
    313
    314
    315
    316
    317
    318
    319
    320
    321
    322
    323
    324
    325
    326
    327
    328
    329
    330
    331
    332
    333
    334
     
    #
    # Sample configuration file for the Samba suite for Debian GNU/Linux.
    #
    #
    # This is the main Samba configuration file. You should read the
    # smb.conf(5) manual page in order to understand the options listed
    # here. Samba has a huge number of configurable options most of which 
    # are not shown in this example
    #
    # Any line which starts with a ; (semi-colon) or a # (hash) 
    # is a comment and is ignored. In this example we will use a #
    # for commentary and a ; for parts of the config file that you
    # may wish to enable
    #
    # NOTE: Whenever you modify this file you should run the command
    # "testparm" to check that you have not made any basic syntactic 
    # errors. 
    #
     
    #======================= Global Settings =======================
     
    [global]
     
    ## Browsing/Identification ###
     
    # Change this to the workgroup/NT-domain name your Samba server will part of
       workgroup = MSHOME
     
    # server string is the equivalent of the NT Description field
       server string = %h
     
    # Windows Internet Name Serving Support Section:
    # WINS Support - Tells the NMBD component of Samba to enable its WINS Server
    ;   wins support = no
     
    # WINS Server - Tells the NMBD components of Samba to be a WINS Client
    # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
    ;   wins server = w.x.y.z
     
    # This will prevent nmbd to search for NetBIOS names through DNS.
       dns proxy = no
     
    # What naming service and in what order should we use to resolve host names
    # to IP addresses
    ;   name resolve order = lmhosts host wins bcast
     
    #### Networking ####
     
    # The specific set of interfaces / networks to bind to
    # This can be either the interface name or an IP address/netmask;
    # interface names are normally preferred
    ;   interfaces = 127.0.0.0/8 eth0
     
    # Only bind to the named interfaces and/or networks; you must use the
    # 'interfaces' option above to use this.
    # It is recommended that you enable this feature if your Samba machine is
    # not protected by a firewall or is a firewall itself.  However, this
    # option cannot handle dynamic or non-broadcast interfaces correctly.
    ;   bind interfaces only = true
     
     
     
    #### Debugging/Accounting ####
     
    # This tells Samba to use a separate log file for each machine
    # that connects
       log file = /var/log/samba/log.%m
     
    # Put a capping on the size of the log files (in Kb).
       max log size = 1000
     
    # If you want Samba to only log through syslog then set the following
    # parameter to 'yes'.
    ;   syslog only = no
     
    # We want Samba to log a minimum amount of information to syslog. Everything
    # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
    # through syslog you should set the following parameter to something higher.
       syslog = 0
     
    # Do something sensible when Samba crashes: mail the admin a backtrace
       panic action = /usr/share/samba/panic-action %d
     
     
    ####### Authentication #######
     
    # "security = user" is always a good idea. This will require a Unix account
    # in this server for every user accessing the server. See
    # /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
    # in the samba-doc package for details.
      security = user
     
    # You may wish to use password encryption.  See the section on
    # 'encrypt passwords' in the smb.conf(5) manpage before enabling.
       encrypt passwords = true
     
    # If you are using encrypted passwords, Samba will need to know what
    # password database type you are using.  
       passdb backend = tdbsam
     
       obey pam restrictions = yes
     
    ;   guest account = nobody
       invalid users = root
     
    # This boolean parameter controls whether Samba attempts to sync the Unix
    # password with the SMB password when the encrypted SMB password in the
    # passdb is changed.
    ;   unix password sync = no
     
    # For Unix password sync to work on a Debian GNU/Linux system, the following
    # parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
    # sending the correct chat script for the passwd program in Debian Sarge).
       passwd program = /usr/bin/passwd %u
       passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n *passwd:*password\supdated\ssuccessfully* .
     
    # This boolean controls whether PAM will be used for password changes
    # when requested by an SMB client instead of the program listed in
    # 'passwd program'. The default is 'no'.
    ;   pam password change = no
     
    ########## Domains ###########
     
    # Is this machine able to authenticate users. Both PDC and BDC
    # must have this setting enabled. If you are the BDC you must
    # change the 'domain master' setting to no
    #
    ;   domain logons = yes
    #
    # The following setting only takes effect if 'domain logons' is set
    # It specifies the location of the user's profile directory
    # from the client point of view)
    # The following required a [profiles] share to be setup on the
    # samba server (see below)
    ;   logon path = \\%N\profiles\%U
    # Another common choice is storing the profile in the user's home directory
    ;   logon path = \\%N\%U\profile
     
    # The following setting only takes effect if 'domain logons' is set
    # It specifies the location of a user's home directory (from the client
    # point of view)
    ;   logon drive = H:
    ;   logon home = \\%N\%U
     
    # The following setting only takes effect if 'domain logons' is set
    # It specifies the script to run during logon. The script must be stored
    # in the [netlogon] share
    # NOTE: Must be store in 'DOS' file format convention
    ;   logon script = logon.cmd
     
    # This allows Unix users to be created on the domain controller via the SAMR
    # RPC pipe.  The example command creates a user account with a disabled Unix
    # password; please adapt to your needs
    ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
     
    ########## Printing ##########
     
    # If you want to automatically load your printer list rather
    # than setting them up individually then you'll need this
    ;   load printers = yes
     
    # lpr(ng) printing. You may wish to override the location of the
    # printcap file
    ;   printing = bsd
    ;   printcap name = /etc/cups/printers.conf
     
    # CUPS printing.  See also the cupsaddsmb(8) manpage in the
    # cupsys-client package.
    ;   printing = cups
    ;   printcap name = cups
     
    # When using [print$], root is implicitly a 'printer admin', but you can
    # also give this right to other users to add drivers and set printer
    # properties
    ;   printer admin = @lpadmin
     
     
    ############ Misc ############
     
    # Using the following line enables you to customise your configuration
    # on a per machine basis. The %m gets replaced with the netbios name
    # of the machine that is connecting
    ;   include = /home/samba/etc/smb.conf.%m
     
    # Most people will find that this option gives better performance.
    # See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
    # for details
    # You may want to add the following on a Linux system:
    #         SO_RCVBUF=8192 SO_SNDBUF=8192
       socket options = TCP_NODELAY
     
    # The following parameter is useful only if you have the linpopup package
    # installed. The samba maintainer and the linpopup maintainer are
    # working to ease installation and configuration of linpopup and samba.
    ;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &
     
    # Domain Master specifies Samba to be the Domain Master Browser. If this
    # machine will be configured as a BDC (a secondary logon server), you
    # must set this to 'no'; otherwise, the default behavior is recommended.
    ;   domain master = auto
     
    # Some defaults for winbind (make sure you're not using the ranges
    # for something else.)
    ;   idmap uid = 10000-20000
    ;   idmap gid = 10000-20000
    ;   template shell = /bin/bash
    ;
    ; The following was the default behaviour in sarge
    ; but samba upstream reverted the default because it might induce
    ; performance issues in large organizations
    ; See #368251 for some of the consequences of *not* having
    ; this setting and smb.conf(5) for all details
    ;
    ;   winbind enum groups = yes
    ;   winbind enum users = yes
     
    #======================= Share Definitions =======================
     
    # Un-comment the following (and tweak the other settings below to suit)
    # to enable the default home directory shares.  This will share each
    # user's home directory as \\server\username
    ;[homes]
    ;   comment = Home Directories
    ;   browseable = no
     
    # By default, \\server\username shares can be connected to by anyone
    # with access to the samba server.  Un-comment the following parameter
    # to make sure that only "username" can connect to \\server\username
    # This might need tweaking when using external authentication schemes
    ;   valid users = %S
     
    # By default, the home directories are exported read-only. Change next
    # parameter to 'yes' if you want to be able to write to them.
    ;   writable = no
     
    # File creation mask is set to 0700 for security reasons. If you want to
    # create files with group=rw permissions, set next parameter to 0775.
    ;   create mask = 0700
     
    # Directory creation mask is set to 0700 for security reasons. If you want to
    # create dirs. with group=rw permissions, set next parameter to 0775.
    ;   directory mask = 0700
     
    # Un-comment the following and create the netlogon directory for Domain Logons
    # (you need to configure Samba to act as a domain controller too.)
    ;[netlogon]
    ;   comment = Network Logon Service
    ;   path = /home/samba/netlogon
    ;   guest ok = yes
    ;   writable = no
    ;   share modes = no
     
    # Un-comment the following and create the profiles directory to store
    # users profiles (see the "logon path" option above)
    # (you need to configure Samba to act as a domain controller too.)
    # The path below should be writable by all users so that their
    # profile directory may be created the first time they log on
    ;[profiles]
    ;   comment = Users profiles
    ;   path = /home/samba/profiles
    ;   guest ok = no
    ;   browseable = no
    ;   create mask = 0600
    ;   directory mask = 0700
     
    wins support = no
    [printers]
       comment = All Printers
       browseable = no
       path = /var/spool/samba
       printable = yes
       public = no
       writable = no
       create mode = 0700
     
    [LaserJet_M1005_MPC]
       path=/var/spool/cups/c00001
       printer name=c00001
       writable=yes
       public=no
       printable=yes
       available=yes
       browseable=yes
       read only=no
       hosts allow=192.168.0.1,192.168.0.2,192.168.0.3,192.168.0.4
     
    # Windows clients look for this share name as a source of downloadable
    # printer drivers
    [print$]
       comment = Printer Drivers
       path = /var/lib/samba/printers
       browseable = yes
       read only = yes
       guest ok = no
    # Uncomment to allow remote administration of Windows print drivers.
    # Replace 'ntadmin' with the name of the group your admin users are
    # members of.
    ;   write list = root, @ntadmin
     
    # A sample share for sharing your CD-ROM with others.
    ;[cdrom]
    ;   comment = Samba server's CD-ROM
    ;   writable = no
    ;   locking = no
    ;   path = /cdrom
    ;   public = yes
     
    # The next two parameters show how to auto-mount a CD-ROM when the
    #    cdrom share is accesed. For this to work /etc/fstab must contain
    #    an entry like this:
    #
    #       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
    #
    # The CD-ROM gets unmounted automatically after the connection to the
    #
    # If you don't want to use auto-mounting/unmounting make sure the CD
    #    is mounted on /cdrom
    #
    ;   preexec = /bin/mount /cdrom
    ;   postexec = /bin/umount /cdrom
     
     
    [Medias]
    path=/home/clement/Medias/
    comment=HDD 500 Go WD Médias
    available=yes
    #public=yes
    writable=yes
    #guest ok=yes
    read only=no
    hosts allow = 192.168.0.1, 192.168.0.2, 192.168.0.3, 192.168.0.4
    browsable = yes
    public = no
    je donne aussi mon /etc/cups/cupsd.conf à tout hasard ...

    Code : Sélectionner tout - Visualiser dans une fenêtre à part
    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16
    17
    18
    19
    20
    21
    22
    23
    24
    25
    26
    27
    28
    29
    30
    31
    32
    33
    34
    35
    36
    37
    38
    39
    40
    41
    42
    43
    44
    45
    46
    47
    48
    49
    50
    51
    52
    53
    54
    55
    56
    57
    58
    59
    60
    61
    62
    63
    64
    65
    66
    67
    68
    69
    70
    71
    72
    73
    74
    75
    76
    77
    78
    79
    80
    81
    82
    83
    84
    85
     
    #
    #
    #   Sample configuration file for the Common UNIX Printing System (CUPS)
    #   scheduler.  See "man cupsd.conf" for a complete description of this
    #   file.
    #
     
    # Log general information in error_log - change "info" to "debug" for
    # troubleshooting...
    LogLevel warning
     
    # Administrator user group...
    SystemGroup lpadmin
     
     
    # Only listen for connections from the local machine.
    Listen localhost:631
    Listen /var/run/cups/cups.sock
     
    # Show shared printers on the local network.
    Browsing Off
    BrowseOrder allow,deny
    BrowseAllow all
    BrowseAddress @LOCAL
     
    # Default authentication type, when authentication is required...
    DefaultAuthType Basic
     
    # Restrict access to the server...
    <Location />
      Order allow,deny
      Allow localhost
      Allow @LOCAL
    </Location>
     
    # Restrict access to the admin pages...
    <Location /admin>
      Order allow,deny
      Allow localhost
    </Location>
     
    # Restrict access to configuration files...
    <Location /admin/conf>
      AuthType Default
      Require user @SYSTEM
      Order allow,deny
      Allow localhost
    </Location>
     
    # Set the default printer/job policies...
    <Policy default>
      # Job-related operations must be done by the owner or an administrator...
      <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job>
        Require user @OWNER @SYSTEM
        Order deny,allow
      </Limit>
     
      # All administration operations require an administrator to authenticate...
      <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
        AuthType Default
        Require user @SYSTEM
        Order deny,allow
      </Limit>
     
      # All printer operations require a printer operator to authenticate...
      <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs>
        AuthType Default
        Require user @SYSTEM
        Order deny,allow
      </Limit>
     
      # Only the owner or an administrator can cancel or authenticate a job...
      <Limit Cancel-Job CUPS-Authenticate-Job>
        Require user @OWNER @SYSTEM
        Order deny,allow
      </Limit>
     
      <Limit All>
        Order deny,allow
      </Limit>
    </Policy>
     
    #
    #
    Je vois bien mon imprimante (qui porte le nom que je lui ai donné à savoir LaserJet_M1005_MPC) sous windows. Mais une fois le driver (CD fourni avec l'imprimante) installé sur la machine je peux ouvrir la file d'impression, et le titre de la fenêtre est "LaserJet_M1005_MPC sur Linux Accès refusé. Connexion impossible".

    Voila j'éspère avoir été assez clair, avoir mis mon sujet dans la bonne catégorie, et avoir donné assez d'information. Je vous remercie d'avance, et reste a disposition pour tout info supplémentaire dont vous auriez besoin...
    Boubamagik.

    Les derniers vershions il n'y a aucun problème à installer cette imprimante mettre à jour le OS il va résoudre le problème
    J'espère que cette aide

Discussions similaires

  1. Problème dossier partagé et samba
    Par runner77 dans le forum Administration
    Réponses: 5
    Dernier message: 18/07/2013, 11h09
  2. [WS 2008 R2] Problème partage imprimante
    Par maxlpn dans le forum Windows Serveur
    Réponses: 0
    Dernier message: 12/11/2010, 12h50
  3. Problème partage publique Samba
    Par McAdam dans le forum Administration système
    Réponses: 0
    Dernier message: 23/10/2009, 21h47
  4. [debian etch][samba] Partage imprimante avec windows xp
    Par liquideshark dans le forum Debian
    Réponses: 1
    Dernier message: 21/05/2007, 01h44
  5. Réponses: 11
    Dernier message: 09/02/2007, 10h21

Partager

Partager
  • Envoyer la discussion sur Viadeo
  • Envoyer la discussion sur Twitter
  • Envoyer la discussion sur Google
  • Envoyer la discussion sur Facebook
  • Envoyer la discussion sur Digg
  • Envoyer la discussion sur Delicious
  • Envoyer la discussion sur MySpace
  • Envoyer la discussion sur Yahoo