[OPENSERVER] Problème à l'installation d'une imprimante HP P2015
Bonjour
j'ai déja installé plusieurs hp laser 22OO en utilisant les lignes de comandes ci-après mais j'ai un souci avec la hp P2015 dn est-ce que quelqu'un peut m'aider car je suis vraiment nul de ce coté
UNIX OPENSERVER 5
+---------------------------- SCOadmin on scosysv -----------------------------+
¦+----------------------------------------------------------------------------+¦
¦¦ File View Options Help ¦¦
¦+----------------------------------------------------------------------------+¦
¦+----------------------------------------------------------------------------+¦
¦¦ HP Network Print Services Manager ^¦¦
¦¦* HP Network Printer Manager *¦¦
¦¦ Print Job Manager *¦¦
¦¦ Printer Manager *¦¦
¦¦ *¦¦
"Dans la commande scoadmin j'ai selectionné HP Network Printer Manager"
HP NETWORK PRINTER CONFIGURATION TASKS
MAIN MENU
1) Verify installation of software
2) Configure a printer with BOOTP/TFTP
3) Verify BOOTP/TFTP configuration
4) Verify network printer connectivity
5) Verify network printer operation
6) Add printer to spooler
7) Remove printer BOOTP/TFTP configuration
8) Remove printer from spooler
?) Help q) Quit
Please enter selection: 2
You will be asked a series of questions. After all of the questions have
been answered, the answers are used to create an /etc/bootptab entry. If
necessary, a configuration file is created for configurable parameters
not provided by BOOTP. This configuration file is retrieved by the
network printer with TFTP after receiving the BOOTP response.
IP addresses are stored in both /etc/bootptab and the configuration file.
You can supply a hostname as an answer to certain questions and the
IP address will be looked up for you. You will be asked to confirm the
the address found or to choose one of a list of addresses found.
These responses apply to all questions:
"q" - returns you to the main menu
"?" - prints help text
<return> - skips optional parameters or selects default value
If you make a mistake on one of the questions, complete the configuration
and manually edit /etc/bootptab or the configuration file (to be named
at the end of the configuration) to correct the mistake. Entering "q"
quits the configuration and causes all of your answers to be lost.
Press the return key to continue ...
Enter peripheral's LAN hardware address: 001a4b1a071c
Enter the network peripheral name: laser2
Enter IP address (default=192.168.1.136):
Enter subnet mask using dot notation (optional):
Enter default gateway name or address (optional):
Enter syslog server name or address (optional):
Enter idle timeout in seconds (default=90):
Do you want to limit printer access to certain hosts or
networks of hosts with an access list? (y/n/q default=n):
Do you want to configure SNMP related parameters? (y/n/q default=n):
sco
--------------------------------------------------------------
Adding the following BOOTP entry to /etc/bootptab:
laser2:\
:ht=ether:\
:ha=001a4b1a071c:\
:hn:\
:ip=192.168.1.136:\
:vm=rfc1048:
--------------------------------------------------------------
The printer BOOTP/TFTP configuration is complete. Complete menu
item 3 to test the BOOTP/TFTP configuration before powering on your
printer.
Press the return key to continue ...
HP NETWORK PRINTER CONFIGURATION TASKS
MAIN MENU
1) Verify installation of software
2) Configure a printer with BOOTP/TFTP
3) Verify BOOTP/TFTP configuration
4) Verify network printer connectivity
5) Verify network printer operation
6) Add printer to spooler
7) Remove printer BOOTP/TFTP configuration
8) Remove printer from spooler
?) Help q) Quit
Please enter selection: 6
Enter the lp spooler destination name (default=laser2):
Enter the network peripheral name (default=laser2):
Enter model script name: ('*' to see choices ) *
1640 HPDeskJet500 epson network qume1155
5310 HPDeskJetPlus f450 network.ps standard
DECColormatePS HPLaserJet hp ph.daps ti800
DEClaser1150 crnlmap hpplotter postscript
DEClaser2150 dqp10 laserjetIIIsi pprx
DEClaser2250 dumb laserjethpnp proprinter
DEClaser3250 emulator lqp40 prx
Enter model script name: ('*' to see choices ) laserjethpnp
Enter the spooler class for the peripheral to join (optional):
Will this be the default printer? (y/n/q default=n) y
Ready to shut down the spooling system, configure the new destination,
and start the spooling system again. When the spooling system is shut
down all printing will stop. Any print requests that are currently
printing will be reprinted in their entirety when the spooling system
is restarted.
OK to continue? (y/n/q default=y)
/usr/lib/lpshut
Print services stopped.
/usr/lib/lpadmin -plaser2 -v/dev/null -mlaserjethpnp
/usr/lib/lpadmin -dlaser2
cp /usr/spool/lp/admins/lp/interfaces/laser2 /usr/spool/lp/admins/lp/interfaces/
model.orig/laser2
chown bin /usr/spool/lp/admins/lp/interfaces/model.orig/laser2
chgrp lp /usr/spool/lp/admins/lp/interfaces/model.orig/laser2
chmod 775 /usr/spool/lp/admins/lp/interfaces/model.orig/laser2
cp /usr/lib/hpnp/hpnp.model /usr/spool/lp/admins/lp/interfaces/laser2
chown bin /usr/spool/lp/admins/lp/interfaces/laser2
chgrp lp /usr/spool/lp/admins/lp/interfaces/laser2
chmod 775 /usr/spool/lp/admins/lp/interfaces/laser2
/usr/lib/lpsched
Print services started.
/usr/lib/accept laser2
destination "laser2" now accepting requests
/usr/bin/enable laser2
printer "laser2" now enabled
The spooler destination laser2 has been added to the spooler.
Press the return key to continue ...
HP NETWORK PRINTER CONFIGURATION TASKS
MAIN MENU
1) Verify installation of software
2) Configure a printer with BOOTP/TFTP
3) Verify BOOTP/TFTP configuration
4) Verify network printer connectivity
5) Verify network printer operation
6) Add printer to spooler
7) Remove printer BOOTP/TFTP configuration
8) Remove printer from spooler
?) Help q) Quit
Please enter selection: 4
Enter the network peripheral name or IP address (default=laser2):
=========================================================
Testing network connectivity to laser2 ....
ping -c 5 laser2
PING laser2 (192.168.1.136): 56 data bytes
64 bytes from laser2 (192.168.1.136): icmp_seq=0 ttl=255 time=0.392 ms
64 bytes from laser2 (192.168.1.136): icmp_seq=1 ttl=255 time=0.325 ms
64 bytes from laser2 (192.168.1.136): icmp_seq=2 ttl=255 time=0.318 ms
64 bytes from laser2 (192.168.1.136): icmp_seq=3 ttl=255 time=0.328 ms
64 bytes from laser2 (192.168.1.136): icmp_seq=4 ttl=255 time=0.324 ms
--- laser2 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 0.318/0.337/0.392 ms
laser2 passed the network connectivity test
=========================================================
The printer network connectivity test is complete.
Press the return key to continue ...
HP NETWORK PRINTER CONFIGURATION TASKS
MAIN MENU
1) Verify installation of software
2) Configure a printer with BOOTP/TFTP
3) Verify BOOTP/TFTP configuration
4) Verify network printer connectivity
5) Verify network printer operation
6) Add printer to spooler
7) Remove printer BOOTP/TFTP configuration
8) Remove printer from spooler
?) Help q) Quit
Please enter selection: 5
Enter the network peripheral name or IP address (default=laser2):
The following types of test files can be sent to the printer:
1) text file
2) PostScript file
3) HP-GL/2 file
Which type of file should be sent? (1/2/3 default=1)
===============================================================
Checking that scosysv.datazur.fr is on the printer's access list ...
/usr/lib/hpnp/cfg/canaccess laser2
Printer access test failed. Add scosysv.datazur.fr to the
printer's access list before continuing.
===============================================================
The network printer operation test is complete.
Press the return key to continue ...
J'ai effectué cette installation avec une hp P2015 dn.
Il y a trois ans j'avais effectué l'installation d'une hp 2200 dn
et je n'avais pas rencontré de difficultés , voici le test 5
HP NETWORK PRINTER CONFIGURATION TASKS
MAIN MENU
1) Verify installation of software
2) Configure a printer with BOOTP/TFTP
3) Verify BOOTP/TFTP configuration
4) Verify network printer connectivity
5) Verify network printer operation
6) Add printer to spooler
7) Remove printer BOOTP/TFTP configuration
8) Remove printer from spooler
?) Help q) Quit
lease enter selection: 5
nter the network peripheral name or IP address (default=laser2): laser
he following types of test files can be sent to the printer:
1) text file
2) PostScript file
3) HP-GL/2 file
hich type of file should be sent? (1/2/3 default=1)
==============================================================
hecking that scosysv.datazur.fr is on the printer's access list ...
usr/lib/hpnp/cfg/canaccess laser
ending a test file to laser ...
usr/lib/hpnp/hpnpf -n -v -R -x laser /usr/lib/hpnp/testfiles/text
onnecting to laser ... connected
ending file /usr/lib/hpnp/testfiles/text
he file was successfully sent to laser.
==============================================================
he network printer operation test is complete.
ress the return key to continue ...
MERCI D'AVANCE POUR VOTRE REPONSE
Répondre avec citation
Partager