Bonjour,
j'ai une machine virtuelle qui contient ubuntu
et je veux ajouter un port serie dans cette machine virtuelle
donc dans la configuration de cette machine virtuelle j'ai choisie ADD -->serial port -->next-->OK
mais dans physical serial port je trouve juste auto detected et non pas COM1 par exemple
et lors de démarrage de cette machine cette erreur est affichée : virtuelle device serial0 will start disconnected
donc le port serie n'est pas reconnu :
et pour être sur j'ai branché un modem et je test cette commande wvdialconf
et j'ai comme réponse aucun modem détecté
pourtant j'arrive à faire le même travail dans un PC bureau et pour le moment j'ai utilisé PC portable ( hp i5)
Code : Sélectionner tout - Visualiser dans une fenêtre à part
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21 root@ubuntu:~# wvdialconf Editing `/etc/wvdial.conf'. Scanning your serial ports for a modem. ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. Modem Port Scan<*1>: S2 S3 Sorry, no modem was detected! Is it in use by another program? Did you configure it properly with setserial? Please read the FAQ at http://open.nit.ca/wiki/?WvDial If you still have problems, send mail to <wvdial-list@lists.nit.ca>. root@ubuntu:~#
merci d'avance
Partager