[Disque Dur] disque dur hs

[michael59]

Bonjour tout le monde

J'ai un portable asus X50vl, mon disque dur semble être hs c'est un ST9160821AS (seagate).
http://www.ldlc.com/fiche/PB00056719.html.

Ma question est la suivante, j'habite a 3 kms de grobill, donc normale, pour ce genre de pièce je me fourni la bas. Seulement voila, je ne sais pas si je dois prendre du sata ou du SataII sachant que de toute façon la capacité actuel de ce disque ne me convient plus et que je souhaite passé entre 300 et 500 GO.

Est ce que quelqu'un pourrait me renseigner sur ce sujet.

Merci

[lakitrid]

La différence de prix entre un disque dur Sata 1 et 2 ne doit pas être bien grande et les deux sont compatibles. Donc tu peux prendre l'un ou l'autre.

[michael59]

Merci Pour ta réponse, ma question était plus en rapport avec la compatibilité qu'avec le prix sinon je me permet de poster le rapport de smartctl

smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 5400.3
Device Model: ST9160821AS
Serial Number: 5MA7APQG
Firmware Version: 3.ALC
User Capacity: 160 041 885 696 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Wed Jul 8 10:51:01 2009 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 426) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 111) minutes.
SCT capabilities: (0x0001) SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 119 093 006 Pre-fail Always - 233152128
3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1722
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 066 057 030 Pre-fail Always - 167636986077
9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 3225
10 Spin_Retry_Count 0x0013 100 100 034 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1690
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 098 098 000 Old_age Always - 2
190 Airflow_Temperature_Cel 0x0022 044 031 045 Old_age Always FAILING_NOW 56 (104 4 56 46)
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 858
193 Load_Cycle_Count 0x0032 049 049 000 Old_age Always - 102382
194 Temperature_Celsius 0x0022 056 069 000 Old_age Always - 56 (0 16 0 0)
195 Hardware_ECC_Recovered 0x001a 068 057 000 Old_age Always - 24220621
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Si vous pouvez m'aider a interpréter les resultats

Ps désolé de n'avoir pu vous remercier plus tot.