Publicité
+ Répondre à la discussion
Affichage des résultats 1 à 3 sur 3
  1. #1
    Membre confirmé Avatar de fantomas261
    Inscrit en
    avril 2007
    Messages
    487
    Détails du profil
    Informations forums :
    Inscription : avril 2007
    Messages : 487
    Points : 231
    Points
    231

    Par défaut installer driver cle usb sans passer par le root

    bonjour,
    je voudrais savoir comment installer un driver pour utiliser la cle usb lexar jumpdrive sans passer par le root
    merci

  2. #2
    Membre habitué
    Inscrit en
    mai 2004
    Messages
    114
    Détails du profil
    Informations forums :
    Inscription : mai 2004
    Messages : 114
    Points : 115
    Points
    115

    Par défaut

    hum ??? un driver pour une clé usb sous linux ?

    Que dit la commande dmesg après insertion de la clé dans un port usb ?

    Cordialement,

    Emmanuel

  3. #3
    Membre confirmé Avatar de fantomas261
    Inscrit en
    avril 2007
    Messages
    487
    Détails du profil
    Informations forums :
    Inscription : avril 2007
    Messages : 487
    Points : 231
    Points
    231

    Par défaut

    Code :
    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16
    17
    18
    19
    20
    21
    22
    23
    24
    25
    26
    27
    28
    29
    30
    31
    32
    33
    34
    35
    36
    37
    38
    39
    40
    41
    42
    43
    44
    45
    46
    47
    48
    49
    50
    51
    52
    53
    54
    55
    56
    57
    58
    59
    60
    61
    62
    63
    64
    65
    66
    67
    68
    69
    70
    71
    72
    73
    74
    75
    76
    77
    78
    79
    80
    81
    82
    83
    84
    85
    86
    87
    88
    89
    90
    91
    92
    93
    94
    95
    96
    97
    98
    99
    100
    101
    102
    103
    104
    105
    106
    107
    108
    109
    110
    111
    112
    113
    114
    115
    116
    117
    118
    119
    120
    121
    122
    123
    124
    125
    126
    127
    128
    129
    130
    131
    132
    133
    134
    135
    136
    137
    138
    139
    140
    141
    142
    143
    144
    145
    146
    147
    148
    149
    150
    151
    152
    153
    154
    155
    156
    157
    158
    159
    160
    161
    162
    163
    164
    165
    166
    167
    168
    169
    170
    171
    172
    173
    174
    175
    176
    177
    178
    179
    180
    181
    182
    183
    184
    185
    186
    187
    188
    189
    190
    191
    192
    193
    194
    195
    196
    197
    198
    199
    200
    201
    202
    203
    204
    205
    206
    207
    208
    209
    210
    211
    212
    213
    214
    215
    216
    217
    218
    219
    220
    221
    222
    223
    224
    225
    226
    227
    228
    229
    230
    231
    232
    233
    234
    235
    236
    237
    238
    239
    240
    241
    242
    243
    244
    245
    246
    247
    248
    249
    250
    251
    252
    253
    254
    255
    256
    257
    258
    259
    260
    261
    262
    263
    264
    265
    266
    267
    268
    269
    270
    271
    272
    273
    274
    275
    276
    277
    278
    279
    280
    281
    282
    283
    284
    285
    286
    287
    288
    289
    290
    291
    292
    293
    294
    295
    296
    297
    298
    299
    300
    301
    302
    303
    304
    305
    306
    307
    308
    309
    310
    311
    312
    313
    314
    315
    316
    317
    318
    319
    320
    321
    322
    323
    324
    325
    326
    327
    328
    329
    330
    331
    332
    333
    334
    335
    336
    337
    338
    339
    340
    341
    342
    343
    344
    345
    346
    347
    348
    349
    350
    351
    352
    353
    354
    355
    356
    357
    358
    359
    360
    361
    362
    363
    364
    365
    366
    367
    368
    369
    370
    371
    372
    373
    374
    375
    376
    377
    378
    379
    380
    381
    382
    383
    384
    385
    386
    387
    388
    389
    390
    391
    392
    393
    394
    395
    396
    397
    398
    399
    400
    401
    402
    403
    404
    405
    406
    407
    408
    409
    410
    411
    412
    413
    414
    415
    416
    417
    418
    419
    420
    421
    422
    423
    424
    425
    426
    427
    428
    429
    430
    431
    432
    433
    434
    435
    436
    437
    438
    439
    440
    441
    442
    443
    444
    445
    446
    447
    448
    449
    450
    451
    452
    453
    454
    455
    456
    457
    458
    459
    460
    461
    462
     
    bash-3.00$ dmesg
    Linux version 2.6.9-55.0.12.ELsmp (brewbuilder@hs20-bc1-6.build.redhat.com) (gcc  version 3.4.6 20060404 (Red Hat 3.4.6-8)) #1 SMP Wed Oct 17 08:19:30 EDT 2007
    BIOS-provided physical RAM map:
     BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
     BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
     BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
     BIOS-e820: 0000000000100000 - 00000000dfff3000 (usable)
     BIOS-e820: 00000000dfff3000 - 00000000dfffb000 (ACPI data)
     BIOS-e820: 00000000dfffb000 - 00000000e0000000 (reserved)
     BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
     BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
     BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
     BIOS-e820: 0000000100000000 - 000000021bfff000 (usable)
    7743MB HIGHMEM available.
    896MB LOWMEM available.
    found SMP MP-table at 000f4fa0
    Using x86 segment limits to approximate NX protection
    On node 0 totalpages: 2211839
      DMA zone: 4096 pages, LIFO batch:1
      Normal zone: 225280 pages, LIFO batch:16
      HighMem zone: 1982463 pages, LIFO batch:16
    DMI 2.3 present.
    Using APIC driver default
    ACPI: RSDP (v002 HP                                    ) @ 0x000f4f20
    ACPI: XSDT (v001 HP     P50      0x00000002 Ò 0x0000162e) @ 0xdfff32b4
    ACPI: FADT (v003 HP     P50      0x00000002 Ò 0x0000162e) @ 0xdfff3334
    ACPI: SPCR (v001 HP     SPCRRBSU 0x00000001 Ò 0x0000162e) @ 0xdfff3140
    ACPI: MCFG (v001 HP     ProLiant 0x00000001  0x00000000) @ 0xdfff31c0
    ACPI: MADT (v001 HP     00000083 0x00000002  0x00000000) @ 0xdfff3200
    ACPI: SSDT (v001 HP        SSDTP 0x00000001 INTL 0x20030228) @ 0xdfff8000
    ACPI: DSDT (v001 HP         DSDT 0x00000001 INTL 0x20030228) @ 0x00000000
    ACPI: PM-Timer IO Port: 0x908
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Processor #0 15:4 APIC version 20
    ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
    ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
    Processor #6 15:4 APIC version 20
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    Processor #1 15:4 APIC version 20
    ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
    Processor #7 15:4 APIC version 20
    ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
    Enabling APIC mode:  Flat.  Using 0 I/O APICs
    ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
    ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
    IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
    ACPI: IOAPIC (id[0x0a] address[0xfec80400] gsi_base[48])
    IOAPIC[2]: apic_id 10, version 32, address 0xfec80400, GSI 48-71
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
    Built 1 zonelists
    Kernel command line: ro root=LABEL=/
    mapped APIC to ffffd000 (fee00000)
    Initializing CPU#0
    CPU 0 irqstacks, hard=c03f1000 soft=c03d1000
    PID hash table entries: 4096 (order: 12, 65536 bytes)
    Detected 3402.132 MHz processor.
    Using pmtmr for high-res timesource
    Console: colour VGA+ 80x25
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 8246340k/8847356k available (1884k kernel code, 75676k reserved, 759k da ta, 188k init, 7405512k highmem)
    Calibrating delay using timer specific routine.. 6805.31 BogoMIPS (lpj=3402659)
    Security Scaffold v1.0.0 initialized
    SELinux:  Initializing.
    SELinux:  Starting in permissive mode
    There is already a security framework initialized, register_security failed.
    selinux_register_security:  Registering secondary module capability
    Capability LSM initialized as secondary
    Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000
    CPU: After vendor identify, caps:  bfebfbff 20000000 00000000 00000000
    monitor/mwait feature present.
    using mwait in idle threads.
    CPU: Trace cache: 12K uops, L1 D cache: 16K
    CPU: L2 cache: 1024K
    CPU0: Initial APIC ID: 0, Physical Processor ID: 0
    CPU: After all inits, caps:        bfebf3ff 20000000 00000000 00000180
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
    CPU0: Thermal monitoring enabled
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Checking 'hlt' instruction... OK.
    CPU0: Intel(R) Xeon(TM) CPU 3.40GHz stepping 01
    per-CPU timeslice cutoff: 2924.57 usecs.
    task migration cache decay timeout: 2 msecs.
    Booting processor 1/1 eip 3000
    CPU 1 irqstacks, hard=c03f2000 soft=c03d2000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 6799.35 BogoMIPS (lpj=3399675)
    CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000
    CPU: After vendor identify, caps:  bfebfbff 20000000 00000000 00000000
    monitor/mwait feature present.
    CPU: Trace cache: 12K uops, L1 D cache: 16K
    CPU: L2 cache: 1024K
    CPU1: Initial APIC ID: 1, Physical Processor ID: 0
    CPU: After all inits, caps:        bfebf3ff 20000000 00000000 00000180
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
    CPU1: Thermal monitoring enabled
    CPU1: Intel(R) Xeon(TM) CPU 3.40GHz stepping 01
    Booting processor 2/6 eip 3000
    CPU 2 irqstacks, hard=c03f3000 soft=c03d3000
    Initializing CPU#2
    Calibrating delay using timer specific routine.. 6799.29 BogoMIPS (lpj=3399647)
    CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000
    CPU: After vendor identify, caps:  bfebfbff 20000000 00000000 00000000
    monitor/mwait feature present.
    CPU: Trace cache: 12K uops, L1 D cache: 16K
    CPU: L2 cache: 1024K
    CPU2: Initial APIC ID: 6, Physical Processor ID: 3
    CPU: After all inits, caps:        bfebf3ff 20000000 00000000 00000180
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#2.
    CPU2: Intel P4/Xeon Extended MCE MSRs (24) available
    CPU2: Thermal monitoring enabled
    CPU2: Intel(R) Xeon(TM) CPU 3.40GHz stepping 01
    Booting processor 3/7 eip 3000
    CPU 3 irqstacks, hard=c03f4000 soft=c03d4000
    Initializing CPU#3
    Calibrating delay using timer specific routine.. 6799.46 BogoMIPS (lpj=3399733)
    CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000
    CPU: After vendor identify, caps:  bfebfbff 20000000 00000000 00000000
    monitor/mwait feature present.
    CPU: Trace cache: 12K uops, L1 D cache: 16K
    CPU: L2 cache: 1024K
    CPU3: Initial APIC ID: 7, Physical Processor ID: 3
    CPU: After all inits, caps:        bfebf3ff 20000000 00000000 00000180
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#3.
    CPU3: Intel P4/Xeon Extended MCE MSRs (24) available
    CPU3: Thermal monitoring enabled
    CPU3: Intel(R) Xeon(TM) CPU 3.40GHz stepping 01
    Total of 4 processors activated (27203.42 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 pin1=2 pin2=-1
    checking TSC synchronization across 4 CPUs: passed.
    Brought up 4 CPUs
    zapping low mappings.
    checking if image is initramfs... it is
    Freeing initrd memory: 716k freed
    NET: Registered protocol family 16
    PCI: PCI BIOS revision 2.10 entry at 0xf0096, last bus=16
    PCI: Using MMCONFIG
    mtrr: v2.0 (20020519)
    mtrr: your CPUs had inconsistent fixed MTRR settings
    mtrr: probably your BIOS does not setup all CPUs.
    mtrr: corrected configuration.
    ACPI: Subsystem revision 20040816
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (00:00)
    PCI: Probing PCI hardware (bus 00)
    PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
    PCI: PXH quirk detected, disabling MSI for SHPC device
    PCI: PXH quirk detected, disabling MSI for SHPC device
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0.PCXA._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0.PCXB._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTB0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTB1._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 11) *3
    ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 11) *3
    ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *3
    ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *3
    ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *3
    ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 10 11) *3
    ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 11) *3
    Linux Plug and Play Support v0.97 (c) Adam Belay
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    PCI: Using ACPI for IRQ routing
    ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
    ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169
    ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 169
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
    ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
    ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 169
    ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
    ACPI: PCI interrupt 0000:00:1f.1[A]: no GSI
    ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 31 (level, low) -> IRQ 201
    ACPI: PCI Interrupt 0000:03:03.1[B] -> GSI 27 (level, low) -> IRQ 209
    ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 26 (level, low) -> IRQ 217
    ACPI: PCI Interrupt 0000:07:03.0[A] -> GSI 49 (level, low) -> IRQ 225
    ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 21 (level, low) -> IRQ 233
    ACPI: PCI Interrupt 0000:01:04.2[B] -> GSI 22 (level, low) -> IRQ 50
    PCI: Device 00:00 not found by BIOS
    apm: BIOS not found.
    audit: initializing netlink socket (disabled)
    audit(1194438049.334:1): initialized
    highmem bounce pool size: 64 pages
    Total HugeTLB memory allocated, 0
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    SELinux:  Registering netfilter hooks
    Initializing Cryptographic API
    ksign: Installing public key data
    Loading keyring
    - Added public key 4D76B5975078797C
    - User ID: Red Hat, Inc. (Kernel Module GPG key)
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    ACPI: Processor [CPU0] (supports C1)
    ACPI: Processor [CPU1] (supports C1)
    ACPI: Processor [CPU6] (supports C1)
    ACPI: Processor [CPU7] (supports C1)
    ACPI: Thermal Zone [THM0] (8 C)
    Real Time Clock Driver v1.12
    Linux agpgart interface v0.100 (c) Dave Jones
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled
    ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ttyS2 at I/O 0x3e8 (irq = 5) is a 16550A
    RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
    divert: not allocating divert_blk for non-ethernet device lo
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    ICH5: IDE controller at PCI slot 0000:00:1f.1
    PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
    ACPI: PCI interrupt 0000:00:1f.1[A]: no GSI
    ICH5: chipset revision 2
    ICH5: not 100% native mode: will probe irqs later
        ide0: BM-DMA at 0x0500-0x0507, BIOS settings: hda:DMA, hdb:DMA
        ide1: BM-DMA at 0x0508-0x050f, BIOS settings: hdc:pio, hdd:pio
    Probing IDE interface ide0...
    hda: HL-DT-STDVD-ROM GDR8162B, ATAPI CD/DVD-ROM drive
    hdb: SAMSUNG CD-ROM SC-148A, ATAPI CD/DVD-ROM drive
    Using cfq io scheduler
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Probing IDE interface ide1...
    Probing IDE interface ide1...
    ide2: I/O resource 0x3EE-0x3EE not free.
    ide2: ports already in use, skipping probe
    Probing IDE interface ide3...
    Probing IDE interface ide4...
    Probing IDE interface ide5...
    hda: ATAPI 40X DVD-ROM drive, 256kB Cache, UDMA(33)
    Uniform CD-ROM driver Revision: 3.20
    hdb: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(25)
    ide-floppy driver 0.99.newide
    usbcore: registered new driver hiddev
    usbcore: registered new driver usbhid
    drivers/usb/input/hid-core.c: v2.0:USB HID core driver
    mice: PS/2 mouse device common for all mice
    input: AT Translated Set 2 keyboard on isa0060/serio0
    input: PS/2 Generic Mouse on isa0060/serio1
    md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
    NET: Registered protocol family 2
    IP route cache hash table entries: 524288 (order: 9, 2097152 bytes)
    TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 262144 (order: 9, 3145728 bytes)
    TCP: Hash tables configured (established 262144 bind 262144)
    Initializing IPsec netlink socket
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    cpufreq: CPU0 - ACPI performance management activated.
    cpufreq: *P0: 3400 MHz, 103000 mW, 100 uS
    cpufreq:  P1: 2800 MHz, 74702 mW, 100 uS
    cpufreq: CPU1 - ACPI performance management activated.
    cpufreq: *P0: 3400 MHz, 103000 mW, 100 uS
    cpufreq:  P1: 2800 MHz, 74702 mW, 100 uS
    cpufreq: CPU2 - ACPI performance management activated.
    cpufreq: *P0: 3400 MHz, 103000 mW, 100 uS
    cpufreq:  P1: 2800 MHz, 74702 mW, 100 uS
    cpufreq: CPU3 - ACPI performance management activated.
    cpufreq: *P0: 3400 MHz, 103000 mW, 100 uS
    cpufreq:  P1: 2800 MHz, 74702 mW, 100 uS
    ACPI wakeup devices:
     
    ACPI: (supports S0 S4 S5)
    Freeing unused kernel memory: 188k freed
    SCSI subsystem initialized
    Fusion MPT base driver 3.02.73rh
    Copyright (c) 1999-2006 LSI Logic Corporation
    Fusion MPT SPI Host driver 3.02.73rh
    ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 31 (level, low) -> IRQ 201
    mptbase: Initiating ioc0 bringup
    ioc0: 53C1030: Capabilities={Initiator,Target}
    scsi0 : ioc0: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=201
      Vendor: HP        Model: Ultrium 1-SCSI    Rev: N27D
      Type:   Sequential-Access                  ANSI SCSI revision: 03
    ACPI: PCI Interrupt 0000:03:03.1[B] -> GSI 27 (level, low) -> IRQ 209
    mptbase: Initiating ioc1 bringup
    ioc1: 53C1030: Capabilities={Initiator,Target}
    scsi1 : ioc1: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=209
    Fusion MPT SAS Host driver 3.02.73rh
    HP CISS Driver (v 2.6.14.RH2)
    cciss: Device 0x46 has been found at bus 4 dev 4 func 0
    ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 26 (level, low) -> IRQ 217
    cciss: using DAC cycles
          blocks= 142253279 block_size= 512
          heads= 255, sectors= 32, cylinders= 17433
     
          blocks= 284506559 block_size= 512
          heads= 255, sectors= 32, cylinders= 34866
     
          blocks= 142253279 block_size= 512
          heads= 255, sectors= 32, cylinders= 17433
     
     cciss/c0d0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 >
          blocks= 284506559 block_size= 512
          heads= 255, sectors= 32, cylinders= 34866
     
     cciss/c0d1: p1 p2 p3 p4 < p5 >
    kjournald starting.  Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux:  Disabled at runtime.
    SELinux:  Unregistering netfilter hooks
    st: Version 20040403, fixed bufsize 32768, s/g segs 256
    Attached scsi tape st0 at scsi0, channel 0, id 3, lun 0
    st0: try direct i/o: yes (alignment 512 B), max page reachable by HBA 4294967295
    Attached scsi generic sg0 at scsi0, channel 0, id 3, lun 0,  type 1
    libata version 2.00 loaded.
    inserting floppy driver for 2.6.9-55.0.12.ELsmp
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a National Semiconductor PC87306
    tg3.c:v3.64-rh (July 31, 2006)
    ACPI: PCI Interrupt 0000:07:03.0[A] -> GSI 49 (level, low) -> IRQ 225
    divert: allocating divert_blk for eth0
    eth0: Tigon3 [partno(N/A) rev 1100 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000Ba seT Ethernet 00:0f:20:f8:c7:7e
    eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[0]
    eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
    shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
    shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
    shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
    shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
    shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
    shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
    hw_random hardware driver 1.0.0 loaded
    shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
    shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
    shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
    shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
    shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
    shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
    ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: irq 193, pci mem f8886000
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    PCI: cache line size of 128 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 8 ports detected
    USB Universal Host Controller Interface driver v2.2
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: irq 169, io base 00002000
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: irq 177, io base 00002020
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: irq 185, io base 00002040
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 169
    uhci_hcd 0000:00:1d.3: UHCI Host Controller
    PCI: Setting latency timer of device 0000:00:1d.3 to 64
    uhci_hcd 0000:00:1d.3: irq 169, io base 00002060
    uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    md: Autodetecting RAID arrays.
    md: autorun ...
    md: ... autorun DONE.
    usb 5-1: new low speed USB device using address 2
    input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.3-1
    ACPI: Power Button (FF) [PWRF]
    EXT3 FS on cciss/c0d0p6, internal journal
    device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com
    kjournald starting.  Commit interval 5 seconds
    EXT3 FS on cciss/c0d0p1, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting.  Commit interval 5 seconds
    EXT3 FS on cciss/c0d0p9, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting.  Commit interval 5 seconds
    EXT3 FS on cciss/c0d0p7, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting.  Commit interval 5 seconds
    EXT3 FS on cciss/c0d0p8, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting.  Commit interval 5 seconds
    EXT3 FS on cciss/c0d0p5, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting.  Commit interval 5 seconds
    EXT3 FS on cciss/c0d0p3, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting.  Commit interval 5 seconds
    EXT3 FS on cciss/c0d1p1, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting.  Commit interval 5 seconds
    EXT3 FS on cciss/c0d1p2, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting.  Commit interval 5 seconds
    EXT3 FS on cciss/c0d1p3, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting.  Commit interval 5 seconds
    EXT3 FS on cciss/c0d1p5, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    Adding 4194232k swap on /dev/cciss/c0d0p2.  Priority:-1 extents:1
    IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
    microcode: CPU0 not 'upgrading' to earlier revision 0x12 (current=0x17)
    microcode: CPU1 not 'upgrading' to earlier revision 0x12 (current=0x17)
    microcode: CPU2 not 'upgrading' to earlier revision 0x12 (current=0x17)
    microcode: CPU3 not 'upgrading' to earlier revision 0x12 (current=0x17)
    microcode: CPU0 already at revision 0x17 (current=0x17)
    microcode: CPU1 already at revision 0x17 (current=0x17)
    microcode: CPU2 already at revision 0x17 (current=0x17)
    microcode: CPU3 already at revision 0x17 (current=0x17)
    microcode: No new microdata for cpu 2
    microcode: No new microdata for cpu 0
    microcode: No new microdata for cpu 1
    microcode: No new microdata for cpu 3
    IA-32 Microcode Update Driver v1.14 unregistered
    parport0: PC-style at 0x378 [PCSPP,TRISTATE]
    ip_tables: (C) 2000-2002 Netfilter core team
    ip_tables: (C) 2000-2002 Netfilter core team
    NET: Registered protocol family 10
    Disabled Privacy Extensions on device c03462c0(lo)
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    IPv6 over IPv4 tunneling driver
    divert: not allocating divert_blk for non-ethernet device sit0
    tg3: eth0: Link is up at 1000 Mbps, full duplex.
    tg3: eth0: Flow control is off for TX and off for RX.
    ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    i2c /dev entries driver
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    eth0: no IPv6 routers present
    mtrr: type mismatch for fc000000,800000 old: uncachable new: write-combining
    mtrr: type mismatch for fc000000,800000 old: uncachable new: write-combining
    st0: Block limits 1 - 16777215 bytes.

Liens sociaux

Règles de messages

  • Vous ne pouvez pas créer de nouvelles discussions
  • Vous ne pouvez pas envoyer des réponses
  • Vous ne pouvez pas envoyer des pièces jointes
  • Vous ne pouvez pas modifier vos messages
  •