k3b : impossible de graver [Résolu]

[linuxdeslandes]

Bonjour à tous, voilà mon souci :
je n'arrive pas à graver un disque avec k3b, en user ou en root
mon graveur est bien reconnu. le journal de bogues affiche ceci :

System
-----------------------
K3b Version: 0.12.17

KDE Version: 3.5.4
QT Version: 3.3.6
Kernel: 2.6.17-11mdv
Devices
-----------------------
HL-DT-ST DVDRAM GSA-4082N HR02 (/dev/sr0, /dev/sg1) at /mnt/cdrom [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD-R DL; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R séquentiel; DVD-R double couche séquentiel; DVD-RAM; DVD RW à réinscription limitée; DVD-RW séquentiel; DVD+RW; DVD+R; DVD+R double couche; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Réinscription restreinte]

Used versions
-----------------------
cdrecord: 2.1.1a11

cdrecord
-----------------------
/usr/bin/cdrecord: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits./usr/bin/cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2).
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.33
SCSI buffer size: 64512
Cdrecord-ProDVD-Clone 2.01.01a11 (i686-pc-linux-gnu) Copyright (C) 1995-2006 Jörg Schilling
TOC Type: 0 = CD-DA
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4082N'
Revision : 'HR02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: CD-R
Profile: DVD-RAM
Profile: DVD-R sequential recording
Profile: DVD-R/DL sequential recording
Profile: DVD-RW sequential overwrite
Profile: DVD-RW restricted overwrite
Profile: DVD+RW
Profile: DVD+R
Profile: DVD+R/DL
Profile: DVD-ROM
Profile: CD-R (current)
Profile: CD-RW
Profile: CD-ROM
Profile: Removable Disk
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive pbuf size: 1966080 = 1920 KB
FIFO size : 10485760 = 10240 KB
pregap1: -1
Track 01: audio 39 MB (03:57.22) no preemp swab copy
Track 02: audio 39 MB (03:57.46) no preemp swab copy
Track 03: audio 52 MB (05:14.92) no preemp swab copy
Track 04: audio 28 MB (02:48.53) no preemp swab copy
Track 05: audio 66 MB (06:32.60) no preemp swab copy
Track 06: audio 46 MB (04:36.20) no preemp swab copy
Track 07: audio 48 MB (04:49.89) no preemp swab copy
Track 08: audio 50 MB (05:00.33) no preemp swab copy
Track 09: audio 55 MB (05:27.37) no preemp swab copy
Track 10: audio 47 MB (04:40.49) no preemp swab copy
Track 11: audio 58 MB (05:48.57) no preemp swab copy
Total size: 537 MB (53:13.61) = 239521 sectors
Lout start: 537 MB (53:15/46) = 239521 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type B, low Beta category (B-) (4)
ATIP start of lead in: -11768 (97:25/07)
ATIP start of lead out: 359775 (79:59/00)
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 64
Manufacturer: MPO
Blocks total: 359775 Blocks current: 359775 Blocks remaining: 120254
Starting to write CD/DVD at speed 10 in real TAO mode for single session.
Last chance to quit, starting real write in 3 seconds.
2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Starting new track at sector: 0
Track 01: 0 of 39 MB written.
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 00 87 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 30 02 80 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63504
cmd finished after 0.016s timeout 40s
/usr/bin/cdrecord: The current problem looks like a buffer underrun.
/usr/bin/cdrecord: It looks like 'driveropts=burnfree' does not work for this drive.
/usr/bin/cdrecord: Please report.
/usr/bin/cdrecord: Make sure that you are root, enable DMA and check your HW/OS set up.
write track data: error after 317520 bytes
Writing time: 14.932s
Average write speed 215.1x.
Fixating...
Fixating time: 27.645s
/usr/bin/cdrecord: fifo had 165 puts and 6 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 2 times full, min fill was 97%.

cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=1,0,0 speed=10 -tao driveropts=burnfree -eject fs=10m -useinfo -audio -shorttrack /home/pascalou/tmp/kde-pascalou/k3b_audio_1_01.inf /home/pascalou/tmp/kde-pascalou/k3b_audio_1_02.inf /home/pascalou/tmp/kde-pascalou/k3b_audio_1_03.inf /home/pascalou/tmp/kde-pascalou/k3b_audio_1_04.inf /home/pascalou/tmp/kde-pascalou/k3b_audio_1_05.inf /home/pascalou/tmp/kde-pascalou/k3b_audio_1_06.inf /home/pascalou/tmp/kde-pascalou/k3b_audio_1_07.inf /home/pascalou/tmp/kde-pascalou/k3b_audio_1_08.inf /home/pascalou/tmp/kde-pascalou/k3b_audio_1_09.inf /home/pascalou/tmp/kde-pascalou/k3b_audio_1_10.inf /home/pascalou/tmp/kde-pascalou/k3b_audio_1_11.inf

Merci de m'éclaicir, à bientôt !

[deny]

salut
ferme k3b
ensuite en console et sous root saisit
ulimit -l unlimited

[linuxdeslandes]

désolé mais ça ne marche pas, k3b m'indique une erreur d'entrée/sortie "peu importante"(!?!)... si peu importante que je ne peux pas graver !

[deny]

probleme de perm peut être
as tu essayé en root

chmod +s /usr/bin/cdrecord

[kromartien]

Problème peut être de drivers installés/non installés pour le disque. k3b n'est qu'un front-end à d'autres logiciels, c'est peut être un cdrdao ou un dvd+rw-tools qui n'est pas installé.

[linuxdeslandes]

...Evidemment que ça ne marche pas quand on crée un CD audio en essayant de graver des fichiers .ogg !
Alors mille excuses pour le dérangement
et surtout un grand MERCI à ceux qui ont tenté de m'aider .
à bientôt !

[troumad]

Ceci dit, il y a une option (je ne sais où) qui permet de traduire à la volée les ogg et les mp3 pour faire un disque audio !

[linuxdeslandes]

je vais examiner la chose des près .