Bonjour,
J'ai malencontreusement effacé l'ios de mon bootflash présent sur le catalyst. mais j'ai plus au moins réussi a réinitialiser cette erreur
pour résumer la manip au niveau de la rom
Code :
1 2 3
| rommon> set ip address
rommon> set ip route
rommon> boot tftp://serveur/image.bin |
jusque la tout va bien, je boot sur l'image mis a disposition sur mon serveur tftp
c'est maintenant que les choses se corsent.
Je peux me connecter via telnet sur mon swtich, y faire les manip que je veux, mais il m'est impossible de pinger le réseau depuis mon switch
sauf qu'avec ma vrf ça marche nickel
Code :
1 2 3 4 5 6 7 8 9 10 11 12
| Switch#ping vrf mgmtVrf
Protocol [ip]:
Target IP address: xx.xx.xx.xx (gateway)
Repeat count [5]:
Datagram size [100]:
Timeout in seconds [2]:
Extended commands [n]:
Sweep range of sizes [n]:
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to xx.xx.xx.xx, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms |
Code :
1 2 3 4 5 6
| Switch#ping xx.xx.xx.xx (gateway)
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to xx.xx.xx.xx, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5) |
Je ne comprends ou est ce que ca coince, je n'arrive pas appaser le moindre ping... embêtant pour récupérer et installer l'ios
ma conf, de ce qu'il y a de plus basique :
Code :
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58
| no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
!
hostname Switch
!
boot-start-marker
boot-end-marker
!
enable password xxxxxxx
!
!
!
no aaa new-model
ip subnet-zero
ip domain-name toto.fr
ip name-server xx.xx.xx.xx
!
!
ip vrf mgmtVrf
!
vtp mode transparent
!
power redundancy-mode redundant
!
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
!
!
interface FastEthernet1
ip vrf forwarding mgmtVrf
ip address xx.xx.xx.xx 255.255.252.0
speed auto
duplex auto
interface Vlan1
ip address xx.xx.xx.xx 255.255.252.0
!
ip default-gateway xx.xx.xx.xx
no ip http server
!
!
!
!
line con 0
stopbits 1
line vty 0 4
password xxxxxx
login
!
end |